Question about Mintek DTV-263 26 in. TV/DVD Combo

1 Answer

No system control

Remote only turns tv on or off. nothing else and f I put dvd in it plays but cant take dvd out now.

Posted by on

  • 2 more comments 
  • Anonymous Nov 07, 2008

    No control of the T.V. with the system buttons on the side of the set or with the remote. Only the on - off button works.

  • Anonymous Nov 07, 2008

    No control of the set from the systems buttons on the side of the set or with the remote. The only buton that works is the on - off button, and when you push the off button the screen goes blank, the green LED stays on for approx. 20 seconds then the red LED comes on.

  • tomnines2 Dec 23, 2008

    same thing willturn on and off but and play dvd but wiii not eject and can'tget back to tv, will only turn on and off

  • Anonymous Dec 30, 2008

    This is a dumb machine and has been since day one. Had problems first week and customer service was hopeless. Now it is on-off only and only works in DVD mode. It is over a year old and hits the trash barrel tomorrow.
    gene M.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

According to Mintek customer service they know about this design problem. If the TV is still under warranty you'll need to call them for an RMA and ship the TV to them [at your cost even though it's their bad design] for a replacement. They didn't impress me with their service and it took me a few months to get everything squared away. Because of all the problems I had with them I will not recommend their products to anyone.

Posted on Dec 08, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have Dick Smith LCD TV DVD?TV combination. Model number GE6607. The remote control has stopped working. When you change functions you must press the OK button to get the DVD to play. Given that the DVD...


Check the remote control for its infra-red emission. Check it with fresh batteries. Check by pressing all the buttons on it; and see whether all of it generates infrared signal while pressing. If it is found OK, check and replace the infrared sensor inside the TV. If you wish to get some details; check the site linked here. It has details about how to check a remote control; by one among the post. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/ If the remote control is found OK; check and replace the infra-red sensor inside the TV. Contact any service technician.

Nov 03, 2014 | Televison & Video

1 Answer

Installing a dvd. how do i swithch the signal from tv to dvd


THE COMBO WHEN YOU HIT PLAY SHOULD BE AUTOMATIC AND DISPLAY PICTURE AND SOUND ON THE SCREEN---THIS IS LISTED AS A TV-VCR COMBO SO IF dvd hooked to one of the rear inputs (some are also on front on some models) in the menu you select that input and should see the picture and hear the sound from the DVD.

Mar 19, 2012 | Sylvania SRC22134 13 in. TV/VCR Combo

1 Answer

Apex DVD/Tv combo GT2015DV won't play dvd's


Something is wrong..crbr799 your DVD-TV has a TV-DVD button on the right front to switch from TV to DVD play...OPEN button on left side ,place DVD in tray, close & press PLAY...
I something simulator that needs the remote control for the SPECIAL functions....by the way the ORIGINAL r\c is $135 to $155, a replacement ($35) will turn the TV\DVD on ( which you can do without the r\c) and NOT function with anything else.
P.S. they will try to sell you universal r\c that work with the CABLE boxes, the ones that you pay a monthly fee!!

Aug 11, 2011 | Apex Digital Televison & Video

1 Answer

My remote control for my rca combo 20f510td is not ejecting my dvd from the t.v. .... also actually none of the dvd buttons are doing much of anything when I press them, i.e. the play, pause, eject,...


For remote control concerns. You can try to reset your remote control but be shure before you reset your remote your tv should be unplugged from the power outlet. So here are the 4 steps to reset your remote:
1. remove the batteries,
2. press and hold the number 1 button of the remote control, thus draining all the remaining electricity.
3. put the batteries back in.
4. plug the tv on the power outlet then turn the tv on and try the remote control.
Now if these steps do not work check the warranty of the tv and have your remote be replaced if it's under warranty and if not you can try to purchase a universal remote control that supports RCA tv's.

Sep 09, 2010 | RCA 20F510TD 20 in. TV/DVD Combo

1 Answer

REMOTE CONTROL DOES NOT OPERATE DVD


I am having the exact same problem, however I have the official remote that goes with the TV. Have you found a solution to this yet? perhaps its a problem with the TV rather than the remote?

Mar 11, 2010 | Televison & Video

1 Answer

Need remote control code for Panasonic PV-DF2703


I found a newer Comcast PDF file that shows a 5 digit number for tv with vcr ( no mention of DVD) but the code worked to turn on the tv and cable box together. My problem is it won't work the volume, yet
https://www.comcast.com/MediaLibrary/1/1/Customers/Customer_Support/Digital_Cable_with_OD/Digital_Cable/remotes/Remote_M1067BX3.pdf

Dec 24, 2008 | Panasonic PV-DF2703 Triple Play 27 in....

1 Answer

I need the region dvd code for my panasonic triple play tv


1. Press the Menu button on your remote control 2. Press the 5 button on your remote control 
3. Press the 7 button on your remote control 
4. Press the 5 button on your remote control 
5. Press the 3 button on your remote control 
6. Press the 8 button on your remote control 
7. The currently selected region will be indicated on the TV. 
8. Press the 1 button on your remote control for region 1, the 2 button for region 2, and so on, or the 9 button for multi-region playback 
9. Press the Menu button on your remote control 
10. Press the Menu button on your remote control 

Tested with Region 1 DVD's on my UK player (Region 2 bought from Comet)

Nov 11, 2008 | Panasonic PV-DM2792 Triple Play 27 in....

1 Answer

How do i store channels on Bush TV/DVD


like yourselfs could not tune in t v chanels very frustrating only solution i bought a digi box pluged it all in fantastic picture well worth the £17 pound that it cost maggie

Jun 13, 2008 | Bush DVD142RC 14 in. TV/DVD Combo

1 Answer

Locked dvd


1. Press the Menu button on your remote control 2. Press the 5 button on your remote control 
3. Press the 7 button on your remote control 
4. Press the 5 button on your remote control 
5. Press the 3 button on your remote control 
6. Press the 8 button on your remote control 
7. The currently selected region will be indicated on the TV. 
8. Press the 1 button on your remote control for region 1, the 2 button for region 2, and so on, or the 9 button for multi-region playback 
9. Press the Menu button on your remote control 
10. Press the Menu button on your remote control 

Tested with Region 1 DVD's on my UK player (Region 2 bought from Comet)

Mar 02, 2008 | Panasonic PV-DF2703 Triple Play 27 in....

3 Answers

Tv/dvd combo only plays dvd's in black and white


Finally figured this out. On your remote push tv menu until you get to function. You should automatically be under col.sys. change this to NTSC. Took me awhile to get remote to work here, ended up pushing in the middle of the red vol +,- bar on the right of the remote. Couldn't find the right button according to the directions on the screen. DVD is now in color!! If you are not already on the option to change col.sys, use the red channel up down bar on the left of the remote.

Feb 22, 2007 | Jwin JD-TV1300 13 in. TV/DVD Combo

Not finding what you are looking for?
Mintek DTV-263 26 in. TV/DVD Combo Logo

Related Topics:

265 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mintek Televison & Video Experts

Brad Brown

Level 3 Expert

13732 Answers

The Knight
The Knight

Level 3 Expert

69610 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6355 Answers

Are you a Mintek Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...