Question about Frigidaire FEX831CS Top Load Stacked Washer/Dryer

1 Answer

Dryer works - washer won't do anything!

The other day I started a load, the water started to fill and then it stopped completely after about 10 seconds. The dryer works fine, but the washer is "dead." Tried unplugging it and plugging it back in and also checked for loose wires and didn't see anything. Any suggestions??

Posted by on

  • aliakos Aug 25, 2008

    Got the solution - there was an older breaker in the electric box that would allow the dryer to work, but the washer was too much for it to handle. Replaced the breaker and it is working like new!

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 639 Answers

Sounds like an Electronic problem.
You should call service.

If it's 10 years old or more, better off replacing it with a newer machine which will be much more efficient!

Try :
A&E Factory Service
1-800-905-9505
Nation wide / 7days/24 hours
Good work

Please give me a solution solved rating in this site
Thank You
Neil

Posted on Aug 24, 2008

  • Neil
    Neil Aug 25, 2008




    Please give me a solution solved rating in this site


    Thank You


    Neil



×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Washer temp setting changes by itself


I also have a Whirlpool washer/dryer for my condo, although I don't know the model number of mine. I had the same problem -- after it was precisely a year old, suddenly one day the hot and cold started coming out reversed. I was able to fix mine by more or less temporarily fiddling with the water pressure. What I did was one time, when the rinse cycle was running and the washer was filling up with hot water (grrrr...), I completely shut off the valve supplying hot water. So at that point the water stopped filling into the washer, and then I started tinkering with the cold water, twisting the valve off and on a few times. Then BINGO, suddenly the cold water "kicked in" and for the remainder of the rinse cycle, it filled the washer with cold water. I then turned the hot water valve back on, and since then it has been running correctly.

Jun 05, 2010 | Whirlpool Washing Machines

1 Answer

Washer won"t fill with water


check your lid switch if its a top load

May 18, 2009 | Maytag LSE7806A Top Load Stacked...

1 Answer

WASHER FILLED WITH WATER AND STOPPED WORKING COMPLETELY


if you hear a motot running the coupling between the motor and transmission has disinagrated.

Dec 26, 2008 | Maytag MAT12CS Top Load Washer

1 Answer

Fills with water and that's it


ck the water pump, only if it agitates but doesnt drain. If it completely stops after filling, ck lid switch(should here clicking noise from sw.)

Oct 21, 2008 | Frigidaire FEX831CS Top Load Stacked...

1 Answer

Water won't work but dryer does


Mine did the same thing and it ended up being an overloaded older breaker in the electric box. It would allow the dryer to work, but the washer was too much for it to operate. Had the breaker replaced with a new one and it works fine. Hope this helps!

Jun 14, 2008 | Frigidaire FEX831CS Top Load Stacked...

Not finding what you are looking for?
Frigidaire FEX831CS Top Load Stacked Washer/Dryer Logo

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Washing Machines Experts

Electrolux
Electrolux

Level 3 Expert

4342 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Are you a Frigidaire Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...