Question about Hitachi STARBOARD BT-1 FREEDOM TABLET (BTTABLET)

1 Answer

Notepad 'floating' in the way

Just got starboard bt-2 GM, software 2-10 LE for Mac. I kept stylus buttons at default, but have very hard time keeping a yellow notepad type 'floater' from taking over the screen.
Searched manuals & website for info... not even mentioned as a tool??
any help is much appreciated..... can't really use the other tools with that in the way. (using tablet to control mac laptop OS 10.4.11... not a whiteboard)

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

On the mac, it was an interaction with the 'Inkwell' handwriting recognition software. I turned that off in System Pref's. It may have actually only been the check box 'in any application' rather than completely off.
So Starboard works great now!
thanks

Posted on Aug 19, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Turns hard to starboard when in auto


Verify that it is configured for your installation. Some units can be installed either on the port or starboard side, and they have to be programmed accordingly. Verify this in the user's manual.

Jul 04, 2013 | Raymarine St8002 Smartpilot Autopilot...

Tip

Htc hard reset


1.Press and hold the TALK and END buttons, and at the same time, use the stylus to press the RESET button at the bottom of your device.2.Release the stylus, but continue pressing the TALK and END buttons until you see the following message on the screen:This operation will delete all your personal data, and reset all settings to manufacturer default. Press Action to restore manufacturer default, or press other keys to cancel.
3.Release the TALK and END buttons, and then press ENTER on your device

on Mar 10, 2010 | Cell Phones

1 Answer

Cant print anymore print counting is almost full. how to reset count


try this

Manual reset methods several EPSON Stylus Color. Actually there are two methods to reset epson printers counter, that is using software resetter such as adjustment program or SSC service utility or using manual by combination pressing button on the printer. If Reset using software resetter you can follow the way of usage the software but sometimes software resetter for the printer is not available. The only way to reset the printer if software resetter not available you can use manual reset.
The Following manual reset for some EPSON Stylus Color Printers:
1. EPSON Stylus Color
Pressing and holding ALT+FONT+LOAD+PAUSE buttons combination
press POWER button
Release all buttons
2. EPSON Stylus Color 300
3. EPSON Stylus Color 400, 600
Pressing and holding LOAD/EJECT and CLEANING buttons
press POWER button and hold it until you will see blinking INK OUT and PAPER OUT leds
Release all buttons
In 2-3 seconds time press LOAD/EJECT and CLEANING buttons again.
4. EPSON Stylus Color 440, 640, 740, 460, 660, 670, 760, 860, 880, 1160
Pressing and holding LOAD/EJECT and CLEANING buttons
press POWER button and hold it until You will see blinking INK OUT and PAPER OUT leds.
Release all buttons.
In 2-3 seconds time press and hold CLEANING button, until all leds will blink.
5. EPSON Stylus Color 680
Pressing and holding LOAD/EJECT and CLEANING buttons,
press POWER button and hold it until You will see blinking INK OUT and PAPER OUT leds.
Release all buttons.
In 2-3 seconds time press and hold LOAD/EJECT button, until all leds will blink.
6. EPSON Stylus Photo 785, 895
Pressing and holding Maintenance and Roll Paper buttons
press POWER button, You will see blinking Error led.
Release all buttons.
In 2-3 seconds time until led is blinking press and hold for 10-12 seconds Roll Paper button, until all leds will blink.
7. EPSON Stylus Photo 890, 1280, 1290
Pressing and holding Maintenance and Roll Paper buttons, press POWER button, You will see blinking Power led
Release all buttons
In 2-3 seconds time until led is blinking press and hold for 10-12 seconds Roll Paper button, until all leds will blink
In 2-3 seconds time press LOAD/EJECT and CLEANING buttons again.
8. EPSON Stylus Color 800, 850
Pressing and holding LOAD, CLEANING Color and CLEANING Black buttons
press POWER button and hold it until You will see blinking INK OUT and PAPER OUT leds.
Release all buttons.
In 2-3 seconds time press and release CLEANING Color button, You will see leds blinking.
9. EPSON Stylus Color 900, 980
Pressing and holding LOAD/EJECT and CLEANING buttons
press POWER button, You will see blinking INK OUT led
Release all buttons
In 2-3 seconds time press and hold CLEANING button for 10-12 seconds.
10. EPSON Stylus Color 3000
Pressing and holding PAUSE, LF/FF and DOWN ARROW buttons
turn on printer.
Release all buttons.

Mar 17, 2011 | Computers & Internet

1 Answer

Sofware as well as hardware problem... help me plz


  1. Press and hold the Left SOFT KEY and the Right SOFT KEY, and at the same time, use the stylus to press the RESET button at the lower left side of your device.
  2. Release the stylus, but continue pressing the two soft key buttons. Release them only when you see the following message on your device screen: “Press Send to restore manufacturer default, or press other keys to cancel.“
  3. Press on your device. Warning! Your device will be set back to factory default settings. Please ensure any additional installed programs and/or user data have been backed up before a hard reset is performed.

Mar 25, 2010 | HTC P3300 Smartphone

1 Answer

How do i restore the factory settings on a ppc6800/htc mogul


Hi, Welcome to FixYa
1.) Press and hold both softkeys on the device. Keep these keys
pressed,and at the same time, use the stylus to lightly press
and hold the RESET button on the bottom of your device.
2.) Release the stylus but keep the softkeys pressed when you
see the following message on your device screen:
“Do you want to erase all user data and restore to manufacture default?”
3.) Slide open the hardware keyboard, and press 'R' to restore to factory default or press 'X' to exit the hard reset process.

-------------------------------------------------------
We need your feedback for our improvement.
If you are helped with the post please select 'YES'

Jul 09, 2009 | Cell Phones

1 Answer

New to htc


The half-white screen is definitely not a good sign. The "hold and tap" screen you see is the alignment screen normally seen at a "fresh" startup.

If this is the PPC6800 Mogul, there is a small pinhole reset button on the bottom of the unit. Using the stylus, push the button, This will "soft reset" the unit.

If this doesn't work, you can try hard resetting it:

1. Press and hold both softkeys on the device. (The soft keys are the buttons to the left and right of the center navigation wheel with the white dots on them) Keep these keys pressed, and at the same time, use the stylus to lightly press and hold the RESET button on the bottom of your device.

2. Release the stylus but keep the softkeys pressed when you see the following message on your device screen:
“Do you want to erase all user data and restore to manufacture default?”
3. Slide open the keyboard, and press R to restore to factory default or press X to exit the hard reset process.

This may take a few tries, as it's hard to hold the buttons and push the reset button.

Jun 11, 2008 | HTC TyTN Smartphone

3 Answers

HARD RESET MY 02 XDA SMARTPHONE


To perform a hard reset
1. Press and hold the Left SOFT KEY and the Right SOFT KEY, and at the
same time, use the stylus to press the RESET button at the lower left

2. Release the stylus, but continue pressing the two soft key buttons.
Release them only when you see the following message on your
device screen:
“Press Send to restore manufacturer default, or press other keys to
cancel.“

3. Press send on your device.

Jun 01, 2008 | O2 Xda Orbit Smartphone

3 Answers

Hard Reset


To do a Hard Factory Reset:
Simultaneously press the Suspend/Resume (END) button whilst pressing the stylus tip into the reset opening.
end_button.jpg reset_button.jpg Keep them held until the screen comes back on. Then release the buttons
You will get the Boot options:
  • CLEAN REGISTRY - This resets the device to factory settings, losing applications but keeps the data intact.
  • FACTORY DEFAULTS - This completely wipes everything and resets the device back to it's factory defaults.
  • SKIP
    Try Clean Registry first.
  • Jan 13, 2008 | Fujitsu Siemens Pocket LOOX T830...

    Not finding what you are looking for?
    Computers & Internet Logo

    164 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Hitachi Computers & Internet Experts

    Brian Sullivan
    Brian Sullivan

    Level 3 Expert

    27725 Answers

    yadayada
    yadayada

    Level 3 Expert

    70387 Answers

    Fotis Papastamatiou

    Level 2 Expert

    96 Answers

    Are you a Hitachi Computer and Internet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...