- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Felix try ,system menu, look if color system program is ntsc or pal,or what ever suitable in your area, if not may some thing lost contact at the vertical amplifier, rolling picture is occured..
Dec 28, 2013
OK, ITS A RELIC CRT MONITOR.
OVER 16 YEARS OLD? TODAY.
why not do like all others did back in 2010 upgrade to LED LCD
frankly your lucky it glows at all and not catch fire.
unplug it from the wall
for say 1hr and try again.
lock might happen.
like this, enter the 21 century bold and new, and hope.
most Samsung phones have the ability to change the image orientation whilst camera is active. Turn on your camera as if you was going to take a picture. With the camera image on screen locate the up/down keys on the side of your phone (also used as volume control) using up/down buttons you will find that one button rotates image and the other inverts the image (back to front, like mirror image). This normally solves this issue on Samsungs but if this doesnt solve it (which I expect it will) there is a possibilty of the phone being faulty and may need factory reset? Hope that helps?
Your monitor is having thermal problems. Some part in the horizontal circuit is changing value as it warms up, and you're seeing the effect. It's possible to troubleshoot this kind of problem by using spray chiller to cool down parts and find the culprit, but labor and parts would probably mean you're better off just replacing it. New LCD's are quite cheap today, and you'll gain extra space on your desk if you get one.
There's a button on the original remote control that does exactly that:
(Please vote or comment if my solution helped you!)
Adjusting PICTURE FLIP Settings
You can set the orientation of the picture.
Directly setting the PICTURE FLIP
1 Press PIC. FLIP to display the
PICTURE FLIP screen.
2 Press PIC. FLIP to change the
Setting the PICTURE FLIP on the
1 Press MENU to display the MENU
2 Press a/b to move the cursor to
PRESET, and press ENTER.
3 Press a/b to move the cursor to
PICTURE FLIP, and press
4 Press c/d to select the desired
picture flip setting, and press
5 Press MENU to return to the main
NORMAL MIRROR ROTATE
The PICTURE FLIP screen automatically
disappears in 3 seconds.
• [NORMAL]: normal image
[MIRROR]: mirror image
[ROTATE]: rotated image
[UPSIDE DOWN]: upside down image
The first thing I would do is a reset. Read your manual about this process, which often requires pressing two buttons at the same time or take your batteries out, wait a minute and put them back. See if resetting helps. Not being familiar with your camera, speciffically, Ithis sounds like the firmware in the camera is reading the info back to you backwards when it processes the image (from memory) for you to view. That means it is the firmware in the camera that is defective and sometimes you can update or reinstall that. I would check the manufacturer's site for updates or recalls and if it is under warranty, send it back to be fixed.