Question about Copystar CS-1815 Printer

1 Answer

Copystar cs1815 c6000 code

C6000 code

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 126 Answers

This is a fuser problem -- here is a reset method:


First open top cover then turn on power.
press system menu/counter
arrow down to service
press and hold start, # then enter keys
arrow down to maintenance
press enter
arrow down to Sim 163
press enter
select execute
press enter
turn off power then back on

Posted on Jan 16, 2009

2 Suggested Answers

shawn38
  • 200 Answers

SOURCE: error code c6000 of copystar cs1815

SIM 163 Reset (only do this one SIM, by doing others you could cause your machine to no longer function. Also see note at bottom.


Entering Simulation Mode

1. Press the system menu/counter key.


2. Select Service setting using the up/down cursor keys.


3. While pressing the start key and the # key, press the enter key. (Maintenance mode is entered.)


4. Select Maintenance mode using the up/down cursor keys.


5. Press the enter key.Enter the maintenance item (163 Resetting fuser problem) number using the up/down keys.

6. Go to step 1 under method below.

Resetting the fusing problem data Description

Resets the detection of a service call code indicating a problem in the fusing section.

When a service call concerning the fusing section occurs, turn the power switch off and open the front cover.

Then, turn the power switch on and press the system menu/counter key to enter the maintenance mode.

Purpose

To prevent accidents due to an abnormally high fusing temperature.


Method

1. Press the enter key. A selection item appears.

2. Select Execute using the up/down cursor keys.

3. Press the enter key. The fusing problem data is initialized. (Four service calls, namely C6000, C6020,C6050, and C6400 are reset.)

Completion

Press the back key. The indication for selecting a maintenance item No. appears.


Note:Sometimes in order to do the reset when the machine is in an error state you need to open the top cover (like to replace the toner) and leave it open until you have performed the reset.

Posted on Mar 25, 2011

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My kyocera taskalfa 180 asking me to call service C6000. How can fix this error?


It is fuser error try resetting it by running mode 163, otherwise replace the fuser unit.

Feb 26, 2016 | Copystar Kyocera Taskalfa 181 Copier

1 Answer

Kyocera c6000 error


Fuser error try to reset it otherwise if it didnot work, change fuser unit

Nov 26, 2013 | Copystar Kyocera Taskalfa 181 Copier

1 Answer

Error code c6000 of copystar cs1815


SIM 163 Reset (only do this one SIM, by doing others you could cause your machine to no longer function. Also see note at bottom.


Entering Simulation Mode

1. Press the system menu/counter key.


2. Select Service setting using the up/down cursor keys.


3. While pressing the start key and the # key, press the enter key. (Maintenance mode is entered.)


4. Select Maintenance mode using the up/down cursor keys.


5. Press the enter key.Enter the maintenance item (163 Resetting fuser problem) number using the up/down keys.

6. Go to step 1 under method below.

Resetting the fusing problem data Description

Resets the detection of a service call code indicating a problem in the fusing section.

When a service call concerning the fusing section occurs, turn the power switch off and open the front cover.

Then, turn the power switch on and press the system menu/counter key to enter the maintenance mode.

Purpose

To prevent accidents due to an abnormally high fusing temperature.


Method

1. Press the enter key. A selection item appears.

2. Select Execute using the up/down cursor keys.

3. Press the enter key. The fusing problem data is initialized. (Four service calls, namely C6000, C6020,C6050, and C6400 are reset.)

Completion

Press the back key. The indication for selecting a maintenance item No. appears.


Note:Sometimes in order to do the reset when the machine is in an error state you need to open the top cover (like to replace the toner) and leave it open until you have performed the reset.

Mar 20, 2011 | Kyocera COPYSTAR CS-2050 Printer

2 Answers

Driver needed for kyocera cs1815


Try this location:

http://www.driverstart.com/start318276.html

Jul 11, 2010 | Kyocera Copystar CS-1820 Black and White...

1 Answer

I have a copystar c2520 and am getting a c6000 error which was cleared with 10871087 and then 163 but now im getting a c6030 code and it will not clear. could this be that the fuser is no good?


C6000, С6030 is Abnormally high temperature in the fixing section – The fixing unit thermistor output voltage remains less than 0.5 V for longer than 1 s, indicating the fixing temperature rises above 536F this may be the fuser is no good. Sorry? coll to Servise center Mita. Dood lack!

Sep 22, 2009 | Copystar Office Equipment & Supplies

1 Answer

Hello


C6000 is the code for a heat unit error. Either a lamp is defective, or a thermal fuse blown or maybe a thermistor (heat sensing device) is dirty or bad.

Jun 24, 2009 | Kyocera Copystar CS-1635 Copier

1 Answer

C6000 error code


Hi

Error C6000 is displayed when your machine fails to reach the correct temparature at a specific time.

This is a Fuser Unit Problem, try to reset it by--

First open top cover then turn on power.
press system menu/counter
arrow down to service
press and hold start, # then enter keys
arrow down to maintenance
press enter
arrow down to Sim 163
press enter
select execute
press enter
turn off power then back on

If the reset doesn't work then get your unit checked for fuser unit and fuser unit heat issues.

Please do rate this solution as FixYa and revert for further assistance.

Thanks
Rylee

May 09, 2009 | Kyocera Copystar CS-1820 Black and White...

1 Answer

KYOCERA copystar CS-1820 ERROR C6000


Your problem is heat related, or the lack of heating at least. one of 2 things went wrong here... either the fuser unit overheated causing the thermal fuse (aka the thermostat) to blow, or the heating lamp in the fuser unit is blown. Basically the 6000 code is displayed when your machine fails to reach the correct temparature at a specific time. Unfortunately you will have to call a service person to check which to of the mentioned components are at fault and to replace that component for you. After replacing, the component the code will still be displayed as a safety measure, so the service representative will need to clear the code via the machine's service mode

Sep 22, 2008 | Kyocera Copystar CS-1820 Black and White...

Not finding what you are looking for?
Copystar CS-1815 Printer Logo

Related Topics:

448 people viewed this question

Ask a Question

Usually answered in minutes!

Top Copystar Office Equipment & Supplies Experts

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Tammie Duggan
Tammie Duggan

Level 2 Expert

38 Answers

polytek

Level 3 Expert

452 Answers

Are you a Copystar Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...