Make sure you do as it says on the pairing section. i was having the same problem (no devices found) until i followed as it said on #2, when wep200 is off press the multi-function key until the blue light comes on solid approximately 8 secs. I have a samsung instinct and it read just fine after that.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
1 Set your Bluetooth phone to discover the
headset by following your phone's guide.
Typically, the steps involve going to the Settings,
Connection, or Bluetooth menu on your
phone and then selecting the option to discover
Your phone will find the Samsung WEP200
2 Select Samsung WEP200.
3 When the phone asks if you want to pair with it,
confirm by selecting Yes or OK.
4 Enter the headset passkey or PIN, 0000.
1 Turn your bluetooth headset off. If it is on, press and hold multi-function button(for about 4 seconds) until the LED blinks twice.
2 Prepare your bluetooth enabled phone to be ready to go to search mode.
3 Turn your bluetooth headset on in pairing mode. (Press and hold the multi-function button for almost 9 seconds. The LED will be steadily LIT.)
4 Activate the Search option in your phone. You should see Samsung WEP200 in your phone's screen. Choose that and press OK
5 The phone will ask for a passkey.
Then press OK.
Give it a few seconds, your phone and bluetooth headset will be paired.
blue tooth is a usb transmitter.
so obvisously u got to get the 2 to the right frequency.
look for a small button to press on the samsung...sounds like u need the manually. look online for it.