Question about Uniden 5.8GHz Dual Cordless Phone

1 Answer

Resetting phones and restoring to full factory default.

Don't know how to give a soft reset to both phones or to restore to full factory default. I do not have the manual which came with the phones.

thanks


The phone has caller ID menu button, and a redial/pause,select channel,delete/transfer and memory buttons.

Posted by on

  • 4 more comments 
  • omcjwc Aug 19, 2008

    I should have gone to the Uniden factory rep to start with. I was told by the Uniden factory rep that the phones can't be fixed ....will need to get replacements.

  • dlechem Aug 24, 2008

    I have a Uniden 7805 phone that I need to reset. Saw on the internet to removethe battery and then press and hold the '*' and '#' buttons while replacing the battery, and then pressing the RH soft key. Did this got the place on base message - but stil will not register!



    In a male moment decided to do the same thing to one of the other phones that was working - so now have 2 phones that do not talk to the base unit!

  • Anonymous Aug 28, 2008

    I can call out on phone but cannot recieved any phone calls.

  • Anonymous Sep 04, 2008

    I have no power on phone it will not power and I have had it for less than two years it was purchased from Conns appliance is that where I should return it to.

  • Anonymous Sep 30, 2008

    I have a phone that will not deregister. It keeps saying that it cannot
    connect to the base. I am trying to reregister because two phones have
    the same phone ID. I tried resetting, but there must be DRAM, since leaving battery out for a couple of days did not erase info

  • wargobs1 Nov 01, 2008

    When my phone rings,it only rings 3 times. Can I extend the rings

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,800 Answers

Okay i will fix the prob but i need model name
and fix ya rate after giving the solution okay??

Posted on Aug 19, 2008

  • Jalal Sordo
    Jalal Sordo Aug 19, 2008

    okay its up to u

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need to reset handset


IP Reset
IP Reset returns the basic network settings to their factory defaults. You can perform this operation from the
base unit or one of the handsets.
The following settings will be reset to their factory defaults:
DHCP setting (restored to DHCP on
• Settings related to static IP addressing (the values for static IP address, subnet mask, default gateway,
DNS1, and DNS2 are cleared)
• DNS settings for DHCP connection cleared


1.2 Reset and Firmware Update
1.2.1 Reset
1.2.1.1 Resetting the Network Settings IP Reset
Performing IP Reset from the phone user interface see 2.1.4 IP Reset restores the basic network settings
made through phone user interface programming or Web user interface programming to their factory defaults.
If the unit is unable to connect to the network after changing network settings, you can restore the network
settings to their factory defaults by performing IP Reset, and then try configuring the settings again. Settings
such as the phonebook data, are not cleared by this feature.
The following settings will be reset to their factory defaults:
• DHCP setting restored to DHCP on
• Settings related to static IP addressing (the values for static IP address, subnet mask, default gateway,
DNS1, and DNS2 are cleared)
• DNS settings for DHCP connection (cleared)
• PHY settings (speed and duplex mode of the either LAN or PC port are restored to "automatic")
• VLAN (Virtual Local Area Network) settings (disabled)
• Terminal number settings (restored to "automatic")
Notice

After performing IP Reset, the unit will restart automatically. To avoid problems, it is recommended that
you save your settings before performing IP Reset.
Note

If these settings (with the exception of PHY settings and terminal number settings) were made through
Web user interface programming, the set values made through Web user interface programming
remain effective, even if you perform IP Reset. To reset these settings to their factory defaults, perform
Reset Web Settings from the Web user interface again.
Document Version
2010-08
Administrator Guide
www.InternetVoipPhone.co.uk ' sales@internetvoipphone.co.uk ' 0800 088 4846
Firmware Update

If these settings (with the exception of PHY settings and terminal number settings) were made through
configuration file programming, the set values made through configuration file programming remain
effective, even if you perform Reset Web Settings.
Resetting the Settings Made through the Web User Interface
(Reset Web Settings)
Performing Reset Web Settings from the Web user interface see Reset to Defaults) resets the
settings made through the Web user interface to their default values.
When you use this feature, the unit will return to the status just after performing the most recent provisioning
or pre-provisioning.
Notice

After performing Reset Web Settings, the base unit will restart automatically. To avoid problems, it is
recommended that you save your settings before performing Reset Web Settings.
Note

The settings configured through the phone user interface only will not be reset. However, settings that
can be configured through both the phone user interface and Web user interface will be reset.
1.2.2 Firmware Update
You can update the unit's firmware to improve the unit's operation. You can configure the unit so that it
automatically downloads the new firmware file from a specified location. The firmware update will be executed
when the unit is restarted.
For details, see Section 6 Firmware Update.
Provisioning server
Firmware server
Configuration
file
A
Firmware
C
B
A Download
B Check for update
C Firmware download and update
34
Administrator Guide
Docume

Jan 16, 2013 | Panasonic KXTPA50 Phone

2 Answers

Nokia5130c ,my phone is showing that its phone memory is used 3.1mb,but my phone show that its memory full.


estore default setting using security code 12345 and restart device ant try again

May 19, 2012 | Nokia Lands Phones

1 Answer

How can i format my nokia phone 6300


Hi there!
Here are the steps on how to restore the factory settings on your nokia phone 6300:
Before you start reformatting your phone kindly backup all the stored data on your phone because doing a hard reset will delete all the files stored on your phone. The first thing that you have to do is to remove your memory card on your cellphone.Then after that please tap *#7370# on the phone. When prompted by the phone to "Restore all original settings"confirm Yes" by pressing on the left-soft key. You may have to enter the security code of the phone before the restore process begins. The default code is 12345. And then after that press "OK" after entering the security code for the restore process to begin. The phone will restart to begin the formatting process.

Thanks!

Apr 17, 2011 | Nokia Lands Phones

1 Answer

How to restored the phone of the model no 5310 (nokia)


Please follow following steps:

Steps to Restore Settings

This resets all preference settings without deleting any personal data.


  1. Select Menu > Settings > Restore factory settings.
  2. Select Restore Settings only. If prompted for code, the default code is 12345.


Steps to Restore Phone

This resets all preference settings and deletes all personal data such as contacts,messages,media files and activation keys.



  1. Select Menu > Settings > Restore factory settings.
  2. Select Restore all. If prompted for code, the default code is 12345.

Mar 10, 2011 | Nokia Lands Phones

1 Answer

I need to reset a nokia 2126 tracphone to factory settings someone had locked it and dont know the code


To restore factory settings

This option resets some of the menu settings to their original values. It does not
delete data that you have entered or downloaded, or affect entries in your
contacts list.

In the standby mode, select Menu > Settings > Restore factory settings. Enter the
security code, and select OK. See "Change lock code," The default code is 12345.

Mar 05, 2011 | Lands Phones

1 Answer

Repormat


There are several levels of formatting. You never need to remove your sim or memory cards because these are not touched during the reset procedures.

Reset to factory defaults (*#7780#) : Restores settings but preserves user data (photos, 3rd party apps etc). This works in the same way as selecting it from the phones settings menu.

Full Reset (*#7370#) : This reformats completely the C: drive. All applications and files stored on this drive will be lost and clean default files will be rewritten.

The hard reset is more aggressive and has been know to solve some hardware issues such as non-functioning bluetooth. It's also the only method that may work if the phone cannot boot up.

Hard reset:

1. Switch off the phone.

2. Hold down the following three buttons: Green (the call answer button), * button, and '3' button.

3. While holding these buttons, hold the power button for a second to switch on the phone.

4. Release when the phone shows the nokia hands logo or shows other signs of life like the language selection screen.

Jan 31, 2011 | Nokia Lands Phones

1 Answer

My n70 nokia phone's device is locked I forgot my device luck code. kindly tell me how can I unluck it ?


You can do a soft reset to restore all the phone’s settings to factory default by entering this code:
*#7370#
OR you can do a hard reset :
-Switch off the phone.
-Press CALL + * + 3 + ON simultaneously until the phone is completely started.
-The default password is 12345. You need to press and hold the key until the number appear.

I hope that helps!
www.usedcellphoneshop.com

May 18, 2010 | Lands Phones

1 Answer

Forgot my pass code to my iphone 8gb


Hello and Welcome to FixYa!
If you have forgotten your iPhone's passcode you can reset it by restoring your phone to factory default settings. You can restore your phone by following this tutorial (or this one).
Please remember by restoring your iPhone your iPhone will be formatted so all your data will be lost. So make sure to create a backup of your data before you restore.
Please comment here if you are having any difuculty.
Please rate me if i was helpful,
Regards, Waqar.

Nov 03, 2009 | Lands Phones

1 Answer

Can't reset to factory default


if you are using a mobile phone, you can brows to the settings of the mobile and then you will find an option that say "Restore factory default", click on it and then your phone your perform the reset.

Oct 30, 2009 | Lands Phones

1 Answer

Handset Fails to Register


It is quite possible that you'll need to go into the menu settings on your base-unit and reset the unit or restore factory default, whichever option it gives you. Also, look in the menu on the phone to see if there is an option to reset the handset also. After resetting the unit and/or handsets, try to register the handsets again, one at a time. If that still does not fix the problem, you may have handsets that are not compatible with your system, or your system may not be able to support that many phones. However, if you have the right handsets, and your system can host that many handsets, then I'm confident that resetting the unit and re-registering your handsets should fix your problem.
Hope this helps! Have a nice day!

Apr 05, 2008 | Uniden DCX640 Cordless Expansion Handset...

Not finding what you are looking for?
Uniden 5.8GHz Dual Cordless Phone Logo

626 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Lands Phones Experts

kakima

Level 3 Expert

98816 Answers

Dave Ellis

Level 2 Expert

84 Answers

k24674

Level 3 Expert

7993 Answers

Are you an Uniden Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...