Question about Eagle FishElite 320 GPS Receiver

Open Question

Eagle Sea Finder 480DF

Everything on screen works except the depth is blinking 0.0 depth

Posted by on

  • Anonymous Oct 05, 2008

    depth blinking

×

4 Suggested Answers

  • 3 Answers

SOURCE: rl70c raymarine depth finder problem

fish finder transducer needs to be on before you boot your system. check your hsb cables and termination

Posted on Oct 13, 2008

  • 1 Answer

SOURCE: 4150sx finder erratic depth

I had the same problem last time I was out in shallow water (in less than 2 metres of water) and I suspect that the problem was weed wrapped around the transducer but won't know for sure until I take it out on the water again. I had another problem re water temp which I'll enter separately.

Posted on Apr 24, 2009

  • 1 Answer

SOURCE: Eagle 640c Fish Finder dosen't read corectly.

I had the same problem and got the transducer changed. It now works perfectly. That could be the problem you are having... bad transducer.

Posted on Jul 22, 2009

TechnoMarine
  • 132 Answers

SOURCE: sea talk failure

Remove all wiring from 4000 head, hook up only 12V, if seatalk fail continues, it is the head. if seatalk fail goes away, hook in instruments one by one until the bad head is found. Seatalk is 12V red, Ground Screen(bare wire) and Data yellow (pulsing voltage). good luck 847-746-0100 John Barry

Posted on Jan 26, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a eagle z-5000 lcg recorder that came with my boat, but don't have the power cord or the line that goes into the water. can i get a parts list that I can order them through.


yes, I have the part you need for your Eagle Z 5000 lcg recorder. I have the power cord, transducer with over 25 ft. of cord and complete with a fish finder Z 5000 of which depth finder does not work. You can have it all for $75.00 plus shipping Please contact me by email steve.lloyd@yahoo.com
Thank you

Jul 14, 2011 | GPS Devices

1 Answer

I need a user manual for a "sea ranger 40/40" echo alarm depth finder made by sea ranger marine electronics red bank, new jersey


Hi!

Unfortunately Sea Ranger electronics went belly-up some time ago.
The last I'd heard, it was bought by Uniden.

Sorry for not being able to be of more assistance to you.

Dec 24, 2010 | GPS Devices

1 Answer

Built in transducer is not picking up/transferring depth to graph


I havew a Minn Kota trolling motor on a Z21 Ranger. Minn Kota has a built in (puck type) transducer on the motor. I have a lowrance 135x on the front. The lowrance will read the temp but will blink the depth. I switched out the depth finder with another 135x with the same results. I have a 522c gps unit networked together and mounted on the console that works fine. Any suggestions on the problem with the 135x?

Jul 27, 2009 | Minn Kota Maxxum 70 Universal Motor/Sonar...

1 Answer

Eagle 640c Fish Finder dosen't read corectly.


I had the same problem and got the transducer changed. It now works perfectly. That could be the problem you are having... bad transducer.

May 17, 2009 | Eagle Intellimap 640c Marine GPS GPS...

1 Answer

Problem with navman 4150 fish finder


I installed my Navman 4150 depth finder along with the Navman GPS unit when I purchased my Bayliner Trophy 20Ft. Offshore model. Everything was ok for one year and it has been downhill since then. Losing signal, unbelievable high depth ranges, blank periods, etc.. I now can't even get a reading tieded up at the dock. I am now giving up and shoping for a quality unit.. Cape Disappointment.........

Jan 07, 2009 | Navman Fish 4150sx GPS Receiver

1 Answer

Portable Humminbird 565


I've got the 565 and everything will be working fine and then the depth
finder or bottom of the lake goes to 6ft. Have to shut it off for an hour and it works for a wile but it always goes back to doing it
anything I can do?
Thanks Jeff

Aug 24, 2008 | Humminbird GPS Devices

1 Answer

Sea talk failure


Remove all wiring from 4000 head, hook up only 12V, if seatalk fail continues, it is the head. if seatalk fail goes away, hook in instruments one by one until the bad head is found. Seatalk is 12V red, Ground Screen(bare wire) and Data yellow (pulsing voltage). good luck 847-746-0100 John Barry

Jul 14, 2008 | Raymarine A65 Combo GPS...

1 Answer

Rl70c raymarine depth finder problem


fish finder transducer needs to be on before you boot your system. check your hsb cables and termination

Jul 12, 2008 | Raymarine RL70CRC GPS Receiver

1 Answer

Depth dosnt work on egle fish mark 320


MY depth finder blinks 0.0 depth all the time

May 11, 2008 | Eagle FishElite 320 GPS Receiver

Not finding what you are looking for?
Eagle FishElite 320 GPS Receiver Logo

Related Topics:

111 people viewed this question

Ask a Question

Usually answered in minutes!

Top Eagle GPS Devices Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you an Eagle GPS Device Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...