Paper picking problem in hp psc1315 - HP PSC 1315 All-In-One InkJet Printer

http://h10025.www1.hp.com/ewfrf/wc/product?product=374568&lc=en&cc=us&dlc=en&lang=en&cc=us

The above is the support page for the psc1315 printer.

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02114788&tmp_task=solveCategory&lc=en&dlc=en&cc=us&lang=en&product=374568

The print diagnostic utility is available on the above link.

Otherwise, if a solution is not found, the printer may need service at the following link:

http://h20465.www2.hp.com/GPL/search.aspx?SearchType=SSP&country_code=us&language_code=en&jumpid=hpr_R1002_USEN

Hi,


To be able to understand the problem, you should give extra info about the lights.
Please find the information below about the status lights that provide information about error conditions of your printer. But first you need to install the driver for your operating system. The drivers are necessary to print documents and scan images. These drivers must be installed to use the print and scan features.


If the On light, Check Print Cartridge light, Check Paper light, and Start Copy, Black and Start Copy, Color lights are all flashing, do the following:

1 Verify that the front-panel overlay is attached to the HP PSC.
2 Turn your HP PSC off and on by disconnecting the power cord and reconnecting.



Problem 1: “ON” light is on, “check paper” light is blinking and “check print cartridge light” is off .

Explanation 1: The paper tray is empty, the HP psc has a paper jam, or the paper size setting and paper in paper tray are not the same.

Solution 1:
• Load paper, or remove thepaper jam.
• Change paper in paper tray to correct size.
• Change paper size on the computer software.
Then press On/ Resume to continue.

NOT : PLS SEE THE NEXT MESSAGE. CONTINUED AS THE COMMENTS BELOW:

1) Check your printers ink levels.
2) Make sure there is no jammed paper in the printer.
3) Contact your printers manufacturers website. You can speak to them live if there online. Explain to them the issue.

I'm not sure which parts you're referring to, but here's a guide to normal paper jam procedures, and here's a link to an online manual....
Without more specific info, I'm not sure where to point you, though if you contact HP support they can access an exploded diagram of parts for your printer that may help you....

I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread.
If I've managed to answer your question or solve a problem, please take just a moment to rate this post....thanks!

Download from here, just pick your OS:

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=374568&lc=en&cc=us&dlc=en&lang=en&cc=us

Click on this link or copy and paste the complete link into your browser.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe


I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Hi vikram70
here you go select your o/s psc1315 and get software and drivers that are compatible with your product and the operating system.

Follow the instructions on the user manual below:


HP PSC 1310 series all-in-one - (English) User Guide

it might but if it does not work call hp and order a new disk.

need driver

I have an HP PSC1315 which is virtually the same printer. I actually created my own template where 10 business cards are printed as if it were one sheet of paper(like a poster). Of course you you can't select how many cards print, or which card to start on, but at least I get 10 perfectly centered cards.