Question about Computers & Internet

Open Question

D:\ is not accessible incorrect function

Every time I try to use my D:\ drive I get this error message D:\ is not accessible incorrect function, the drivers are up to date and was running fine not even 2 hours ago. what is wrong?I have a TSST Corp DVD+-RW TS-H653B

Posted by on

  • 1 more comment 
  • leaderofthe_ Nov 17, 2008

    win xp

    same problem with my external lite on ez dub dvd wr drive

    says incorrect function when attempting to open a data disc

    i can play cds dvds but cant burn anything also the buttons on the top airnt working they do on another comp though



    kevin

  • Anonymous Mar 27, 2009

    same problem with me. Was working fine but now not.

    im using windows vista and a sweetex card reader.

  • Anonymous Apr 12, 2009

    same.

×

4 Suggested Answers

  • 1 Answer

SOURCE: TSST corp CDDVDW TS-L633a Windows cannot start

ASUS Nootebook M/n.F80cr.
CD/DVD Driver : 4M-TSSTcorp CDDVDW TS-L633A.
Bios V.204.
WindowsXP.Pro.pack3
My Computer not to Look on windows.
I neet driver softwere to solve this problem.

Posted on Jul 11, 2010

  • 2 Answers

SOURCE: Code 39. Windows cannot download device. Driver

Go to http://pcsupport.about.com/od/driverssupport/ht/upperfilters-lowerfilters.htm for the solution. I had a similar problem (Code 39) with my optical drives and Windows 7 64-bit. This solution corrected it.

Posted on Aug 10, 2010

ghost2233
  • 3606 Answers

SOURCE: My TSST corp DVD+-RW TS-L532B combo drive will no

Upgrade the software from here:

Select CD/DVD

http://support.dell.com/support/downloads/driverslist.aspx?c=us&cs=04&l=en&s=bsd&os=WW1&osl=en&SystemID=INS_PNT_6000&catid=-1&impid=-1

Its maybe the firmware there is outdated.

Good luck.

Posted on Mar 06, 2011

bronk50
  • 27725 Answers

SOURCE: My TSST.corp TS-H653Z has stopped working the


make sure that the dvd rom is getting enough power test all leads that are attached to the dvd including electrical extensions and make sure they have a secure connection or just replace them there might be bad/faulty or
your drivers may have been corrupted or you might have a virus run your antivrus program
you might have to physically unplug the leads for this cd/dvd rw then plug them back in or
you might have to uninstall then reinstall your DVD/CD or uninstall the driver then reinstall for this device
click start control panel administrive tools,computer management device manager scroll down cd dvd rom drives if you see a yellow question mark? right click you will have options to update driver,roll back driver,or
select properties general troubleshoot, select driver click to reinstall drivers click update driver or uninstall then reinstall
Click start control panel administrive tools,computer management,device manager scroll down cd-dvd rom drives you might see a yellow question mark ? right click you will have options to update driver,roll back driver,or select properties general troubleshoot, select driver click to reinstall drivers click update driver or uninstall then reinstall if this does not fix the problem it might be a registry problem if you cant see your disk drive in windows explorer
Close all open programs

Click on Start, Run, and type regedit and press Enter
Click on the plus signs (+) next to the following folders

HKEY_LOCAL_MACHINE

SYSTEM

CurrentControlSet

Control

Class

{4D36E965-E325-11CE-BFC1-08002BE10318}

This folder is the DVD/CD-ROM Drive Class Description in the registry. Look for any of the following names in the right hand column.

Upper Filters

Lower Filters

Upper Filters.bak

Lower Filters.bak

If any of the above keys shown in step 4 are listed, right-click on them and choose Delete

After deleting the keys, close the registry editor
Reboot your computer

Open My Computer and check to see if your CD or DVD drives have returned. You may also want to open Device Manager and verify that the yellow exclamation and error code on the CD or DVD drive is gone. Hope this helps

Posted on Apr 12, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Net flix is not working. What can I do?


Pretty general question, but I'll try to help.

Check that your username and password are correct.

Make sure your payments are up to date.

Make sure your version of Silverlight is up to date.http://www.microsoft.com/silverlight/

Make sure there's just one Netflix window or tab open.

Make sure you don't excede the number of simultaneous users aavailable for your contract.

Hope it helps.

Sep 23, 2014 | Samsung Computers & Internet

1 Answer

Notebook DVD is not working


You need to take the drive out and put it back in. Try doing a BIOS update if one is available or simply reinstall the Operating System. If this does not work either then you will have to replace the DVD drive.

May 04, 2010 | Computers & Internet

1 Answer

Error dvd drive inaccessible incorrect function


Try changing the drive letters through right clicking my computer, clicking manage, then drive management on the right, then right clicking on the drive, and clicking change drive letter.

Dec 29, 2009 | Teac (DV28E) Internal DVD Drive

1 Answer

Cd player will not read disks. Device manager on Vista gives a code 19 error, but says the drive is up to date


Even though the driver indicates "up to date" it will not hurt to reload the driver. Do this and let me know what happens.

Dec 02, 2009 | Sony NEC Optiarc AD-7200A IDE Internal DVD...

1 Answer

What is code 19 configuration damage


That message usually means that the registry may be corrupted.

If you have Media Player version 7, uninstall and install version 11 and see if you have DVD access, again.

If you are experiencing other system problems, I would strongly suggest that you roll back your system via System Restore. Select a date prior to the date you began to experience problems. Just be aware that your data will roll back to an earlier date as well.

Hope this helps.

Aug 22, 2009 | Dell Computers & Internet

1 Answer

Code 37 on dvd drive


The Code 37 error may occur when the concerned device is not connected to the system correctly and when its driver is faulty. A code 10 error is common when you add or remove USB devices or video & sound cards to and from your PC. When these errors occur, you may receive the error message given below.
Windows cannot initialize the device driver for this hardware. (Code 37)
To resolve code 37 errors, first ensure that your device is properly connected to your system. For instance, check all the cables of your printer or check that your sound or video adaptor is properly seated in its slot.
Try to remove and reinstall the device, and run the Add New Hardware Wizard from the Control Panel to see if Windows detects and installs it. If this does not resolve the issue, then update the device driver by performing the following steps:
1. Open Control Panel and select System.
2. In the System Properties dialog box, select Hardware tab, and then click on the Device Manager tab.
3. Scroll down the Device Manager window and identify the faulty hardware from the list.
4. Right-click on the hardware and select Update Driver.
5. Follow the screen instructions to resolve the error.
If these steps do not resolve your error, then the problem might be with your device. Get it checked by an authorized technician.

Aug 04, 2009 | Dell DVD-rom DVD Drive

1 Answer

Error window ''G:is not accessable incorrect function'' I get this whenever I try to access the drive. I have a dell 8300 using XP pro 32 the drive is a liteon shm-165h6s


have you check the connection?check its cable, first.i do had the same problem.i tried to use another cable and it works.if not, try your drive in a different cpu to make sure that your dvd drive is functioning properly.

May 14, 2009 | Computers & Internet

1 Answer

MATSHITA DVD-RAM UJ-820S ? I cannot get access to drive no more!!


Try to update Firmware if newer version is available. Try to reconnect it. I had a problem with my MATSHITA DVD-RAM on Toshiba Satellite A30 and it helped me.

Apr 17, 2009 | Computers & Internet

1 Answer

It will not work


try to disconnect the power and data cable from the mother board and try to reconnect them again and also check if they are present in the bios setup

thankyou

Oct 23, 2008 | ASUS DVD-E616P DVD Drive

2 Answers

Cd rom and dvd drives were not visible.


Hi purushoth,

So neither of the ROM drives are available, or just the one? Your jumper settings may or may not be correct; in some systems, even having the IDE cable placement and jumper settings correct may still leave errors such as this.

Basically if you dink around with the settings (for example just try changing the Slave and Master) it will work (provided there's nothing wrong with the drives or IDE cable). I'd also suggest setting both to Cable Select as some systems (such as Sony VAIOs) oftentimes will only allow optical drives to function with that setting.

Ben

Feb 25, 2008 | HP (344542-005) DVD Drive

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

555 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

98796 Answers

David Payne
David Payne

Level 3 Expert

14071 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...