Question about Kenmore Elite HE4 Electric Dryer

1 Answer

DYRER PROBLEMS MY DRYER STARTED BEEPING AT ME THE OTHER DAY AND IT WAS THE HIGH/LOW/OFF BUZZER FOR THE END OF CYCLE. THIE BEEPING WAS THE LIGHT CYCLING BETWEEN THE HIGH TO LOW TO OFF AND SO ON RIGHT BACK THRU AGAIN. THEN ONCE YOU OPEN THE DOOR THE LIGHT WILL COME ON BUT IF YOU SHUT THE DOOR YOU DON'T HAVE ANY POWER TO THE CONTROL PANEL TO START THE DRYER. I HAVE CHECKED POWER AND GETTING FULL 220/240 VOLTS. IF YOU LET IT SET FOR AWHILE THE DRYER WILL EVENTUALLY LET YOU START IT UP. APPROXIMATELY 5-10 MIN INTO THE DRYING CYCLE IT STARTS UP AGAIN, BEEPING AND CYCLING THRU THE END OF CYCLE ALARM. WHAT'S GOING ON WITH THIS THING?

Posted by on

  • benagee Dec 01, 2008

    My HE4 just started doing the same thing. Unplugging and waiting 15 minutes works, but it eventually starts back up again.

  • uscgduncan Mar 27, 2009

    And the display show 36 minutes. it just freaks out on it own. I have checked and cleaned all of the board connetions and unplugged in numerous times as well as left it unplugged for 30 minutes or so. Its almost 6 years old and I have never ever had a problem with it.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I took the top off checked all the wiring, cleaned the back vents, and the vent tube going outside. I also cleaned the lint screen and gaurd really good, put it all back together. I also unplugged the dryer waited a few minutes and plugged back in. The dryer had a code flashing saying it lost power, I reset the dryer and it has been working great now. Evedently it must be sensitive.

Posted on Aug 19, 2008

  • pirate_jim16
    pirate_jim16 Jan 18, 2013

    how do you reset the dryer?

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The buzzer does not sound at the end of a drying cycle. I've replaced the buzzer but the problem of no buzzing still remains. How is this remedied?


About 21,300 results (0.60 seconds) Search Results

    Dryer Buzzer Replacement - Whirlpool/Kenmore Electric ...

    ? 1:11
    https://www.youtube.com/watch?v=vsLyHfJLfqk
    Jul 15, 2010 - Uploaded by RepairClinic.com
    Dryer Buzzer Replacement - Whirlpool/Kenmore Electric DryerRepair ... Additional dryer repair, troubleshooting tips, help with finding your ...

    Questions and Answers for Whirlpool 694419 Adjustable ...

    www.appliancepartspros.com/questions-for-whirlpool-adjustable-buzzer-...
    Customer Questions and Answers for Adjustable Buzzer Kit by Whirlpool ... At theend of the dryer cycle the buzzer sounds but does not time out and shut off.

    Whirlpool 694419 Adjustable Buzzer Kit ...

    www.appliancepartspros.com > ... > Washer > Whirlpool Washer Parts

    $27.64
    Adjustable buzzer kit 694419 / AP3019850 made by Whirlpool. ... At the end of thedryer cycle the buzzer sounds but does not time out and shut off.

    Whirlpool® Duet® 7.3 cu. ft. Front Load Electric Dryer with ...

    www.whirlpool.com/-.../WED80HEBW/

    Whirlpool Home Appliances

Feb 08, 2016 | Whirlpool Dryers

1 Answer

End of cycle keeps beeping even after clothes are finished and removed


this could range from a simple processor hanging problem to a defective pcb

please start from a hard reset by leaving the unit plugged off from wall power for one night

Jul 30, 2008 | Frigidaire GLEQ2152ES Electric Dryer

1 Answer

Why won't the buzzer alarm go off at the end of a drying cycle


Search Results

    Why does my Kenmore dryer model 417.94802/94862 end ...

    www.shopyourway.com > Manage My Life > Questions
    Why does my Kenmore dryer model 417.94802/94862 end of cycle alarm go off ...washer/dryer unit I do see that it is normal for the end of cycle buzzer to go off ...Why won't my Kenmore dryer model 110.86872100 shut off at the end of the ...

    Why won't the buzzer shut off on my Kenmore 80 Series ...

    www.shopyourway.com > Manage My Life > Questions
    The buzzer won't stop buzzing after the load is complete. ... or turn on the timer and the dryer will start just by selecting a cycle and closing the door. ... The dryer should continue to run and at the end the buzzer should only stay on as long as ...

    FIXED The Buzzer At The End Of The Dryer Cycle Comes On But Won't ...

    www.applianceblog.com/.../21739-The-Buzzer-At-The-End-Of-The-Dry...

    Dec 11, 2010 - 10 posts - ‎2 authors
    My maytag dryer has operated wonderfully until today. All of a sudden the buzzer that goes on at the end of the drying will go on but will not shut off unless I open the door.... To test it: by-pass the push-to-start switch and see if when you turn the timer on and close the door, the ... VERY annoying dryer End of Cycle Signal
    9 posts
    Jun 29, 2012
    Maytag DE8410 electric dryer - End of cycle buzzer stuck ...
    4 posts
    Mar 27, 2011
    Kenmore 80 series, buzzer won't shut off
    2 posts
    Sep 10, 2005
    More results from www.applianceblog.com

Feb 08, 2016 | Whirlpool Dryers

2 Answers

410e buzzer keeps buzzing after switch is off


sears kenmore dryer when dry cycle is done buzzer keeps ...

www.shopyourway.com > Manage My Life > Questions
It can be very annoying when the buzzer to your dryer will not shut off after the ... push to start switch as soon as I close door also buzzer keeps buzzing at end of ...

My dryer end-of-cycle buzzer will only stop buzzing when I ...

www.shopyourway.com > Manage My Life > Questions
I see your dryer buzzer will only go off if the door is open. ... Dryer #11079622800: End of cycle buzzer won't stop buzzing after cycle is complete. ... sears kenmore dryerwhen dry cycle is done buzzer keeps buzzing. will not turn off unless you ...

Why won't the buzzer shut off on my Kenmore 80 Series ...

www.shopyourway.com > Manage My Life > Questions
The buzzer won't stop buzzing after the load is complete. ... The buzzer won't stopbuzzing unless you open the door or turn on the timer and the dryer will start ...

Keep Your Dryer Quiet - Instructables


Dec 14, 2015 | Dryers

1 Answer

How do I prevent the beeper from beeping when the dryer cycle is finished? I did not press the beeper button but I can't seem to program it so it does not beep. Please help. Thank you. My dryer is a T...


In your manual it says if the indicator light is on then the buzzer is on so to turn off the buzzer at the end of your program you would press the button again. Heres is that section from your manual

5. Select the buzzer (if desired)

^ Press the "Buzzer" button to have a

tone beep at the end of the program.

Indicator light:

on = buzzer selected

off = buzzer not selected

To adjust the buzzer volume:

- turn the dryer on

- close the door

- select a program

- if the indicator is lit, press the

"Buzzer" button so the indicator light

goes out.

^ Press and hold the "Buzzer" button

until its indicator is lit and you hear
the desired volume and tone.
also if you need the manual for your machine your can get it directly from this link click here
http://www.retrevo.com/d/ds/progress?doc=508a0566a4fcfb2910e707b71d1fb918&u=1&rk=0.2030122370322724

if you have any further questions message me back and please also remember when our chat has fully concluded to rank how this opinion has helped in your appliance situation Thanks again I await if you have any further reply
Rick

Jun 26, 2011 | Miele T8003 Dryer

1 Answer

The beep that signals load is done sounds prematurely for about a minute ,the dryer continues until load is dry then shuts off


On this dryer each of the seven automatic cycles listed on your machine perform different functions based on fabrics, load size or variables. In essence the first four settings (Heavy Duty to Delicate) relate to your desired drying temperatures of high, medium, low or extra-low respectively. The moisture level of the load is determined by the dryer's sensor system and the machine will set the drying time to an optimal level.

Whirlpool added a WRINKLE FREE feature or what one might describe as an extended intermittent tumbling time. This added cycle helps reduce wrinkling when you may not be able to unload the dryer immediately after the end of the cycle when the buzzer goes off. Starting this setting is a simple one button operation at the control panel. TheWrinkle Shield™ Plus Feature is preset to on during the permanent press cycle.


Jan 30, 2011 | Whirlpool Cabrio 7.0 Cu. Ft. Super...

2 Answers

Kenmore Elite Smartheat Quiet Pak 9 won't start. Light turns on and off inside drum when door opens/closes, but no lights come on on the outside display.


My Kenmore Elite dryer keeps beeping..just going through the end of cycle alarm-high,low,off...anyone have any suggestions?

May 30, 2010 | Kenmore Elite HE4 Electric Dryer

1 Answer

Dryer end of cycle buzzer


disconnect the BUZZER wire from the Timer

Sep 16, 2008 | Crosley CDG6000 Gas Dryer

2 Answers

Kenmore Series 70 Dryer Buzzer won't stop buzzing - Model 110.96573220


  • the buzzer is located under the control panel. 
  • you can unplug it.
  • unplug the dryer or turn the breaker off first
  • then take out the 2 screws on both sides of the control panel
  • bull it forward toward you and unhook it from the case
  • you should see the buzzer with two wires going to it
  • only need to disconnect one.
  •  just make sure you wrap the bare wire connector with electrical tape to keep it from touching metal.

Jun 28, 2008 | Kenmore 60172 Electric Commercial Dryer

Not finding what you are looking for?
Kenmore Elite HE4 Electric Dryer Logo

178 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Tim Whalen

Level 3 Expert

3056 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Are you a Kenmore Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...