Question about Kenwood Sirius KDC-MP425 CD Player

1 Answer

Peugot 206 car radio needs decoding

Serial no;cl0410y0033410
thankyou

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Kenwood Master
  • 4,706 Answers

First make sure that the code has not been noted somewhere within the car (underneath the ash tray, glove box , rear of sun visor etc) 

To see if your code is available here for free then the radio will have to be removed from the dashboard (and if you are lucky, someone may have written the code on the casing ) .

If not then POST ANOTHER QUESTION

quoting the radio MAKE+MODEL plus ALL the LETTERS+NUMBERS on ANY LABELS ,BARCODES or STAMPED IN THE METAL CASING

note: Unfortunately not all radios can be decoded using the Serial Number 

If not then try your Main Dealer ...........or take it into a Decode Service who will plug in a laptop to read/recode the memory chip (EEPROM). This takes a few minutes and shouldn`t be too expensive 


Posted on Sep 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bought a peugeot 206 w reg april 2000, registered with locked radio and don't have code,how do I decode?


If it is a stock radio, you will have to phone your Peugeot dealer and give them your VIN or chassis number. They will then track your number through your Chassis number

Jun 08, 2010 | Blaupunkt RPD-545 CD Player

Tip

Ford Fiesta CD Radio Code


If you have lost the code for your Ford radio and the radio is showing CODE---- on the display there is a very cheap way to reset the radio and have it back up running in no time at all.

Ford themselves charge £20 - £35 for this service but you can get this code here for just £3.50 with an absolute guarantee to work or your money back from this site. These guys specialise in Ford Radios only and I have used them on several occassions myself without a single problem.

By using this site you are verifying that you are the owner of the radio. This information is already in the public domain and you are entitled to it. Fast friendly and reliable service. Click here.

Most manufacturers nowadays have tied their radios to both the serial number and the VIN (vehicle identification or chassis no.) of the car they are in. This makes decoding more difficult and of course improves security. However as the legal owner of the radio it also means you are tied in to Rip Off dealership charges!

Ford however is an exception to this rule in radios up to year 2007. The absolute majority of these Ford Radios can be decoded by serial number alone and this removes the difficulty and requirement for dealership help.

First you will need to remove the radio from the dash and you will find the serial number on a sticker on the case. This begins with a letter which is followed by 6 numbers..

Example M123456 for M series radios

or A123456 for A series radios.

Only later Ford Radios (from around 2007) with a V prefix cannot be decoded via this method and the Ford dealership must be used for these at a much higher cost as stated.

All other serials with A,C,L or the most common M letter prefix can be decoded cheaply as outlined.

If you found this information helpful please do leave a vote for it.

Many thanks for using FixYa.

on May 09, 2010 | Car Audio Receivers

Tip

Ford Focus Radio Code


If you have lost the code for your Ford radio and the radio is now locked and asking for a code, there is a very cheap way to reset the radio and have it back up running in no time at all.

Ford themselves charge £20 - £35 for this service but you can get this code here for just £3.50 with an absolute guarantee to work or your money back from this site. These guys specialise in Ford Radios only and I have used them on several occassions myself without a single problem.

By using this site you are verifying that you are the owner of the radio. This information is already in the public domain and you are entitled to it. Fast friendly and reliable service. Click here.

Most manufacturers nowadays have tied their radios to both the serial number and the VIN (vehicle identification or chassis no.) of the car they are in. This makes decoding more difficult and of course improves security. However as the legal owner of the radio it also means you are tied in to Rip Off dealership charges!

Ford however is an exception to this rule in radios up to year 2007. The absolute majority of these Ford Radios can be decoded by serial number alone and this removes the difficulty and requirement for dealership help.

First you will need to remove the radio from the dash and you will find the serial number on a sticker on the case. This begins with a letter which is followed by 6 numbers..

Example M123456 for M series radios

or A123456 for A series radios.

Only later Ford Radios (from around 2007) with a V prefix cannot be decoded via this method and the Ford dealership must be used for these at a much higher cost as stated.

All other serials with A,C,L or the most common M letter prefix can be decoded cheaply as outlined.

If you found this information helpful please do leave a vote for it.

Many thanks for using FixYa.

on Apr 25, 2010 | Car Audio Receivers

1 Answer

Need code for rover 75 radio since battery replaced. serial no. rg745wx1035632. many thanks


RG745WX1035632

Unfortunately the code for this Serial Number will only be available from your Rover Main Dealer or taking the radio into a Radio Decoding Service.

Apr 28, 2010 | Pyle Plc-dcs90m Cd/cassette/mp3 Car Radio

1 Answer

I need to remove clarion stereo form dash of peugeot 306 to find serial code for stereo


If you dont have the proper keys then you can still do it, if you have a small hole at either side then you need to place someting like a coat hanger in to them holes about 5cm deep then the radio will release. you may have the older style which you have to insert two flat pieces of metal along the bottom of the radio, if you look closely at the bottom of the radio you can see where it go's. otherwise call into your nearest peugot garage.

Nov 23, 2009 | Naxa Electronics Naxa Stereo AM/FM.MPX...

1 Answer

Radio code for clarion rd3-01,serial no


The only CLARION code available for free (using a serial number ) from anywhere on the Internet is if your radio also  has a BARCODE SERIAL NUMBER beginning with C7000000 + + + +  on a label somewhere on the metal casing.


(There are usually two barcodes on one label. The one required is the lower one )
 
 
If not then it will only be available from  your Main Dealer or a Decoding Service or your local Car Radio / Audio Store who will connect a laptop to read/recode the memory chip (EEPROM)

Nov 10, 2009 | Car Audio Receivers

1 Answer

Hi there, I have a Clarion radio/CD player that was fitted as standard in my Peugeot 206 (1994 model). My problem is simple - I have a CD caught inside the player. When you press the eject button all you...


There are usually two options 

1...See if you can tease the jammed CD out through the slot using another (old) CD

If not

2...The player will have to removed from the dashboard and opened up to remove the jammed CD.

Make sure you have the Security Code before removing the player.

.
 
If you do not have the code  then POST ANOTHER QUESTION

quoting the radio MAKE+MODEL plus ALL the LETTERS+NUMBERS on ANY LABELS ,BARCODES or STAMPED IN THE METAL CASING
 

note: Unfortunately not all radios can be decoded using the Serial Number
 

Oct 24, 2009 | Clarion DB538RMP CD Player

1 Answer

I need a stereo code Peugeot 206 Clarion cd/radio serial no: CL041010207605 Model: PU 2325A(B) I can source it via web site at £20, prob cheaper to replace the unit. Q: Can I get a cd to put in the...


A CD input is not the method used as the code is manually inputted into the radio using the push buttons on the front.(The method / instructions are below )

The only CLARION code available for free (using a serial number ) from anywhere on the Internet is if your radio also has a BARCODE SERIAL NUMBER beginning with C7000000 + + + + on a label somewhere on the metal casing.

(There are usually two barcodes on one label. The one required is the lower one )

If you have this barcode serial number then
POST ANOTHER QUESTION
quoting it.


If you do not have this number then it will only be available from your Main Dealer or a Decoding Service or your local Car Radio / Audio Store who will connect a laptop to read/recode the memory chip (EEPROM) 

==================================================

Clarion PU2294 Code Entry Instructions

After switching on the set the display show ' CODE IN '

Enter the code using station preset keys 1 - 6

Upon last entry the set will operate. 

Oct 10, 2009 | Clarion DB538RMP CD Player

3 Answers

Car stereo Code


hi, go on ebay and buy the radio unlock codes less than a fiver

Apr 17, 2009 | Clarion DB245 CD Player

2 Answers

Car radio decode


hi i can if you can supply the serial number.

Mark

Blue ICE

Feb 27, 2008 | Car Audio Receivers

Not finding what you are looking for?
Kenwood Sirius KDC-MP425 CD Player Logo

Related Topics:

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio Receivers Experts

xxxxxx xxx

Level 3 Expert

4706 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Pablo Gonzalez

Level 3 Expert

733 Answers

Are you a Kenwood Car Audio Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...