-   My TV wont converge using the remote and per the user manual the only way to do this is using the remote. -   gypsy_413
Sep 10, 2008
-   I have Phillips 60" projection - convergence is out and menu screen says to press intelesence button on remote to adjust - I dont have original remote and the tv does not have an intel. button on it. I have been talking to Phillips and they dont have another remote for me to my utter amazement.-   davidalbion
Sony XBR9 40" HDTV isn't level when installed on Sony supplied stand. TV cabinet tilts forward...
(More)
Sony XBR9 40" HDTV isn't level when installed on Sony supplied stand. TV cabinet tilts forward and the right side is lower than the left side. Reinstalling the TV on the stand did not solve the problem.
tv sometimes will cut on, when it is on the sound go's out then it cuts itself off, and sometimes it...
(More)
tv sometimes will cut on, when it is on the sound go's out then it cuts itself off, and sometimes it will not let u cut it off. the modle # is 60p8342
my opnoma h27 projector will not going to turn on any longer and it appers that the unit is not...
(More)
my opnoma h27 projector will not going to turn on any longer and it appers that the unit is not geting any power. I have varifyed that the lamp and power cable is instaled and fucthning properly.
i have a philips 60P8341 tv, my nasta board work fine and my remote works but the sensor is not...
(More)
i have a philips 60P8341 tv, my nasta board work fine and my remote works but the sensor is not responding, what relay or resistor controls that thanks.