Question about ViewSonic VX1945WM LCD Monitor

1 Answer

Screen goes white after 12 seconds

On my viewsonic when you turn it on it works fine for about 12 seconds then a wgite fade starts horizontally in the middle of the screen and spreads until it is completely white. I can turn off the monitor to reset but it happpens again. Anyone have any ideas?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 981 Answers

Per the first hit on Google for 'viewsonic fades white', http://forums.worldofwarcraft.com/thread.html;jsessionid=A68BB7FE4AF6EC93EB730E8588C865A2?topicId=4064461903&sid=1
(which you should go on and read in another tab,) you need to contact Viewsonic about an inverter board (for the CCFL backlight) or switching your backlight to LED while spoofing the INVERTER_OK signal to keep the display from giving up as it does.

So...this should be a hint that you should respect others' time (or be moved to increase usability) better by searching for cures in similar Viewsonic monitors, and of course checking the obvious search terms.  Viewsonic evidently has a nifty knowledge base available for all on the web, so that one would be a nifty surprise.

Posted on Aug 18, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Viewsonic va2431wm monitor, lCDd slowly fade from normal screen to white. The monitor turns on but only get white screen, no color. Open monitor, nor bad capacitors. Why no picture?


Hello, unfortunately this is usually due to hardware problem, In this specific situation it is most likely the problem with lcd panel itself (electronic on panel). Sometimes it can work after the units becomes cold (not working for some time) and you power it on again.
Anyway if you are not familiar with electronics , please visit proper service center, due to the high voltage inside.
Hope this helps.

Oct 21, 2014 | ViewSonic Va2431wm LCD Monitor

1 Answer

Fading colour


If your LCD TV or monitor has stopped working, or is displaying one of the following symptoms, then it's a candidate for some new capacitors
- Flickering screen
- Screen image disappears after several seconds
- Dim screen
- Slow start
- Power LED on, but no picture
- Unusual colors and/or lines
The primary cause of LCD TV and monitor failure is caused by faulty capacitors. You can examine the capacitors in your LCD TV or monitor and actually see if they are bad.
If they appear bulged on top, then they need to be replaced.
New capacitors will solve a host of problems in LCD monitors and TV's and will extend the life of your monitor or TV by several years.
Take it to a repair shop.

Apr 07, 2014 | ViewSonic VA1703wb Monitor

1 Answer

My viewsonic vx924(vs10162) start very good when i turn on my pc then after 2 or 3 seconds goes white but i turn it off and on again and it works just fine i try it with other pc and does the same what can...


Hello,

The picture board on your monitor is bad, since the power led or button is on and all connection are correct and goes blank after few seconds, it means the picture board of your monitor has developed fault.

The best thing for you to do now is to take the monitor to a local repairer within your vicinity to help with the replacement of the picture board because the fault is not something you can fix yourself, in order not to complicate issues.

Take care

Jul 04, 2010 | ViewSonic VX922 19" Monitor Flat Panel

1 Answer

Hey I have a viewsonic VX2245WM and my problem is that when I turn my computer on the monitor light goes red-ish like a red light that is starting to fade away and the screen is completely black like its...


Almost the same chassis as VX2235.
Most common failures in the LCD monitors are bad capacitors (bulging top/seal or leaking) in the power supply, blown fuses, failed inverter circuits (blown fuse, shorted transistors, shorted/open transformers), bad lamps (poor solder connections or worn out lamps). You will need to open it up and inspect the inside, see example of failed VIEWSONIC monitors to get some ideas what to look for: http://s807.photobucket.com/home/budm/allalbums
Post back what you see inside so we can guide you further and it will help out other people in the future also.
http://en.wikipedia.org/wiki/Capacitor_plague
http://www.badcaps.net

May 19, 2010 | ViewSonic VX2245WM LCD Monitor

1 Answer

White horizontal lines flicker and screen goes off.


check the wiring inside the monitor, pull the sceen out and move the wires with the screen on so you can see when it's working. then tape the wires where it works.

Dec 16, 2009 | Proview PL926WBi 19" LCD Monitor

1 Answer

ViewSonic monitor VS10780


i turn on after 30 sec turn off that happen all the time

Feb 19, 2009 | ViewSonic VA720 17" LCD Flat Panel Monitor

1 Answer

Vx2235wm lcd flickers a bit then turns white


White screen is an indication of a faulty video board.
A blown fuse in the actual screen will cause the same effect but usually these do not reset on a fresh startup.
You can check the ribbon going from the video board to the back of the screen to see if it is somehow working loose, but I think based on your description that this isn't the problem.
ebaysbammbammfran

Oct 07, 2008 | ViewSonic VX2235wm LCD Monitor

2 Answers

Solid line completly across screen, monitor is brand new


Your comp's video card refresh rate (in Hertz, abbreviated Hz) may not be totally compatible with the monitor. Check the properties of your video card, and change the refresh rate (you may have to look around for it) to 60 Hz. This is a pretty standard refresh rate that works with just about every monitor. If it's already there, I'm afraid someone else will have to try and help!

Hope this helps, and please rate my answer, good OR bad.

Good luck!

Feb 04, 2008 | ViewSonic OptiQuest Monitor

Not finding what you are looking for?
ViewSonic VX1945WM LCD Monitor Logo

179 people viewed this question

Ask a Question

Usually answered in minutes!

Top ViewSonic Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18333 Answers

Cindy Wells

Level 3 Expert

4809 Answers

Are you a ViewSonic Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...