- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Heard lots of problem with similar case for this tv,you need to buy upgrade kit from the haier itself, there also available at Sears you will get instruction sheet will contain all information all you need is screw driver to replace the parts Control Board TV-5210-39, Y-SUS TV-5210-35, Z-SUSj
TV-5210-37, New EPROM Chip 2006 version TV-2455-03, Upgrade Label
TV-4050-08 and Haier Service Bulletin SB-TV-0003 containing the
instructions to replace the boards yourself.
This is from Sanyo's site: - "No registration is necessary-hold on to your sales receipt. We will warranty the television from the date on the receipt." - If you have bought an extra warranty from the store then go to the site of the chain of stores that have sold it to you - in there, usually directly on the front/home page, you will find the link to the registration page.
There should be different HDMI slots on the back of that TV. Switch you HDMI cable to use another slot. Change to that HDMI slot on your TV menu. Sometimes the ports go bad, or there is something messing with the signal.
The HDMI can carry sound and video. Make sure that in your tv menu that your tv is setup under audio has the receive audio from hdmi as well.