Question about Linksys Wireless-G WRT54G Router
All other lights are on but can not get the wlan light to go on
There is a possibility that the wireless broadcast feature of the router is turned off, you can enable this through the setup page of the router on the wireless tab.
if it is enabled on the wireless tab, then you may want to reset the router by pressing the reset button on the router for 20 seconds.now if this still did not work, try to contact Linksys tech support to get a firmware upgrade or discuss the warranty status of the device.
hope this helps
Posted on Aug 18, 2008
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: WLAN light on WRT45G
it will continuously blink . this shows the siganl is transmitting from the access point. and this frequency of this light blinking will increase when some client computers are connected to your access point or router
Posted on Mar 31, 2009
type ip adress in the browser it may ask for a user name and password after enering that you should be able to get online.
Posted on Jan 07, 2009
Reset everything including the Hard reset (a small probably hidden button you must press for 15 seconds) you will find somewhere on the wireless router. I trust your laptop is capable of connecting wirelessly???and you have done this before???
Posted on Sep 21, 2009
Also check if the power light on your router is blinking. If it is blinking, that's an indication of hardware failure. To revive it, do a hard reset. Press and hold the power button of the router for 30 seconds then unplug the power. Wait for 30 seconds again before you plug it back in.
Posted on Oct 27, 2009
SOURCE: I have a problem in
Sounds like it may be a hardware fault. Have you tried resetting the router? I don't have the exact model but there's almost always a recessed button on the back which can be pressed with a paperclip or something similar. Holding this for a few seconds will reset the router settings to their factory defaults.
The default Zyxel password is usually 1234 or admin.
Posted on May 05, 2011
Tips for a great answer:
May 04, 2011 | Zyxel P660HW-D1 Router
Jun 30, 2010 | Linksys WRT160N Wireless Router
Oct 27, 2009 | Linksys Wireless-G WRT54G Router
Mar 21, 2009 | Linksys : WRT54GS Wireless-G Router W/...
Jan 06, 2009 | Linksys Wireless-G Broadband Router
Oct 20, 2008 | Computers & Internet
May 04, 2008 | 3Com 7760 (3CRWE776075US) 802.11a/b/g...
1,536 people viewed this question
Usually answered in minutes!