Question about Belkin Wireless G Plus MIMO (F5D9230-4) Router (1010835)

2 Answers

Can't even connect to "setup assistant"

Hey, i just purchased this wireless belkin g+ modem router so i can play cod4 online on my ps3 but i can't even connect to the belkin setup assistant. Im with aol and have 2 modems, BT voyager 205 adsl router but jst use my very basic BT voyager 105 adsl usb modem. i bought this wireless router from my local pc world retailer outlet, only as a member of staff there recomended this, he even had the cheek to say " im sure ull be ables to set it up easy enough" :( lol if i wanted a rubixs cube i'd buy one, but as it is im longing to play cod4 online so any help on this matter would be very much appreciated.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

Are you setting it up for wifi or wired connection?
you stated you have 2 modems?
removed the secondary modem and check if the first modem is able to connect.. If yes well proceed but if not it means the modem is the cause y you are unable to connect..

Posted on May 02, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 86 Answers

It sounds like you need to keep using your usb modem to connect to the internet. then setup internet sharing on the computer and connect the wireless router to the network plug on the computer.....

then basically you are sharing the internet to the plug on the back of the pc into the router and then wirelessly out to the network and PS3

Posted on Aug 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Want to use belkin n150 as wireless access point to ps3 and have no internet


Are you saying you are trying to setup a wireless connection, even though you don't have internet? Impossible!


Normal setup - Connect the ISP modem to main uplink port on router. Then connect pc to any other port. Done!

Now connect PS3 as normal. Look for the Belkin network SSID and Key. There is a small piece of paper underneath the router with default ID and password key. It is also noted on Web Admin page. You can always use the reset to clear any custom settings.

Access point option is only for unsecured connection. Do not use.

Nov 15, 2012 | Routers

1 Answer

I have a belkin connect n150. and i hav my ipod touch connected to it via wireless and my computer and xbox 360 via wired and i can connect to the internet on my ipod and computer and xbox. but when i try...


PS3 And XBOX :: BELKIN



Step 1:Connect Modem - Router - Computer (Wired)

Step 2:Open Router Setup by typing http://192.168.2.1 on the address bar of internet explorer

Step 3:On the Left click firewall

Step 4:Leave the Password blank and click submit

Step 5:Disable it and click apply changes

Step 6:Scan and connect in the Xbox/PS3/Wii

Step 7: Get the IP Address of the Xbox/PS3/Wii

Step 8:Open Router Setup in the Computer

Step 9:On the left under Firewall Click DMZ

Step 10:Enable the IP Address of the Xbox/PS3/Wii in it

Step 11:Click Apply Changes

Step 13:On the left Under Utilities click System settings

Step 14:Scroll down to the bottom

Step 15:Enable UPnP

Step 16:Click apply changes

Step 17:Test the connection ,Check the NAT

If working then let me know

======================================...
If it is still not working

Open Router setup

At the middle Under internet settings check the WAN IP

IF it starts with 192.168. or 172.16 Then you will have to contact your internet service and ask them to bridge the modem


Regards
TOM

Jan 15, 2011 | Belkin Connect N150 Wireless N Router

1 Answer

Can the belkin n150 be used for the Ps3 to play online?


PS3 And XBOX :: BELKIN



Step 1:Connect Modem - Router - Computer (Wired)

Step 2:Open Router Setup by typing http://192.168.2.1 on the address bar of internet explorer

Step 3:On the Left click firewall

Step 4:Leave the Password blank and click submit

Step 5:Disable it and click apply changes

Step 6:Scan and connect in the Xbox/PS3/Wii

Step 7: Get the IP Address of the Xbox/PS3/Wii

Step 8:Open Router Setup in the Computer

Step 9:On the left under Firewall Click DMZ

Step 10:Enable the IP Address of the Xbox/PS3/Wii in it

Step 11:Click Apply Changes

Step 13:On the left Under Utilities click System settings

Step 14:Scroll down to the bottom

Step 15:Enable UPnP

Step 16:Click apply changes

Step 17:Test the connection ,Check the NAT

If working then let me know

======================================...
If it is still not working

Open Router setup

At the middle Under internet settings check the WAN IP

IF it starts with 192.168. or 172.16 Then you will have to contact your internet service and ask them to bridge the modem


Regards
TOM

Jan 02, 2011 | Belkin Connect N150 Wireless Router...

1 Answer

I have a belkin f5d8235-4 router and I am trying to get my nat type to 1 or 2 so i can play online on my playstation 3


PS3 And XBOX :: BELKIN



Step 1:Connect Modem - Router - Computer (Wired)

Step 2:Open Router Setup by typing http://192.168.2.1 on the address bar of internet explorer

Step 3:On the Left click firewall

Step 4:Leave the Password blank and click submit

Step 5:Disable it and click apply changes

Step 6:Scan and connect in the Xbox/PS3/Wii

Step 7: Get the IP Address of the Xbox/PS3/Wii

Step 8:Open Router Setup in the Computer

Step 9:On the left under Firewall Click DMZ

Step 10:Enable the IP Address of the Xbox/PS3/Wii in it

Step 11:Click Apply Changes

Step 13:On the left Under Utilities click System settings

Step 14:Scroll down to the bottom

Step 15:Enable UPnP

Step 16:Click apply changes

Step 17:Test the connection ,Check the NAT

If working then let me know

======================================...
If it is still not working

Open Router setup

At the middle Under internet settings check the WAN IP

IF it starts with 192.168. or 172.16 Then you will have to contact your internet service and ask them to bridge the modem


Regards
TOM

Dec 23, 2010 | Belkin (F5D8231-4) Wireless Router...

1 Answer

Ps3 and Belkin surf router - I can play online with the ps3 but when i try to join with friends to form a party (Black ops) it will not allow me to do so. any suggestions? i did not have this problem...


PS3 And XBOX :: BELKIN



Step 1:Connect Modem - Router - Computer (Wired)

Step 2:Open Router Setup by typing http://192.168.2.1 on the address bar of internet explorer

Step 3:On the Left click firewall

Step 4:Leave the Password blank and click submit

Step 5:Disable it and click apply changes

Step 6:Scan and connect in the Xbox/PS3/Wii

Step 7: Get the IP Address of the Xbox/PS3/Wii

Step 8:Open Router Setup in the Computer

Step 9:On the left under Firewall Click DMZ

Step 10:Enable the IP Address of the Xbox/PS3/Wii in it

Step 11:Click Apply Changes

Step 13:On the left Under Utilities click System settings

Step 14:Scroll down to the bottom

Step 15:Enable UPnP

Step 16:Click apply changes

Step 17:Test the connection ,Check the NAT

If working then let me know

======================================...
If it is still not working

Open Router setup

At the middle Under internet settings check the WAN IP

IF it starts with 192.168. or 172.16 Then you will have to contact your internet service and ask them to bridge the modem

Dec 13, 2010 | Belkin Wireless Surf Router (F7D2301)

1 Answer

I have my xbox hooked up the router to play online but quite a few of my friends cant link up with me during the games. on the main screen it says my NAT type is moderate and that i may have connection...


PS3 And XBOX :: BELKIN



Step 1:Connect Modem - Router - Computer (Wired)

Step 2:Open Router Setup by typing http://192.168.2.1 on the address bar of internet explorer

Step 3:On the Left click firewall

Step 4:Leave the Password blank and click submit

Step 5:Disable it and click apply changes

Step 6:Scan and connect in the Xbox/PS3/Wii

Step 7: Get the IP Address of the Xbox/PS3/Wii

Step 8:Open Router Setup in the Computer

Step 9:On the left under Firewall Click DMZ

Step 10:Enable the IP Address of the Xbox/PS3/Wii in it

Step 11:Click Apply Changes

Step 13:On the left Under Utilities click System settings

Step 14:Scroll down to the bottom

Step 15:Enable UPnP

Step 16:Click apply changes

Step 17:Test the connection ,Check the NAT

If working then let me know

==============================================
If it is still not working

Open Router setup

At the middle Under internet settings check the WAN IP

IF it starts with 192.168. or 172.16 Then you will have to contact your internet service and ask them to bridge the modem

Sep 28, 2010 | Belkin Wireless G Plus MIMO (F5D9230-4)...

1 Answer

I play on xbox live via wireless setup to a Belkin 3950 router. My comp runs window 7. Whenever i try to play on my xbox it tells me i need to switch my NAT type to open. I can't figure out were my NAT...


PS3 And XBOX :: BELKIN



Step 1:Connect Modem - Router - Computer (Wired)

Step 2:Open Router Setup by typing http://192.168.2.1 on the ad

Sep 25, 2010 | Routers

1 Answer

I have a Belkin N model F5D8236-4v1, and while I can connect with my Xbox 360, it will only stay connected for an average of about 10-15 minutes before disconnecting. It will immediately allow me to...


PS3 And XBOX :: BELKIN



Step 1:Connect Modem - Router - Computer (Wired)

Step 2:Open Router Setup by typing http://192.168.2.1 on the address bar of internet explorer

Step 3:On the Left click firewall

Step 4:Leave the Password blank and click submit

Step 5:Disable it and click apply changes

Step 6:Scan and connect in the Xbox/PS3/Wii

Step 7: Get the IP Address of the Xbox/PS3/Wii

Step 8:Open Router Setup in the Computer

Step 9:On the left under Firewall Click DMZ

Step 10:Enable the IP Address of the Xbox/PS3/Wii in it

Step 11:Click Apply Changes

Step 13:On the left Under Utilities click System settings

Step 14:Scroll down to the bottom

Step 15:Enable UPnP

Step 16:Click apply changes

Step 17:Test the connection ,Check the NAT

If working then let me know

Goto : my blog for more information about belkin routers (Page is still under construction )

==============================================
If it is still not working

Open Router setup

At the middle Under internet settings check the WAN IP

IF it starts with 192.168. or 172.16 Then you will have to contact your internet service and ask them to bridge the modem

Sep 23, 2010 | Belkin Routers

1 Answer

Just bought a belkin modem router but cant get online


You can Open the Router Setup And configure the connection Manually

If you can tell the name of your internet service provider then i may be able to help you

Send it at warrierrakesh@ymail.com

Jan 04, 2010 | Belkin (F5D7231-4) Wireless Router

1 Answer

I have a Belkin Wireless router and I have a PS3


Actually you don't need to forward ports when playing online games. The router should automatically locate the ports for the game because it has UPnP function. Here's what you can do. Disable the port forwarding and DMZ that you set on the router. Look for the UPnP function of the router and disable, Save it. Enable it again, then save. Now power cycle your router. If you have Static IP on the PS3 network settings, try to set it first to automatic IP and automatic DNS.

Hope that helps.

Sep 23, 2009 | Belkin N Wireless Modem-Router F5D8633au4A

Not finding what you are looking for?
Belkin Wireless G Plus MIMO (F5D9230-4) Router (1010835) Logo

242 people viewed this question

Ask a Question

Usually answered in minutes!

Top Belkin Routers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

steve morris
steve morris

Level 3 Expert

1673 Answers

Christopher Thrash

Level 3 Expert

425 Answers

Are you a Belkin Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...