Question about Projection Televisions

1 Answer

Reply the tv will turn back on for about the same amount of time if i unplug it and then plug it back in.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 44 Answers

If you have the model number I can look into this further, but in my experience it could be relating to a few things depending on what you have. Can you verify the model for me? And this is a rear projection TV?

Posted on Aug 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have toshiba 50hm67 replaced lamp...tv worked, then quit working again, and giving blinking yellow lamp error light when turn on...after a few moments tv tries to turn off and back on


OK. I have this same issue. I replaced my bulb a month or so ago. TV worked fine. Then one morning I turned it on and it was on for a good while, till it went to a black screen w/ sound only. Lights were going through the reboot process as designed for 8 attempts before it went to the solid red light. From the red light, if I unplug and plug back in, the tv will come on for a given amount of time, which varies, and then cut to the black screen. A repairman told me that it sounds like the digital board is bad. He wanted $150 for the board and $100 labor. I cannot find anywhere where the board would be located or where I can purchase a replacement.

Jun 15, 2011 | Toshiba 50HM67 50" HDTV

1 Answer

Good evening I have a PT-61G53W projection TV and 2 days ago I came home duty on board my ship sat down & clicked on the TV it clicked & that was it no picture! I unplugged from surge protector...


You have short somewhere for sure.....I would guess possibly the convergence board is in need of repair..The majority of projection TVs will have this problem. Any and all brands have convergence problems...they give off a tremendous amount of heat which is the electronic enemy!

Jan 07, 2010 | Panasonic PT-61G53 61 in. Rear Projection...

2 Answers

The Timer, Lamp and Red standby lights are blinking. The TV turns on for only 10 seconds then turns off.


Hi there

Please provide the make and model.

Please do not rate this reply or your reply will not be returned to me. Thanks.

Aug 19, 2009 | Projection Televisions

1 Answer

2 yr old polaroid tv won't turn on leave on 10 min. plug and unplug then sound comes on leave on 10 minutes plug if polaroid comes up picture will come up.


There is a slight possibility that the ballast is going out, because after a while you do get the image, and the Tv is not that old, which I'm guessing you haven't replaced the l;amp yet, because it's not even time to do it, unless you the Tv is on for a great amount of hours, if so replace the lamp first.

Jun 30, 2009 | Projection Televisions

1 Answer

Green (power on) light continuously blinking/set won't turn on


This set was designed in such a way that when it is unplugged and plugged back in the LED will blink for around 90 seconds and then stop. During that time you cannot turn the set on. This is the amount of time it takes for the Digital Module to boot up. These units have a problem with some capacitors going bad in the Digital Module and when that happens the LED never stops blinking. You need to contact a qualified repair shop to get it repaired. I have repaired many and the cost is around $250 to $350 depending on where you live. That set is well worth the repair cost.

Jun 02, 2009 | Mitsubishi WS-65613 65" Rear Projection...

1 Answer

Screen turns blue then shuts off.


I already replied but once again..
Symptom shows Blue CRT (picture tube) in your TV might defective and need to be replaced. Its high tech repair issue, so contact tv tech person if you don't have enough knowledge about tv repair.

Sep 05, 2008 | Toshiba 51H84 51" Rear Projection...

2 Answers

My misubishi diognostic


unplug the convergence yoke plugs all three and try powering up the set. then let me know if it powerd up. Please reply to this same post when responding.

Jul 27, 2008 | Mitsubishi WS-65513 65" Rear Projection...

3 Answers

Toshiba TN55X81 Wont turn on but I hear clicking


Pull the three connectors to the yokes on the convergence board. If the set powers up, it's a good chance the STK392-110's need to be replaced. I fixed one today, and it has been running for 6 hours now.
-Dan

Jun 15, 2008 | Toshiba TN55X81 55" Rear Projection...

1 Answer

Sony - Projector TV won't turn


Sony TV;s will give a service code, count the blinks, eg; 2-6, light will blink X amount of times, hesitate & blink again so many times. Count and report back but, I would recomend to unplug the TV's power cord, to reset the TV's system. Unplug for at least 3 minutes. I hope this was helpful.

Jun 11, 2008 | Projection Televisions

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60769 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...