Question about Kitchen Ranges

1 Answer

My Tricity Sovereign electic cooker, the oven and grill have stopped working but the hobs are working fine. What would be the cause of this?

Posted by on

  • mehramax Nov 03, 2008

    my tricity soveriegn cooker's oven has stopped working and lights keep flashing on the panel.the hobs continue to work...for now!

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

YOU HAVE HAD A POWER CUT AND IT NEEDS TO BE RESET,I CANT REMEMBER WHICH 2 BUTTONS YOU NEED TO PRESS ON THE CONTROL PANEL BUT JUST TRY DIFF COMBOS

Posted on Dec 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hobs all working oven not working


Hob stopped working, oven still fine on electric cooker, any ideas ...

forums.moneysavingexpert.com/showthread.p...

MoneySavingExpert.comDec 25, 2010 - From this point, we'll assume that you are happy to receive all .... have a "problem" that covers the hob not working but the oven doing so. Gas Hob Ignition Not Working!
May 22, 2007
Oven not heating - Please help
Oct 14, 2006
Oven won't get hot - help please
Aug 24, 2006
More results from forums.moneysavingexpert.com

How to Diagnose a Fault With an Electric Hob ' eSpares

www.espares.co.uk > Advice Centre

Jan 01, 2016 | Logik LFTC60W12 White 60 cm Electric...

1 Answer

Main OvenElement not heating up when replaced


PLEASE SOMEONE HELP ME.

1. I CANT FIND EMAILS SENT TO MY INBOX AFTER FEW MINUTES OR HOURS OF READING THEM ESPECIALLY IMPORTANT EMAILS. BUT I WILL ONLY FIND THE REPLIES I SENT ON THE SUBJECT MATTER BUT NOT THE ORIGINAL EMAIL WHICH THE PERSON SENT TO ME MAKING IT DIFFICULT TO FOLLOW UP ON ISSUES. THIS HAS BEEN GOING ON NOW FOR ABOUT FIVE MONTHS AND I THOUGHT IT WILL JUST READJUST ITSELF TO THE DEFAULT SETTING. I AM UNABLE TO WORK EFFECTIVELY IN THE OFFICE AS I CANNOT REFERENCE MAILS SENT TO ME AGAIN TO KEEP A LINE OF CONVERSATION GOING. COULD IT BE THAT THERE IS A BUG / PHISHING STUFF SET ON MY ACCOUNT OR THERE IS SOMETHING I MAY HAVE ENABLED OR DISABLED UNCONSCIOUSLY THAT IS CAUSING THIS

Dec 19, 2013 | Tricity Bendix SE454 Electric Kitchen...

1 Answer

I have a Belling 335 everything still works apart from the actual oven part? What could this be and is it fixable??


check your timer,if it has a programm set(by accident)the oven will not work until this has been cleared,if your not to sure then switch cooker off at the cookers main switch on the wall.leave for a few mins and switch back on this should clear any set programm,good luck.

Nov 13, 2012 | Belling 335 Electric Kitchen Range

1 Answer

I have a belling 335 and both the oven and rear left hob ring have stopped working. what is likely to be the problem?


The thermal fuse inside rear is faulty. The grill also has it's own thermal fuse so make sure you change the correct one.

Sep 06, 2012 | Belling 335 Electric Kitchen Range

1 Answer

Tricity Sovereign keeps overheating


Sounds like the RTD could be going bad. An RTD is a resistive temperature device which means it changes resitance over temp. If that is bad it will cause the oven to go into thermal runaway. A secondary option woul be that the oven controller circuitry is bad. You could replace the RTD yourself however the oven controller would require either a repair by a technician or replacement by the manufacturer. If it is under warranty I suggest asking them first.

Dec 14, 2009 | Kitchen Ranges

2 Answers

Beko dc543 oven and top left top right bottom right hobs not working bottom left hob is working and so is grill i have checked all terminal wires and all ok i had this problem before under...


I AM NOT AN ELECTRICIAN ! But i have had the same problem of the oven and the back right ring not working and have found the cause of this. For some reason there is a thermal fuse running inline on a live wire inside the cooker if you feel competent yourself in replacing this fuse you will save a good deal of money on call out fees, here is how to do it. SAFETY is the crucial, First of all isolate the power source to the cooker, pull out cooker so you can get access to the back of the cooker, remove the 9 screws ( i think there is 9) to remove the back plate from the cooker, this is quite heavy because there is a small block of concrete fastened to the bottom left hand side of the back plate, looking at the inside of the cooker on the right hand side you will see a white wire which has been secured via a small screwed clip, this wire has a transparent sleeve covering the thermal fuse, remove the sleeve by sliding it up or down the wire, check the fuse by with a meter just to be sure, if it is blown cut the fuse out. replace fuse the same way it was fitted. replace the sleeve and fit the back on the cooker SAFETY FIRST switch on power and try oven and back ring, mine works fine. like i said at the start i am not an electrician, but i can not understand why there is a thermal fuse running inline to the oven which is linked the back right hob. all the best folks Hobbo from Chess.

Mar 23, 2009 | Jenn-Air JES9860 Electric Kitchen Range

Not finding what you are looking for?
Kitchen Ranges Logo

Related Topics:

439 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Electrolux
Electrolux

Level 3 Expert

4342 Answers

Are you a Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...