Question about RCA HD52W59 HDTV Projection Television

1 Answer

Rca hd52w67 my rca hd52w67 will not turn on. I bought it brand new, and use it for maybe 3 months and after that I put it in storage for a long while. I have it out of staorage and when I plugged it up, and push the power button, it illuminates for about ten seconds and goes off. When I try to push the button again, it wont power until after 30 seconds and then the power light comes on, and repeat, but it never comes on. What seems to be the problem?

Posted by on

  • goneredfishi Oct 20, 2008

    I have a rcahd52w59 april2005 production, the problem i am having is one day the tv would not come on so i trouble shot it and unpluged the tv and let it set for a few days. It came back on but half way through the day it automaticly shut off during watching, so i did the same process and left it unpluged for approx. 30 min and it took about 5 min to automaticly shut itself off. Can you help me out with this problem. Thank You and have a good day.

  • costabellab Oct 21, 2008

    I hear a "sizzling" nose when I turn mine on... then after about 3-5 seconds, the light goes out. Can you tell me where to get an ignition panel?



    Thanks!!!

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • RCA Master
  • 1,800 Answers

The ignition panel ve been coruptted
replace it

dont forhet to rate me!!

Posted on Aug 19, 2008

3 Suggested Answers

  • 521 Answers

SOURCE: hdtv wont turn on

its the problem in your powersupply board.may be one of the capacitor have gone short due to moisture or because of rare use .when you on the tv after many days the curren load passed through it was very much at that particular time.and the capacitor have gone short.you can replace the capacitor your self with the help of soldering iron.if you have any knowledge about it .or a technician help is much advisable.the charges will not more then his service charge.if the tv is under warranty period call the service center it would be free of cost.thanks.rate the solution if helped.keep me updated for further help.bye.

Posted on Aug 20, 2008

  • 1 Answer

SOURCE: hd52w67

No! The solution wasnt helpful. It wasnt the problem you said that it was. I took off the back cover, and push the reset button and it came on. Thanks anyway.

Posted on Aug 21, 2008

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have rca tv model#hd52w67 when i turn it on the power light blinks on & off about three times then cuts off


This is what RCA (Thompson) calls the three strikes and you are out.

If a problem: set will attempt to turn on 3 times and then go into shutdown which indicates a short somewhere.

It will require a shop repair as this set is not usually repairable in the home.

Let me know if you have questions.

Feb 26, 2012 | RCA Televison & Video

2 Answers

Hdtv wont turn on


moisture might be the problem check circuit board

Aug 20, 2008 | RCA HD52W66 Projection Television

1 Answer

RCA hd52w67 analog convergence problem.


with Tv off press and hold ch- and vol- at same time untill tv turns on then release and you should be in factory settings service mode.

May 26, 2010 | Televison & Video

1 Answer

I have an RCA HD52W67 and it just started to have


I'm having the same problem with my RCA HD52W67 rear projection TV and I've notice this problem is listed with my other owners of this product. I have no experience with fixing electronics. Sould I try this myself or take it to an expert? Has anyone fixed this problem? What is an estimated cost involved, if I take my set to an expert? Any advice with the HD52W67 is great appreciated.

Mar 19, 2010 | RCA HD52W59 HDTV Projection Television

1 Answer

Bought a fairly used 2003 HDTV 4 months ago, Didnt come with remote but got a Universal I used that worked, my friend took the batteries out for a while for something else, we put the batteries back in...


Hard to say what the code is without knowing the model number of the remote and the brand of TV.

RCA's website has a remote code finder you can use.

Good luck!

Dec 17, 2008 | RCA Universal Remote 3 Device Remote...

1 Answer

Hd52w67


No! The solution wasnt helpful. It wasnt the problem you said that it was. I took off the back cover, and push the reset button and it came on. Thanks anyway.

Aug 20, 2008 | RCA HD52W59 HDTV Projection Television

2 Answers

HDTV R52WH74 TV WILL NO TURN ON


I would contact RCA support, and they should be able to provide you with the authorized RCA service centers in your area.This is the RCA customer Service number 580-634-0151

Jul 08, 2008 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

My HD52W67 has concaved picture


This is a convergence problem and can be repaired relatively easily. If you can solder, you can fix this yourself. First try resoldering the pins on the convergence ICs. If that fails to resolve the problem, replace the ICs. These are large black ICs attached to a heat sink and should be marked STKxxx.

Keep us posted.
Dan

Jun 25, 2008 | RCA HD52W66 Projection Television

1 Answer

MY TV WONT WORK, I NEED A NUMBER FOR RCA. IT IS ONLY 5 MONTHS OLD, BOUGHT BRAND NEW, NOW IT WON'T TURN ON


Did you buy the walmart special,the ones they had on sale for 780.00, RCA has produce a nightmare these sets have all kind of problems.

Jun 12, 2008 | RCA Televison & Video

3 Answers

RCA HD52W67 Projection TV


open it up and you will see the burn marks pull the board and re solder it the hole in the board

Feb 23, 2008 | RCA HD52W59 HDTV Projection Television

Not finding what you are looking for?
RCA HD52W59 HDTV Projection Television Logo

Related Topics:

435 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73086 Answers

matt martin
matt martin

Level 3 Expert

1207 Answers

Jaime Hernandez

Level 3 Expert

2307 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...