Question about Zyxel Prestige 660H Router

1 Answer

Cannot connect the the Zyxel page to configure my Embarq router.

When I put in my IP address in the address box it fails to connect to there page. Instead a failed connection page comes up. It worked the first time and then it froze on me. I have access to the internet, but not to this site. I rebooted my computer several times, but still won't connect. This is the first time I personally have attempted to configure my router so I am definitely a novice. Any ideas? Thanks. Jason

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,961 Answers

You can check the router ip address by going to network connections in control panel and then, right click on connection icon>status, then support tab, there will be the ip address of your pc and the default gateway address which will be your routers address.

If you still cannot get into the router, there will be a hard reset button on the underside or rear of the unit.

Posted on Aug 18, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lost my IP address from zyxel


According to me there are two reason for not connecting to internet through your ISP.

1. Configuration setup might have got deleted
2. Driver files may be corrupted

An important thing to know is We would not lose our IP address.

Static IP address wouldn't be changed while restarting our modem,
Dynamic IP address changes on every restart of our modem. To know the Current IP address the following URL will be useful to you. http://www.ip-details.com/

Jul 25, 2012 | Zyxel P-2602HW Router (P2602HW)

Tip

How to Configure Belkin routers for Centurylink, Embarq, Bell sympatico, Bell...


How to Configure Belkin routers without installation CD for Centurylink, Embarq, Bell sympatico, Bell Canada ISPs ?
Configuring Belkin routers without installation CD for Centurylink, Embarq, Bell sympatico, Bell Canada ISPs :
  • Connect the Computer to the Router in one of the 4 ports named wired (usually grey in color) using an Ethernet cable.
  • Do not connect the modem to the router.
  • Open internet explorer / Firefox / chrome or any of your default web browser.
  • In the address bar type the default gateway address of Belkin router i.e., 192.168.2.1
  • Belkin router setup page (RSP) will be displayed.
f7dd033.jpg
Wired Part Configuration:
We need to configure the wired part by following these steps.
Step 1: You need to LOGIN to the router for making any changes. (No login password, just leave it blank and click SUBMIT)
Step 2: Click on LAN settings (found on left side of RSP), change the IP address from 192.168.2.1 to 192.168.40.1 and save changes.
Step 3: Now Connect the DSL Modem to Router in the port named Modem (usually yellow in color) using another Ethernet cable.
***Once you are done that, you need to re-login to RSP by typing the new IP address 192.168.40.1 in the address bar of web browser.

Step 4: Check for the internet status at the top right hand corner of RSP. If it is connected then the wired part is working perfect with the router (wired computers will go online). Need not follow the steps below, directly jump to wireless part configuration.
Step 5: If the Internet Status is not connected then, click on CONNECTION TYPE (found on left side of RSP), it has to be selected as DYNAMIC and click next. It will ask for HOST NAME, leave it blank or you can type anything there and click on APPLY CHANGES.
Step 6: Now check for the internet status at the top right hand corner of belkin RSP. If it says connected then everything for the wired part is configured perfectly. You can go ahead and configure for the wireless part.
If it is not connected then we need to do a network power cycle.

Steps to be followed for performing Network power cycle:
  • Unplug the power cable of both your modem and router.
  • Wait for 30 seconds.
  • Plug back the power cable of the modem and wait until all the lights are lit up in it.
  • Now plug back the power cable to the router and check for the lights in the router.
Modem & Internet lights will be lit and they will be solid (blue/green) in the router; it says that the Internet status is connected. Now you will be able to go online in the wired computers.

If still Modem & Internet lights are not solid in the router; it may be blinking in red/ amber it says that the Internet status is not connected. You will not be able to go online in the wired computers.

In this case you need to connect your computer directly to the modem and check whether you are able to go online. If you are not able to go online, then you need to contact your ISP and fix your issue with internet.

The above method is applicable only for Embarq, century link, Bell Sympatico, Bell Canada ISPs. Because these ISPs will have the IP address same as Belkin routers....

If nothing works then you need to contact your ISP and ask them to bridge the modem...Bridging the modem disables NAT in the modem and allows you to get a public IP in the modem.
click here to configure wireless part...

on May 09, 2010 | Computers & Internet

1 Answer

I was helping a friend who has Earthlink DSL (a ZyXel DSL modem) to get her Linksys WRT160N wireless router working with the Earthlink modem. No luck. Earthlink won't help unless you pay $7.95/mo with a...


Hello mcneel,

The router should use the ZyXEL P600 as it's DHPC Server. And review/update the ZyXEL WAN configuration as follows:

• Log on to the ZyXEL P600 browser configuration interface: 192.168.1.1
• Enter username/password: Default is username:admin - password:1234
• Click '+' by Network in the letf-hand panel
• Click WAN
• In the Internet Connection tab, select the following options:
...
Name - (Any Name)
Mode - (Routing)
Encapsulation - PPPoE
User Name - (ISP login username eg. MyName@isp.com)
Password - (ISP Login password)
Service Name - (Leave Blank)
Multiplexing - (LLC)
Virtual Circuit ID
VPI - (Leave Blank: Issued by ISP)
VCI - (Leave Blank: Issued by ISP)
IP Address
Obtain an IP Address Automatically - ([X] Check this option)
Static IP Address - (Not Selected)
IP AddressI - (Leave Blank)
Connection
Nailed-Up Connection - ([X] Check this option)
Connect on Demand Max Idle Timeout sec
...
• Click 'Apply' button
• Close the browser configuration interface page


Finally, this link to the EarthLink DSL FAQ Setup Installation and Configuration page might offer some useful suggestions:
http://www.dslreports.com/faq/earthlink/30_Setup_Installation_and_Configuration

If this solution is helpful please click a thumbs-up rating below.

Have a great day,
martyshaw152

Feb 04, 2010 | Zyxel Prestige 645M (AM408405) Bridge

1 Answer

Am trying to set up a Windows 2003 server to serve web pages over the Internet. Have got a DSL line from Embarq. They installed a EQ-660R interface which is really build by Zyxel. I can reach the Internet...


In order to access your default web page remotely, port 80 "INBOUND" must be open to the internet.

To access your web server, two things need to happen.
The first is you or someone else must initiate a http request on port 80 using the public IP Address of your DSL connection.
Second, your router must forward that request to your servers internal ip address.

Ex. Lets say your public ip address is 24.39.45.10. In a browser window from a remote location, you enter the URL http ://24.39.45.10 The request will be sent to your router on port 80.

Your web server will not have the ip address 24.39.45.10 because it's on the private network side of your router. So, lets say the private ip address of you server is 192.168.1.100

You need to configure your router to take the http request coming from the internet on port 80 to ip address 24.39.45.10 and forward that request to 192.168.1.100. This is known as port forwarding.

You also need to configure the host header name of your "web page" so it knows it needs to display the web page.

Since we're just using ip addresses in this example and not an actual FQDN (fully qualified domain name), you would make a host header entry for the web page of 24.39.45.10.

To do this open IIS.
Navigate to the web site in question and right click on it then select properties.
On the website tab, ensure the port number is set to 80 and choose the appropriate internal ip address if you have more than one network adapter in the server.
Next click on the advanced tab and look for the heading Multiple identities for this site. This is where you enter the ip address 24.39.45.10.

If you have a fully qualified domain name, you would enter the domain name instead of the ip address as specified in this example.

Host header names are the key to running multiple websites from one physical server as long as it has the necessary horsepower to do so.

Hope this helps and isn't confising. If you're confused in any way, don't hesitate to ask for clarification.


Sep 13, 2009 | Zyxel P-660RU-T1 ADSL Ethernet/USB Router...

1 Answer

No connection via Ethernet between Zyxel P-660HW-D1 and PC


Hi Friend,
Before Connecting your internet we must check in ur system.

1.Go to Start---->Run------>type cmd----->in the black screen type ping 127.0.0.1
2.check wither its getting reply or request
3.If u are getting reply then ur system is perfect i.e., your NIC Card is installed properly.
4.check wither any proxy is enabled in the LAN settings.
go to browser--->tools---->internet options(Options)----->Connection--->Lan Setting--->there should noy be any tick mark in the boxes

Now we can check the connectivity,
1.Connect the PC from the Router Lan Port and the modem connectivity to the Wan Port of the Router.
2.Assign the Ip address as obtain ip address automatically

Right click networkplaces--->properties--->Lan Connection Properties---->double click the internet protocol(Tcp/IP).In the next box u must select the Obtain Ip address automatically

3.Now u switch on the modem after 30 sec switch on the Router.
4. Launch your web browser.
5 Type "192.168.1.1" as the URL.
6For administrator access enter the default admin password 1234 to configure the wizards
and the advanced features.
7 Click Login to proceed to a screen asking you to change your password or click Cancel
to revert to the default password.
8 If you entered the admin password, it is highly recommended you change the default
admin password! Enter a new password between 1 and 30 characters, retype it to
9.Then u can configure the ip address


Regards,
Ayyasam

May 29, 2009 | Zyxel P660HW-D1 Router

2 Answers

Xbox Live connection problem


Hi,
In this regard, I would recommend you to forward certain port no’s on
the Router.

Port numbers: UDP- 88, TCP/UDP- 3074

It is in this context, I would suggest you to please try with the
following troubleshooting steps:

A) Assign static IP and DNS address to the XBOX.

1. Assign IP address as: 192.168.1.50; Subnet mask as: 255.255.255.0
and Default Gateway as: 192.168.1.1
2. Assign Primary DNS Address as: 192.168.1.1 and Secondary DNS
Address as: 4.2.2.2

# Please Contact X-Box Technical Support to assign the Static IP
Address on Your X-Box.


C) Open the ports on the Router using the following steps:

1. Click on Port Forwarding under Advanced.
2. Click on ‘Port Forwarding’ on the left hand column on the screen.
3. On the bottom of the screen, click on ‘Add Custom Service’.
4. Give a name to the service (for example, XBOX1).
5. Select Service Type as UDP and key in the starting port and ending
port as 88.
6. In the Server IP Address specify 192.168.1.50
7. Hit ‘Apply’.
8. Click on 'Wan Setup' Under 'Advanced'.
9. Check the box 'DMZ Server'. Type in the IP Address 192.168.1.50.
Click On 'Apply'.
10. Log Out of the Router Page.

Please repeat Steps 3 – 7 to configure the ports “UDP/TCP 3074”.

Apr 13, 2009 | Zyxel Prestige 334 Router

2 Answers

How can I secure my zyxel Router P-330W at home?


hi...
you need to go to the computer which is connected wired to the zyxel box,in the computer click on start,run,type in cmd,and hit enter,on that black box type in ipconfig,hit enter,you wil get a list of result check default gateway(eg of default gateway is 192.168.0.1)go to internet explorer page,in the address box type in the default gateway without http or www,it will open the zyxel page for you,it might prompt you to put in the user name and the password,if it does then donot put anythingin the name of username and put 1234 as password,in this page you will see an option that says wireless,click on wireless and then click on advanced,under you will see the wireless security option where you can go ahead and make you wireless connection secured.
http://us.zyxel.com/upload/download_library/P330W_UG_V_1%201(5).pdf..this is a link for user guide u can download this to udnerstand other features that there in you router..
vedhick

Feb 26, 2009 | Zyxel P660HW-D1 Router

1 Answer

Zyxel nbg334w router configuration


Hi

To configure the wireless router it is recommended the it is connected directly to router.
Please follow these steps to fix your issue

1. Reset the router using reset button on the back of the NBG334W router
2. Configure or change the laptop ehternet adaptor setting to "Obtain IP address automatically.
3 connect laptop and router using ethernet cable. check the ip address using ipconfig command in DOS prompt. If IP address is 0.0.0.0 or 169.X..X..X run command
ipconfig /release
ipconfig/ renew

best way restart the computer

4. if you still have issue in getting ip address double check ethernet cable and try reseting the router again.

5. Still problem persist install new firmware on the router. you can download router firmware from
http://www.zyxel.com/web/support_download_list.php?indexflag=20040906164737&ModelIndexflags=0,420070320142921

Please vote if this information is helpful in resolving your issue



Dec 27, 2008 | Zyxel Prestige 334 Router

1 Answer

Configuring nbg334w router


To configure the wireless router it is recommended the it is connected directly to router.
Please follow these steps to fix your issue

1. Reset the router using reset button on the back of the NBG334W router
2. Configure or change the laptop ehternet adaptor setting to "Obtain IP address automatically.
3 connect laptop and router using ethernet cable. check the ip address using ipconfig command in DOS prompt. If IP address is 0.0.0.0 or 169.X..X..X run command
ipconfig /release
ipconfig/ renew

best way restart the computer

4. if you still have issue in getting ip address double check ethernet cable and try reseting the router again.

5. Still problem persist install new firmware on the router. you can download router firmware from
http://www.zyxel.com/web/support_download_list.php?indexflag=20040906164737&ModelIndexflags=0,420070320142921

Please vote if this information is helpful in resolving your issue

Dec 27, 2008 | Zyxel Prestige 334 Router

4 Answers

Trying to configure zyxel nbg334w router


If the router will not connect to the internet, you will need to create the PPPOE internet connection with the username and password that your ISP provided. BPCS

Dec 28, 2007 | Zyxel Prestige 334 Router

Not finding what you are looking for?
Zyxel Prestige 660H Router Logo

1,025 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zyxel Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Justin
Justin

Level 3 Expert

2072 Answers

mark

Level 2 Expert

105 Answers

Are you a Zyxel Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...