E6 error on Xerox WorkCentre 420 PRO - Xerox Office Equipment & Supplies

Switch off the M/C then press & hold zero button & on still when screen will display (---) then press '10' start button '1' start button. now your M/C showing 3 so you change it press '0' button then switch off &on

Service manual, registration required:

https://www.scribd.com/doc/131575367/WorkCentre-123-128-133-Service-manual

http://www.copytechnet.com/forums/xerox/66901-error-041-366-document-centre-286-a.html

pro 423 doesn't support vista or win 7

change le drum cartridge

replace drum unit chip

p/l call to xerox cust care center this bater solutions

Error code means that:
H2 Thermistor Open

Part #
Xerox Workcentre Pro 16FX, Xerox Workcentre XD100, Xerox Workcentre XD102, Xerox Workcentre XD103F, Xerox Workcentre XD104, Xerox Workcentre XD105F, Xerox Workcentre XD120F, Xerox XC1020, Xerox XC1040, Xerox XC820

Mfr Part #: RDTCT0128FCZZ


Xerox Workcentre Pro 16FX, Xerox Workcentre XD100, Xerox Workcentre XD102, Xerox Workcentre XD103F, Xerox Workcentre XD104, Xerox Workcentre XD105F, Xerox Workcentre XD120F

Mfr Part #: CTHM-0019DS52, CTHM-0019FC52

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe



I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Hello sir; The U-9 code means the main control unit/switch board problem, replace it.

Hi, I made a mistake, sorry. It is not a 423 Greyscale etc.. that I own but a Xerox Workcentre pro 420 black and white photocopier. I have but no manual to find out how or if it has a 'mirror' or 'inverse' function. Thanks 

error #22