Question about RCA TruFlat 27F520T 27" TV

4 Answers

Tv problems rca 27f520t

I can't find my control 4 my tv and i can't unlock the fpa?.also how do i go 2 my tv/video to get my direct tv going?

Posted by on

  • 1 more comment 
  • shirley-anne Aug 21, 2008

    The RCA TV will not stay on and the red light for standby is on. It will not let me get to menu to unlock FPA Block Active how it got there I dont know I did not put it there. How can I get my TV to stay on. I have tried every thing except kicking it out the door. This is a big joke! You pay for a TV you can not watch it watch you never again will I buy a RCA and telling all friend and family. RCA use to have a good name and rep, no more.

  • shirley-anne Aug 21, 2008

    Why do I have to pay again to ask one question about your RCA TV. This is still a big joke. All I want is my TV to come on.

  • Anonymous Mar 02, 2009

    same here the fpa lock is on and we lost the original remote.. now a universal wont program at all and cant turn on the tv

×

4 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

A universal remote will not help as you need the tv to be on to sync the remote and the tv. I've tried it.....

Posted on Feb 17, 2009

Oops i meant a Universal control may help

Posted on Aug 19, 2008

I think a univeral control might help.

Posted on Aug 19, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I actually bought A Universal remote from Roses. I actually got it to program. All you do is press the Off/On button on the remote then press the tv button on the remote n then hold down the code search button until a red lite appears once that does that start pushing the channels Up button but take your time once your tv turns on press enter n then u can easily press the tv button to switch to video anytime u need to use it. I know this works cause I have done it.hope this helps

Posted on Feb 19, 2009

  • desire_deseo Feb 19, 2009

    i did it without having my tv on so i have no clue why it worked on mine.well goodluck and sry to hear about your issues.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My rca truflat tv is stuck on fpa lock mode and I don't have the remote. How can I unlock it?


Most RCA and GE TV sets use a four digit code to control the v-chip. The code reset procedure is different depending on the model. Try each method until you find one that works:

1. Hold down MENU on the remote and VOLUME DOWN on the TV it's self at the same time for at least 4 seconds. The set won't say so, but the lock will be unlocked

2. Hold down the 0 on the remote and the VOLUME DOWN buttons on the TV its self at the same time for at least 4 seconds. The set won't say so, but the lock will be unlocked

3. Hold down the MENU button on the front of the TV and the TV button on the remote at the same time for at least 4 seconds.

4. Hold down GO BACK on the remote and MENU on the front of the TV at the same time for at least 4 seconds.

5. Hold down EJECT on the front of the TV and the MENU button on the remote at the same time for at least 4 seconds.
Depending on the model, one of the methods should unlock the V-chip. Now, if desired, you can change the settings on the V-chip by going to the MENU and going to PARENTAL CONTROLS, or on some sets, going to MENU and then going to TV SETUP, then to V-CHIP SET.

Aug 09, 2012 | RCA TruFlat 27F520T 27" TV

1 Answer

How do you turn off the FPA lock on the RCA TRUFLAT TV? I Can't access menu.


Hello
First of all, you must ahve its original remote control to unlock FPA lock. If you have it, go through the folloing steps.
* Hold down Menu button on the remote control, and the Volume Down button on the at the same time for at least 4 seconds. "The set won't say so, but the lock will be released".
** Hold down Zero button on the remote control, and the Volume Down button on the TV. The set won't say so, but the lock will be released.
*** Hold down Menu button on the front of the TV and the TV button on the remote at the same time for at least 4 seconds. The set won't say so, but the lock will be released.

Mar 11, 2012 | RCA TruFlat 27F520T 27" TV

1 Answer

My fca is lock on my tv how do i get it off


Hello
You must have its original remote control handset to unlock the FPA lock. If you haven't one with you now, try to muy a new one, or get it gathered from any of your friends or relatives who owns the same modle RCA tv; just to unlock the FPA lcok of your TV. After unlock, you can use any remote control to operate it. To unlock the FPA lock try the folloing porcedures. One amoung it will surely unlock your TV.
Most RCA TV sets use a four digit code to control the v-chip. The code reset is different depending on the model. Try each number until you find the one that works for you.
  1. Hold down the MENU button on the remote and VOLUME DOWN button on the TV it's self at the same time for at least 4 seconds. The set won't say so, but the lock will be unlocked
  2. Hold down the 0 (zero) button on the remote and the VOLUME DOWN button on the TV itself at the same time for at least 4 seconds. The set won't say so, but the lock will be unlocked
  3. Hold down the MENU button on the front of the TV and the TV button on the remote at the same time for at least 4 seconds. 4- Hold down GO BACK button on the remote and MENU button on the front of the TV at the same time for at least 4 seconds.
Hold down EJECT button on the front of the TV set and the MENU button on the remote at the same time for at least 4 seconds. Depending on the model, one of the methods should unlock the V-chip. Now, if desired, you can change the settings on the V-chip by going to the MENU and going to PARENTAL CONTROLS, or on some sets, going to MENU and then going to TV SETUP, then to V-CHIP SET.
OK.

Jul 05, 2011 | RCA TruFlat 27F520T 27" TV

1 Answer

I have and rca tru flat tv and my FPA lock is on... i have a brighthouse remote that im using on it but i need to know how to turn it off


Hello
Without its original remote control, opening the FPA lock of RCA will be difficult. Just try to get one new remote for this set or jut borrow it from any of your friends or relatives who own the same model set, just to open its FPA lock. After opening lock, you can use your brighthouse remote. You can open the lock with one amoung the following procedure.

Most RCA sets use a four digit code to control the v-chip. The code reset is different depending on the model. Try each number until you find the one that works for you.

1. Hold down the MENU button on the remote and VOLUME DOWN button on the TV it's self at the same time for at least 4 seconds. The set won't say so, but the lock will be unlocked

2. Hold down the 0 (zero) button on the remote and the VOLUME DOWN button on the TV itself at the same time for at least 4 seconds. The set won't say so, but the lock will be unlocked

3. Hold down the MENU button on the front of the TV and the TV button on the remote at the same time for at least 4 seconds. 4- Hold down GO BACK button on the remote and MENU button on the front of the TV at the same time for at least 4 seconds.

Jun 27, 2011 | RCA TruFlat 27F520T 27" TV

1 Answer

Rca 27'' tv set can't acess cable chanels with remote or tv buttons tv was in fpa mode by mistake got out of fpa mode but when i push tv buttons lock on again


Hello
Just unlock its FPA by any one of below mentioned process. Reset the V-Chip settings later and try.
Most RCA TV sets use a four digit code to control the v-chip. The code reset is different depending on the model. Try each number until you find the one that works for you.

1. Hold down the MENU button on the remote and VOLUME DOWN button on the TV it's self at the same time for at least 4 seconds. The set won't say so, but the lock will be unlocked

2. Hold down the 0 (zero) button on the remote and the VOLUME DOWN button on the TV itself at the same time for at least 4 seconds. The set won't say so, but the lock will be unlocked

3. Hold down the MENU button on the front of the TV and the TV button on the remote at the same time for at least 4 seconds. 4- Hold down GO BACK button on the remote and MENU button on the front of the TV at the same time for at least 4 seconds.

4. Hold down EJECT button on the front of the TV set and the MENU button on the remote at the same time for at least 4 seconds. Depending on the model, one of the methods should unlock the V-chip. Now, if desired, you can change the settings on the V-chip by going to the MENU and going to PARENTAL CONTROLS, or on some sets, going to MENU and then going to TV SETUP, then to V-CHIP SET.

Any one amoung the above process will unlock your GE TV. After unlock, you have to do the Vchip-Set.

May 08, 2011 | RCA TruFlat 27F520T 27" TV

2 Answers

I have a TruFlat RCA model # 27F520T have lost original remote and FPA lock is on how do I unlock without original remote? Dish universal remote not working to unlock tv, it will pull up menu but cannot...


Try this -
  1. Press menu for main menu.
  2. Press CH + or CH - to highlight preferences.
  3. Press "OK" to enter preferences submenu.
  4. Press CH + or CH - to high light "FPA"
  5. Press VOL + or VOL - to turn the FPA on or off.
  6. Press MENU repeatedly to exit.
  7. Back to normal
  • FPA stands for Front Panel Lock. It makes it so kids don't push all the buttons on the front of your TV. The power button on the TV will still work and the remote will still function as normal.

Regards, Tony

Apr 30, 2011 | RCA TruFlat 27F520T 27" TV

2 Answers

How do i get the fpa lock off without the original remote?


Hello
It is very difficult to unlock the FPA lock of RCA, without it original remote control. Just try to get it from anyone amoung your friends or relatives; just to open the FPA lock. You can use it after that, with the help of any other univrsal remote control. To open the FPA lock, do one amoung the following till you get the correct process for your TV.

Most RCA TV sets use a four digit code to control the v-chip. The code reset is different depending on the model. Try each number until you find the one that works for you.
  1. Hold down the MENU button on the remote and VOLUME DOWN button on the TV it's self at the same time for at least 4 seconds. The set won't say so, but the lock will be unlocked
  2. Hold down the 0 (zero) button on the remote and the VOLUME DOWN button on the TV itself at the same time for at least 4 seconds. The set won't say so, but the lock will be unlocked
  3. Hold down the MENU button on the front of the TV and the TV button on the remote at the same time for at least 4 seconds. 4- Hold down GO BACK button on the remote and MENU button on the front of the TV at the same time for at least 4 seconds.
  4. Hold down EJECT button on the front of the TV set and the MENU button on the remote at the same time for at least 4 seconds. Depending on the model, one of the methods should unlock the V-chip. Now, if desired, you can change the settings on the V-chip by going to the MENU and going to PARENTAL CONTROLS, or on some sets, going to MENU and then going to TV SETUP, then to V-CHIP SET.
OK.

Mar 29, 2011 | RCA TruFlat 27F520T 27" TV

1 Answer

I accidently locked the fpa how do i unlock it without a remote


Unfortunately, there is really no other way to unlock fpa other than using a remote control.

You can buy any universal remote control and this can be use to unlock fpa.

Good luck.

Sep 20, 2010 | RCA TruFlat 27F520T 27" TV

3 Answers

Fpa lock on my rca tru flat tv


here is my solution. somebody either needs to give me a solution without a remote or fuckin mail me a remote. and if i ever run into these RCA dipshits, ima beat some ***** *** for puttin the damn lock on there in the first place.
signed,
Jay and Silent Bob

Dec 26, 2008 | RCA TruFlat 27F520T 27" TV

Not finding what you are looking for?
RCA TruFlat  27F520T 27" TV Logo

401 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72670 Answers

matt martin
matt martin

Level 3 Expert

1207 Answers

Jaime Hernandez

Level 3 Expert

2296 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...