Cooker lofra it blue the plug but not the main cooker fuse is ther a cut of in cooker motor the ignition button for the burners is now working but the main oven is not HELP

You could check the igniter by testing to see if 120 volts is at the wiring the igniter plugs into, if 120 vac at that plug the igniter is bad Also need to check THERMAL FUSE,in addation to thermostat,on electric dryers if thermal fuse is out it cuts circuit to motor, on many brand dryers if thermal fuse bad on GAS dryer it cuts circuit to igniter

Hi Cecchung,

I think I know it.
Modern cookers have semi automatic ignition. Behind every knob there is a hidden switch and the switches are wired in "parallel". That means, when one button is put in "sparkstand", all plugs will spark. At least it should be.
In the youtube movie you can see how these switches are in a string.
So I suppose that the switch behind the button for the main burner does not work.
Fortunately, you still can lit that burne r with the other buttons.
Look at the movie, may be you can fix it yourself.

Kind regards, Dik
Maytag Gas Stove Burner Won Light Spark Ignition Switch

HOW DO I PUT THE DOOR BACK ON A LOFRA RANGE COOKER

There's no doubt you need a replacement. Take the
measurement of the glass, ( length, width, and thickness), then go to the glass dealer store and look
for a high temperature glass for your cooker. Another
option is to go a lofra mxg96ggi/c dealer amd order
a replacement glass.

do you have a clue where i can grip some knobs for lofra gas cooker.
MXUD66GGI. i have tried every where can you help me.thanxs.

Hi,

It sounds like you need to check the fixing screws of the oven,failing this replace the hinges.

I hope this helps.

Figured out the triangles mean fan. I blows the hot air down. Still no clue about the other one. Found the sparky thing and scrubbed it with a wire brush (making sure the gas was off). After many more attenpts I turned on the top burner and tried again and it lit finnnnnaly.

Hi looked on the wed could not find anyone only lofra try try them, hope this helps

Sadly FIXYA has none of that information either try the manufacturer website

there usually is a unit at the back that is the ignitor i don't know on this model but it should have a fuse fitted to the igniter, its usually 3amp, check and see if it has blown this fuse. check it with another fuse and see if there is still a problem the fuse will blow if it gets a back feed. this could be form the switch that you push.