Question about HP Photosmart 3210 All-In-One InkJet Printer

1 Answer

No HP devices detected. HP Solutions Center will close now.

Hi everyone. Anyone have a solution to the "No HP devices detected. HP solutions Center will close now" problem? I'm still using my HP OJ 7410 All in One via Ad-hoc w/less connection.

Been having this prob since like forever and was hoping someone could throw out a few ideas that might help.

Much appreciated.

scan doesnt work

Posted by on

  • 1 more comment 
  • Anonymous Aug 20, 2008

    Yes, I have the same problem. Error, this device may not be a scanner

    No scanner found....

    It has been more often with Vista.

    I can not even get the solution info from the HP site.

    I try shutting down the whole system....this is about a 50- 50 chance it will work.

    I do a newsletter and this is a big problem.

    ng

  • torifire Oct 02, 2008

    I can't find HPZPML driver in the list, can i download it from somewhere?

  • Anonymous Mar 17, 2014

    hp 7410 no devices detected

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers


HP PSC, Officejet, and Photosmart All-in-Ones - The Error Message 'No HP Devices Detected' Occurs When Opening HP Solution Center (c00762521) Issue No HP devices detected. HP Solutions Center will c - gtabtop.gif When opening HP Solution Center, a message appears that states "No HP Devices Detected ".
Solutiongtabtop.gif

    Solution one: Check connections and status

    1. Check to make sure that the device cables are connected securely at each end.
    2. Make sure the device is turned on and not in an error state. If unsure, turn the unit off and then back on again.
    3. Try to access the device through Solution Center again.
    4. If the device is still not detected, proceed to Solution two.

    Solution two: Check that there is a printer icon in the printer folder

    1. Click Start and then Settings or Control Panel .
    2. Click Printers or Printers and Faxes .
    3. Make sure there is an icon for the printer you are trying to use.
      • If there is no icon and you are connecting via a USB cable, disconnect the cable, and restart the computer. Reinsert the HP software CD and choose Add a device . Connect the unit when prompted by the installer.
      • If there is no icon and it is a wireless connection, run the wireless setup wizard as outlined in the product setup guide, then reinsert the CD and choose Add a device .
      • If there is no icon and it is an Ethernet connection, reinsert the CD and choose Add a device .

    Solution three: Check that the Digital Imaging Monitor is running


      NOTE: If you chose a custom install and did not select HP Digital Imaging Device Functions, the Digital Imaging Monitor will not be installed. Proceed to Solution five.

    1. Press the CTRL , ALT , and Delete keys at the same time to open the Task Manager.
    2. Look to see if HPQTRA08 and HPQSTE08 are running.
    3. If they are not running, restart the computer and then try again.
    4. If they are still not showing in the list, proceed to Solution four.

    Solution four: Check that the HPZPML driver is running

    1. In Windows XP and 2000, click Start , Control Panel , Administrative Services , and then click the Services Icon . Scroll through the list looking for HPZPML to make sure it is set to automatic and that it is running.
    2. In Windows 98/ME, open the Task Manager by pressing CTRL , ALT , and then Delete . The file HPZIPM should be listed.
    3. If the HPZML or HPZIM file are not available, restart the computer. If they still do not show up, proceed to Solution five.

    Solution five: Uninstall and reinstall the software

    1. Insert the software CD into the CD-ROM drive of the computer. The software installer should automatically start.
    2. If the software installer does not automatically start, complete the following steps:
      1. Click Start and then Run .
      2. On the Open line, type D:\SETUP , where D is the letter of the CD-ROM drive.
      3. Click OK .
    3. Click Uninstall on the installer screen. If Uninstall is not an option, the software installation was incomplete. Click Install .
    4. Follow the onscreen instructions until the printer software is completely installed.

Causegtabtop.gif There are several reasons this can happen. The device was not connected during the installation of the software, there is no printer icon in the printer folder, the Digital Imaging Monitor is not running, or the HP service PML driver is not running.

Posted on Aug 27, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No HP devices detected. HP Solutions Center will close now.Need HP 7500 devices.


remove the incorrect 7500 driver and install hp universal driver after install have it search for your printer or manually configure it yourself which ever is easiest for you .please reboot your computer after removal of incorrect driver

Feb 18, 2014 | HP OfficeJet 7410 All-In-One InkJet...

1 Answer

No HP devices detected. HP Solutions Center will close now. I have installed and uninstalled still saying No HP devices detected. HP Solutions Center will close now.


Did you follow the prompts to turn on device and connect the USB cable at the correct time in the installation process? Check your USB connections and cable.

Jan 13, 2011 | Computers & Internet

2 Answers

No HP devices detected. HP Solutions Center will close now.


It might help to uninstall the HP devices through the Device Manager, and then restart the computer. Let the computer try to detect the HP devices and install them and the drivers needed. You might want to have any software discs handy in case you have to reinstall any software that came with the printer, etc.

Feb 12, 2009 | HP Computers & Internet

1 Answer

No HP devices detected. HP Solutions Center will close now.


when it hangs,right click the task bar and open task manager and from the process tab stop the file wrapper.
In device manager click on view and select show hidden devices.
U will see and imaging device keep updating it and

Oct 22, 2008 | Office Equipment & Supplies

1 Answer

No hp devices have been detected. hp solution center will close now


hi petenam,

since you posted this 10/17/08, it's probably no longer an issue for you... but jsut in case someone else is runs acorss the same issue and comes by your post, here are a couple links for future refs (from HP's support site) that might be helpful.

hp solution center and product defaults:
http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00787813&dlc=en&product=441125

no HP devices detected via solution center:
http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00762521&dlc=en&product=441125

no devices messages running Vista:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01529081&cc=us&lc=en&dlc=en&product=441125

general support issues link for your product:
http://h10025.www1.hp.com/ewfrf/wc/product?product=441125&lc=en&cc=us&dlc=en&lang=en&cc=us

-JW50

Oct 17, 2008 | HP Officejet 5610 All-In-One InkJet...

1 Answer

No HP devices detected. HP Solutions Center will close now.


Try a complete uninstall:

Unplug the USB cable from your PC.
[If it is a WinVista Operating System Then in Go to Start> Control Panel> Programs and features delete all the entries you see for HP.( If it promts a restart do not restart now)
Rest all steps wil be same as winXP]

If it is a WindowsXP Operating System then:

Go to Start> Control panel> Add or Remove programs. and delete all the entries you see for HP.( If it promts a restart do not restart now)
Then open my computer> C:drive> Program files> and delete the HP Folder only (not Hewlett Packard)
Then Open C:drive> Program files> Common Files and then delete HP and Hewlett Packard folder.
Then Go to C:Drive> Windows> Temp and empty the temp folder as much as you can.
Then go to Recycle bin and empty recycle bin.
Then Insert the All-In-One CD and cancel the installation process.
Open the content of the CD> and open Util folder> Then CCC> Then click on Uninstall_L4 and follow the on screen process.

After all restart the computer.

And if possible download the software from HP website:

For WinXp:

http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-49256-2&lc=en&dlc=en&cc=us&lang=en&os=228&product=3192753

Then click on download only and then follow the on screen instruction to install the All-In-One, ONLY PLUG THE USB CABLE WHEN PROMPTED DURING INSTALLATION.

Fo WinVista:

http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-49256-2&lc=en&dlc=en&cc=us&lang=en&os=2093&product=3192753

Then click on download only and then follow the on screen instruction to install the All-In-One, ONLY PLUG THE USB CABLE WHEN PROMPTED DURING INSTALLATION.

Let me know if any problem.

Good Luck

Sep 13, 2008 | HP Photosmart C4280 Aio Printer

3 Answers

No HP devices detected. HP Solutions Center will close now.


OK that is something really big well dont have to worry there is another small thing that you can try ...
1. If you have the S/w CD then insert it in the computer open my computer >> Right click on the CD ROM drive and select the option EXPLORE >> there will be an icon that will say Util double left click on that >> You will get a folder that says CCC double left click on it >> you will get a list of different icons over there double left click on UNINSTALL_L2 >> a black window(cmd page) will open up and if u have the USB cable plugged in take it out and after that hit "ENTER" from your keyboard it will uninstall the drivers of the printer that is not getting compatible to the operating system in your computer after it uninstalls click on FINISH>>
computer will restart itself...... after that you need to clear the TEMP folder in your computer
...........if XP click on start>>click on RUN>> type %temp% and hit enter delete everythig that is there after selecting any one of them and then pressing Ctrl+A on your keyboard delete everything and then try and install the S/W....
..........if vista type %temp% and hit enter delete everythig that is there after selecting any one of them and then pressing Ctrl+A on your keyboard delete everything and then try and install the S/W ....

Aug 20, 2008 | HP DeskJet F380 All-In-One Printer

2 Answers

No HP Devices have been detected. Solutions Center will now close.


It may happen if you are using HP Scanjet 5590 scnaner on windows XP. I suggest you to completely uninstlal the scanner software and then install the version 9.0 from the below link. It is the updated version for Vista but work on XP system..

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15179&prodSeriesId=377689&prodNameId=377691&swEnvOID=2093&swLang=8&mode=2&taskId=135&swItem=sj-49436-1

Also, please connect the scanner only when it prompts to do so.
Hope it will work and 5590 scanner works with XP.

Aug 13, 2008 | HP Scanjet 5590 Flatbed Scanner

1 Answer

No HP devices detected. HP Solutions Center will close now.


Unistall the software you have for it now. Go to HP.com and look for Vista drivers for your printer.

May 21, 2008 | HP Photosmart 2710 All-In-One InkJet...

Not finding what you are looking for?
HP Photosmart 3210 All-In-One InkJet Printer Logo

1,931 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Ben Johnson

Level 3 Expert

685 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...