Question about Hitachi 51F500 51" Rear Projection HDTV-Ready Television

1 Answer

Lock access code

I cant remember my code and cant access

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 54 Answers

Just follow the steps carefully and you should be up and running again. Thanks for the model number.

1) To reset/change the SMART LOCK code, follow these steps.

Press the MENU button on the remote to display the on-screen menu.

Press the Cursor Up (also known as CH + button, above menu button) or Cursor Down (CH - below the menu button) to highlight SMART LOCK. Then press the Cursor Right (VOL + button to right of menu button) to display the SmartLock ACCESS CODE screen.

Using the numbers on the remote keypad, enter 0 7 1 1. " INCORRECT CODE" will appear on the screen. Enter the code 0 7 1 1 again.

Cursor Down to CHANGE CODE and enter 0 7 1 1 and then CONFIRM CODE and enter 0 7 1 1.

Press the STATUS / EXIT button (left of CH +) to save the new code in memory.

2) If the grandkids have locked out any channels, then you will have to perform the following steps:

Press MENU, highlight SMART LOCK, right arrow, enter 0 7 1 1, confirm by entering 0 7 1 1 again.
Cursor to BLOCKING OPTIONS, right arrow, and highlight CLEAR ALL, right arrow.

You should then see CHANNEL....ALL, LOCK....YES, ALL UNLOCKED.

3) To turn SMART LOCK off, follow these steps.

Press MENU, highlight SMART LOCK, right arrow, enter 0 7 1 1, confirm by entering 0 7 1 1 again.
Cursor to BLOCKING OPTIONS, right arrow, and highlight BLOCKING OPTIONS, right arrow,

Posted on Aug 19, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tv screen is locked with a four digit code


4 digit Parent Lock code to access Parent Mode. Enter your code.

Oct 02, 2016 | Projection Televisions

1 Answer

I HAVE A MITSUBISHI (MEDALLION MODEL TV).THE V-CHIP IS ON AND I CANT RELEASE THE V-CHIP BECAUSE A CODE IS NEEDED. IS THERE AN OVERRIDE CODE THAT CAN BE USED TO CLEAR THE VCHIP?


Mitsubishi sets use a four-digit code for a V-Chip locked program, view a locked TV, cancel the lock, or to enter the V-Chip lock menus. You can view the locked shows on the TV set by pressing the number 9 and QV buttons on the remote at the same time, whenever your code is requested. This process temporarily unlocks the TV and asks you to enter a new code.

Oct 02, 2008 | Mitsubishi Projection Televisions

4 Answers

Kids locked TV. How do I un-lock it? TV is: "APEX Mod. AT2002".


did you still remember the code that store on your tv.. if this code was change.

Sep 10, 2008 | Projection Televisions

1 Answer

Cant turn on set and remote wont work, how can I reset tv and remote to work after our grandchildren locked the fromt buttons ans remote?


hello it sound like the key lock has been activated

The TV can be set up so that it can only be operated with

the remote control.

This feature can be used to prevent unauthorized viewing.

This TV is programmed to remember which option it was
last set to even if you turn the TV off.

Press the MENU button on the remote

control, then use the UP/DOWN arrow

button to select the Special menu.

Press the RIGHT arrow button to activate

the Special menu.

Use the UP/DOWN arrow button to

choose Key lock, then press the RIGHT

arrow button.

Use the UP/DOWN arrow button to select

On or Off.

Press EXIT button to save and return to

TV viewing or press the MENU button to

save and return to the previous menu.

1

2

3

4

5

The TV can be set up so that it can only be operated with

the remote control.

This feature can be used to prevent unauthorized viewing.

This TV is programmed to remember which option it was

last set to even if you turn the TV off.

Language

Main Source

PIP Source

Captions

Caption/Text

ARC

Key lock G

Auto Convergence

Auto Move

F Back Next G

SETUP

VIIDEO

AUDIIO

TIIME

LOCK

SPECIIAL

On

Off

With the KEY LOCK ON, the display

'KEY LOCK' appears on the screen if

any button on the front panel is

pressed while viewing the TV.

This TV is programmed to remember

which option it was last set to
even if you turn the TV off. good luck

regards
shaun

Dec 12, 2010 | Zenith R56W36 56" Rear Projection...

1 Answer

Locked out of a 60 inch tv need a code. We need the code to get back into the tv to set it up.


Hi,

Please follow the below steps

1. Press menu and press right or left button until the Lock menu appears
2. Press up or down button to display code entering mode.

Blocking reset status:
Set four digit code by pressing number buttons and presses ENTER

If code already stored:
Press the four digit code and press ENTER.

3.If you cannot remember the stored code press recall button four times within 5 seconds.
PIN will be released (blocking reset status restored).

Thanx

Jul 26, 2010 | Toshiba 42H81 42" Rear Projection...

1 Answer

Magnavox child lock help


hello The parental control menu enables
you to limit access to programs that
may contain objectionable material
or are not suitable for viewing by
children. The default access code is
0711
may contain objectionable material
or are not suitable for viewing by
children. The default access code is
0711.
The following table provides details
about the menu items:
Component Function Range / Options
Lock Enable
Enables the parental control lock. When
enabled, channels with objectionable viewing
content are blocked and can only be
accessed with a password. You can block
channels according to the movie or TV ratings
of the channel’s programs.
Off, On
Movie Rating Helps you block programs based on their
movie ratings. See “Movie Rating” on
page 25 for more details.

TV Rating Helps you block programs based on their TV
ratings. See “TV Rating” on page 26.

Change Code Changes the password for the parental control
lock.
Press the number keys to
change the password.
Reset Resets all channels and programs to their
default factory settings.


regards
shaun
Parental Control Menu
Lock Enable
Change Code
Reset
Back
Main Menu
Picture
Sound
Size
PIP/PBP
Parental Control
Channel Setup
Setup
Exit
Press Right to Enter
Press Right to Enter
Press Right to Enter
Press New Code
Off On
TV Rating
Movie

Mar 13, 2010 | Philips Magnavox 50ML8105D 50" HDTV DLP TV

1 Answer

Need to reset parental locks .tv is locked out


HELLO If you forget your ACCESS CODE NUMBER, use the factory code 7777 to erase your key number. This will
reset the access code number back to the factory pr eset (0000).

shaun

Nov 17, 2009 | Hitachi 65F59 65" HDTV

1 Answer

Parental pin


Hi!

To unlock your set requires two steps: the first is to get past the lock screen.To do that, press the QV( or previous channel?) and 9 buttons at the same time when you are asked to enter your lock code.
Now that you're past the lock screen, find the menu that covers locking and unlocking. QV/9 (previous channel/9) is a one-time bypass; if you turn the set off, it'll be locked again when you turn it on, so you first need to LOCK it again, with a pass code you can remember (try 1,1,1,1). Once you lock it, you can exit from all the menus, then try to change inputs. It'll ask for a pass code, which you now know!

Please ask for further clarifications and rate the solution as Fixya if found useful.

Thanks
Rylee

Mar 14, 2009 | Mitsubishi WS-55513 55" Rear Projection...

1 Answer

Child Lock is on and I am second owner of tv with no code


This function will block out the picture and sound of the selected channel or video input.
It can also be used to keep the TV from being viewed for a scheduled time period that you set.
The code to enter the Locks feature is a four digit secret code number. The factory preset code is 0000.
Use the number buttons to select access code.

Use CURSOR G or H to highlight function and then press the SELECT button.
To change the access code number, select Change Access Code. Enter a new four digit key number you prefer.
Select CHANGE ACCESS CODE to change factory preset code (0000) to your preference.
When ENGAGE LOCK is selected, SET CHANNEL LOCK, SET INPUT LOCK, and SET FRONT PANEL LOCK can be set individually.
When SET CHANNEL LOCK is turned on, the picture and sound for the chosen channel will be blocked out.
When SET INPUT LOCK is turned on, the picture and sound for all video inputs and the picture and sound for channels 3, 4 will be
blocked out.
When FRONT PANEL LOCK is turned on, all buttons on the Front Panel will be deactivated, except the Power button.
When TV TIME LOCK is turned on (r TIME LOCK) you can set the BEGIN and END times (CURSOR E) and the TV
cannot be viewed during that time period (Set clock first). Use CURSOR G or H to highlight ONCE (TV will time out one time
only), DAILY (TV will time out every day), WEEKLY - SUN~WEEKLY - MON (TV will time out one time a week) or OFF (to disable
this function).
When MOVIE RATINGS is selected, you can block various types of movies and video tapes based on motion picture ratings. Picturein-
Picture will also be blocked automatically (see page 45).
When TV RATINGS is selected, various types of television programming based on a parental guide ratings will be blocked.
Picture-in-Picture will also be blocked automatically
If you forget your secret code, use the factory code 7777 to erase your key number. This will reset the secret code number back to the
factory preset 0000.
Press EXIT to quit the menu.

Dec 07, 2008 | Hitachi 57F500 57" Rear Projection...

1 Answer

PANASONIC PT47WX54J


If you do not remember your code, LOCK will unlock in
12, 24, or 48 hours, depending on the current set-up. Be
cautious when selecting ALWAYS. If ALWAYS is
selected and you forget your secret code, the TV must
be serviced by a qualified technician to clear the LOCK
set-up.
• If you select CHANGE CODE, and you change your
code from the one used in the LOCK menu, your new
code becomes the controlling code.

Dec 05, 2007 | Panasonic PT-56HX41 56" Rear Projection...

Not finding what you are looking for?
Hitachi 51F500 51" Rear Projection HDTV-Ready Television Logo

294 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Hitachi Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...