Fuji FinePix A350; Can not get date stamped on digital pictures. When I go to setting and select "with date" the Menu/OK button does not do anything (acts like it is locked out.

Press the MENU/OK button. Press cursor-left, then select the wrench-SET icon. Press cursor-right, then select the DATE/TIME command.

If you need a manual, you may download a copy here.

The Date/Time command is in the setup menu. See page 53 of this manual.

Hello and Welcome to FixYa!

If you have forgotten to set date and time then you can also set date and time after turned on the camera. to set date and time follow the given instructions:

• Press the Menu button on the rear of the device, then choose Set with left or right button, Then go to Setup menu.
  
• Select Option followed by time icon. This brings up the date display. The display blinks as it has not yet been set.
• With the help of Right or left buttons select Year, Month, Day,Hour or Minute. Then press Menu/Ok button after the settings completed. Now every picture captured with the Fujifilm FinePix F460 will save the date and time to the pictures

I hope this solution helps you
For further assistance, I am here to help.
Thanks and Keep Visiting FixYa

The Fuji FinePix S1000FD camera supports time stamping only when printing pictures via USB with a printer that supports PictBridge. Otherwise, you will need to download the images and use an application such as "Visua Photo Time Stamp."

To print with PictBridge,

1. Connect the camera to the printer and make sure the printer is on.
2. Press the right-pointing arrow and hold for a second or until the USB logo is displayed on the camera
3. Press the DISP/BACK button on the camera
4. On the menu, select the PRINT WITH DATE option and press MENU/OK.
5. Press MENU/OK again to start printing.

Hello and Welcome
To set the date and time stamp on pictures, Follow the given instructions:

• Power on the FUJIFILM FinePix J28 digital camera and wait for the hardware to finish running through its start mode
• Press the "Menu" button on the rear of the device, then choose "Setup."
• Select "Options," followed by "Date." This brings up the date display. The display blinks as it has not yet been set.

• Push the top button on the control display to advance the first number in the date. Once you have the correct number selected press "Enter" and repeat the process for all the numbers. When the date is set the time information appears. Follow the same procedure to set the time. Press "Enter" to accept the changes. Now every picture captured with the FUJIFILM FinePix J28 will save the date and time to the pictures

For further assistance, I am here to help.
Thanks and Keep Visiting FixYa

The camera will not deface your pictures by scrawling a set of digits across it. You can have the date appear when you print the pictures. Please refer to the documentation for whatever program you're using to print.

If you're printing from the camera using a PictBridge-compatible printer, you can set it to print the date by selecting PRINT ORDER (DPOF) from the Playback menu and then selecting "WITH DATE". It's detailed in the "Printing Pictures via USB" section of the manual (page 43 in my copy). If you need a manual, you can download one at
http://www.fujifilm.com/support/digital_cameras/manuals/pdf/index/j/finepix_j100_j120_j110w_j150w_manual_01.pdf

Press MENU/OK to display the menu. Highlight the left tab. Select "Set". Use up/down to select "DATE/TIME" and press right.

This is on page 83 in my edition of the manual.

You can't get date on the pictures, when viewing them on the screen og on the computer. You can print pictures with date printed on them. Press Menu/OK while viewing the picture on the camera. Select DPOF, select With date. You need to do this with every single picture you want date on. It also requires your printer to be DPOF compatible.

Hello,

If this a new memory card, you can try to FORMAT it. Formatting will erase any contents on the card.

Use the right arrow and select the "options" menu. Press the up arrow to select "set-up", press "menu/ok". Select "format" on the menu using the down arrow. Highlight OK on the screen click "menu/ok".

select in menu options then choose show date...