Question about Washing Machines

1 Answer

Just want to know how to get the fasted wash as it seems to take about 1.5 hrs to do a load. zanussi xc6 1400

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,198 Answers

Check your screens on the fill valves. This is a good time to replace the fill hoses, the last thing you need is an old one to blow. Wash warm, rinse warm, both fill valves will be open. If you only use cold water, hook both fill valves to cold water, cold water will go thru the hot fill valve for a faster fill.

Posted on Aug 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Zanussi zwf1421


Thermostat or heater most likely causes. Does timer button move round without doing anything? Timer knobs on Zanussi notorious for breaking off inside.

Apr 28, 2012 | Zanussi F1245W Front Load Washer

1 Answer

When my zanussi aquacycle 1200xc is on the fast spin cycle the spinning drum seems to be getting noisier of late.


Probably the main bearings are going, spin the drum by hand, there should be little or no noise at all, if it feels rough, or noisy, then bearings are failing.
Please rate my solution.
Thanks.

Oct 10, 2009 | Zanussi F1245W Front Load Washer

1 Answer

Washer dryer sticks on j cycle does not spin or drain


check no foreign object stuck in pump impellor and that it turns freely. if that is ok then check continuity thro drain pump. if no muiltimeter, try connecting drain pump to mains direct to see it works

Aug 21, 2008 | Zanussi W1242W Front Load Washer

1 Answer

Zanussi FJS1225W


fault is probably the motor tacho( bit that measures motor speed) has dropped off or the circular magnet inside it has broken.
tilt the machine back at a good angle so you can get underneath and look at the end of the motor shaft (opposite end to the pulley). you should seea circular coil with 2 fine wires coming out of it. this coil is held in by a clip and it has probably loosened.

Jun 26, 2008 | Zanussi FJS1225W Front Load Washer

2 Answers

Zanussi aquacycle 1000 washing machine spin problem


this is possible due to a bearing collapse or bearing spider broken. this causes drum pulley to be out of line and the belt comes off

May 29, 2008 | Zanussi FJS1225W Front Load Washer

1 Answer

Heating element


hi yes they are different the fc1200w element is 1600 watts (£31 part 150867200-1)the jetsystem zwf1658 1900 watts its always better to use the correct part.

May 03, 2008 | Zanussi FC1200W Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

189 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...