Mon imprimante canon ip 6600D marque fout 6A00 foutcode

Hey, the error you are receiving is resolte of the Logic board assy that is faulty and need to be replace. You can order it by Canon using the following code: QM2-
2745

Canon iP6600D and MF4150D are not same

In the US, the driver is available here: http://goo.gl/GxQy4, but I don't see that it's available in French, just Spanish and English from this site. I hope that you can reach this site from your location.

what is error code e000014-0000

error 32

Hello sir; You may go online to down load free user guide.

here is the download page. Amazingly, I found it at www.canon.com:

http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=357&modelid=11864

D'occasion a mon avis ( j'en ai un ) c'est cher ! mieux vaut en acheter un neuf pour quelques euros de plus - au moins il y a une garantie -

Je vous avertis a l' avance que l'encre est SUPER chere ! mais tout depend de vos besoins - le mien marche bien, pratique, mais finalement pour une copie par exemple, a mon avis, mieux vaut aller a la boutique du coin ! (parce que l' encre est si chere !) - mais ca depanne quand on est presse -

Le scanner marche bien - par contre je ne sais toujours pas comment imprimer les photos sur papier photos... Lexmark ne semble pas avoir d'encre speciale photo - je n'ai pas essaye l'encre normale sur papier photo avec cette imprimante, parce que mes essais avec une autre n'ont pas marche ....

J'espere que ca vus donne une idee ....

Drivers and software can be downloaded here.

There is a device that slides back and forth and acts like a window cleaners on the printhead.When this printer is off the printer head can be tilt sidewise freely by hand which allow easy access to the mentioned cleaner sponge tab located below the head in its docking position. The mechanism that drives the sliding squeegie relies on a spring for it to return. The spring sometimes isn't strong enough to over come the gluey ink and so the whole thing jammed up which is probably what the code means - jammed mechanism. Try cleaning this mechanism and carefully moving it.