Question about Whirlpool Kitchen Ranges

3 Answers

The oven on my Whirlpool cooking stove Model #SF367LEKQ, serial #RM1518684 does not work. Boiler works but not the oven. Oven comes on for a few minutes and then goes off.

Posted by on

  • bonifacio Aug 19, 2008

    This is what the problem other technicians thought it was. They were recommended by Sears. After checking for loose connections, charging me $150.00, and refusing to make good on the labor warranty the oven still does not work.

  • bonifacio Sep 04, 2008

    Can you provide me a parts number for the PC Board and an idea on what section of the stove this part is locate in?

    Thanks

    biv

×

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Whirlpool Master
  • 19,396 Answers

You do not know if it is a lose connection, that is just an easy diagnosys from somebody that did not want to waste much time on the problem.
When Oven is not heating check:
Wirings and connections.
Heating element
Knob control.
You need to test parts and wiring with a multimeter.

Posted on Aug 31, 2008

  • Ginko
    Ginko Aug 31, 2008

    Pc board?! You posted on the wrong problem mate, this is a oven.

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 382 Answers

Hello,
Please check the Pc board it can be faulty so that the oven doesnt work so.. thank you..

Please post back on how things turned or for further assistance..

Regards!!..

Posted on Aug 18, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 87 Answers

There might be some loose connections inside the machine try fixing it by opening the machine else cal for the sernice man it can solve the problem

Posted on Aug 18, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What's wrong and how do I fix it?


The circuit breaker outside in the power panel for the stove has a bad breaker. It will be two breakers with their handles joined together by a pin so if one tripe it takes the other so 220 V is no longer present. When one, but not the other trips you only have 110 V. That's why the lights and clock still work but no heating elements.

Nov 16, 2015 | Frigidaire Kitchen Ranges

1 Answer

Eaton viking imperial electric,stove oven door will not close completelty; circa 1996. are replacement hinges still availible?


To the owner of the Eaton Viking stove RS3028W-1, yes you CAN get replacement hinges!
I too, have this stove model (circa 1996) with exactly the same problem and I have spent the past 18 months looking for replacement oven hinges. I was very frustrated at the thought of having to throw out a stove that cooks and bakes wonderfully and has not needed any repairs till now and having to buy one of the new subpar ones that constantly need repairs. Plus you can't do canning on the new stoves and the few remaining coil models are extremely poorly made.
I have found 2 places that carry the hinges.
1. Reliable Parts, 1-800-663-6060. This company is located in Montrea (St. Leonard), Quebec.
2. Appliance Shark, 1-800-663-1176. This company is located in Barrie, Ontario.
The part number for the hinge is: 318-024-741

I hope this is helpful, and may you have many more years of happy cooking on this great stove.

Sep 17, 2014 | Eaton Computers & Internet

1 Answer

I have a shacklock multifunction twin- oven stove. Sometimes during cooking the digital panel starts flashing and the 'Auto' word comes up. Stove stops cooking and cakes are ruined unless I...


Hi - It will seem the electronics PCB is on the way out - it should be replaceable at what cost I cannot be sure. The best option would perhaps be to upload the actual model of the oven and its serial number & perhaps I can check on the F & P database if the parts are readily available.

If you can provide the details and country of abode I will see what I can do for you in regards to parts.

Jul 15, 2011 | Fisher and Paykel Kitchen Ranges

1 Answer

Hello, We have a Kenmore gas stove model # 71761. The burners on top work good.The issue is with the oven portion. Oven is working. Flame comes on upon ignition to desired temperature setting and then...


It sounds like yous stove is working fine. Cycles fine. If you think the stove is cycling more often than when new then ck the seal on the door. You may be loosing heat.

Jan 14, 2011 | Ovens

1 Answer

Whirlpool Super Capacity 465 oven won't turn on


My Whirlpool Super Capacity 465 oven

Mar 15, 2010 | Ovens

1 Answer

Hotpoint self cleaning oven won't heat


maybe a bad connection with the heating element. Check to make sure bottom element is pluged in all the way. May need to be replaced if anything looks strange (ie. burnt spot, hole, srrange color, or maybe no external sign)

Aug 15, 2009 | General Electric Stove/Oven/Range Chrome...

2 Answers

Amana oven not working and boiler also


Check the oven sensor it may be the problem. Also check the lock assembly. When in self clean does your bake come on too? It should come on with the broiler.

Dec 21, 2007 | Amana RanARG7302 Gas Kitchen Range

2 Answers

Whirlpool accubake oven troubleshooting


electric oven heats to correcect temp then drops and does not get back too appropriate temp. For example, set at 400, gets there then drops to 275-300

Dec 18, 2007 | Ovens

1 Answer

Oven stopped working while cooking a meal


it sounds like it burnt one of your main wires in the back of range. by turning a knob on you are getting a feed back. turn the power off remove back panel take a visual check of your wiring.

Nov 23, 2007 | GE Profile JKP18 Electric Single Oven

Not finding what you are looking for?
Kitchen Ranges Logo

Related Topics:

157 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Ismael Rodriguez...

Level 2 Expert

162 Answers

Cindy Wells

Level 3 Expert

4888 Answers

Are you a Whirlpool Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...