a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Technician (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
turn off your computer. plug in your printer to power. plug the printer cord into printer and then into computer. turn on your computer. if you have the cd that came with it place it into the cd drive once the computer boots up. your computer should detect the new equipment and walk you through the set up wizard. if not go to the control panel and "add hardware" to tell your computer to detect the new equipment which will start the install wizard... good luck!
You mean connect printer to computer . Before connecting the cables , insert the install disc in the computer drive and follow instructions . When installation os software/driver is completed , connect the USB cable to computer and printer and power cord from printer to AC plot . Press the power button and wait for Windows to confirm installation is successfull . You can now use yoiur printer . Best regards , fanaudi .
connect the power cord and USB cord to the printer and computer, then turn on your computer. when
your computer is fully operational, ainya will detect your printer is
installed, usually it will prompt you to insert the cd printer, if not,
you also need to put the installation cd for the printer and then run
the installation using the cd.
Relaying on what you wrote, I understand you don't have an internet connection on the computer you're using...If so, use another computer, which connected to the internet and has a CD burner and software and download THIS file. Burn in on a CD and intall in on the Windows 98' computer.
The HP 640C will connect to a PC with either a parallel or a USB cable. If you are connecting to a Mac computer, you will connect to your PC with a USB cable. I would recommend the USB cable for either the Mac or a PC as it is a better connection. If you do not have either of those cables you will need to buy one from your local computer accessory store. Turn off your printer and computer. Connect your cable to the printer and computer. Then boot your computer, and once the bootup finishes, turn on the printer. At that point you will have to install the software driver cd that came with the printer. If you do not have the software you can go to the HP website and download the correct drivers for your computer.
Try this. Before connecting the printer put the printer driver cd in the drive and install the drivers. If not asked to connect the printer, then restart the computer with the CD in the drive Connect the printer. Printer will be detected.
USB is the most common household printer to computer connection, just plug the printer in and it will walk you through the windows set-up, or put the CD from your printer in your computer and the CD set-up will walk you through the set-up, when you buy a printer ask a sales person to show you how to connect it and set it up.