Question about Maytag Neptune MAH5500B Front Load Washer

1 Answer

Neptune Washer MAH-3

Door will not latch closed

Posted by on

  • Anonymous Apr 10, 2009

    The fabric softner does not empty. The tray fills up with water and does not empty.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 639 Answers

Dear kim,
ngfam at you service!




This sounds like it will only fixed by service then you will be happy again!!

Yes sounds like you need service!
Call A&E Factory Service /They service nation wide
And are available 24/7 for making appointments!

If the appliance is 10 years old or more,it may make sense not to invest any money to fix it!
Happy to assist you,
Neil

Posted on Aug 26, 2008

2 Suggested Answers

ngfam1
  • 639 Answers

SOURCE: Maytag Neptune MAH-3 front load wasehr

Dear kimlrgh
,
ngfam at you service!

This sounds like it will only fixed by service then you will be happy again!!

Yes sounds like you need service!
Call A&E Factory Service /They service nation wide
And are available 24/7 for making appointments!

If the appliance is 10 years old or more,it may make sense not to invest any money to fix it!
Happy to assist you,
Neil

Posted on Aug 26, 2008

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Showa error code d5 and won't do anthing at all??


d5 is a door lock error code,more than likely a bad door latch it's an easy repair,here is a link to the Neptune repair manual this the Mah 3000 but they all come apart the same way the only real difference was in the control panel and the door latch in yours uses a solenoid to lock instead of a wax motor

http://www.applianceblog.com/manuals/MaytagNeptunenew.pdf Good luck, I hope this helped
Please rate me, Thanks

Dec 25, 2009 | Maytag Neptune MAH5500B Front Load Washer

2 Answers

On my Maytag Neptune MAH-3, the water is running non-stop


check plastic hose out side of tub to pressure switch
if ok replace pressure switch

Oct 12, 2009 | Maytag Neptune Washer

2 Answers

Error code d5 on front load neptune washer


d5 is a door lock error code,more than likely a bad door latch it's an easy repair,here is a link to the Neptune repair manual this the Mah 3000 but they all come apart the same way the only real difference was in the control panel and the door latch in yours uses a solenoid to lock instead of a wax motor

http://www.applianceblog.com/manuals/MaytagNeptunenew.pdf

Sep 13, 2009 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

I have a neptune MAH-1 washer, the door locked


if you remove the back console, youll be able to see the "machine controlboard". appro. ha;f way down and favoring the left side of circuit board youll notice a small blue relay cover(MAYBE 3/8"X1/2" in size. well just above that relay cover you see a resistor that will be physically burnt out( a real noticable burn ring around it) if this is the case you need to replace the board as well as the "wax motor" within the latch assy.

Jun 15, 2009 | Maytag Neptune Washer

1 Answer

Maytag Neptune MAH-3 front load wasehr


Dear kimlrgh
,
ngfam at you service!

This sounds like it will only fixed by service then you will be happy again!!

Yes sounds like you need service!
Call A&E Factory Service /They service nation wide
And are available 24/7 for making appointments!

If the appliance is 10 years old or more,it may make sense not to invest any money to fix it!
Happy to assist you,
Neil

Aug 17, 2008 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

Won't spin


you need to replace the wax motor door latch as i have read all of them have to be updated due to defect,if you need more info let me know-mike

Jun 09, 2008 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

Maytag neptune won;t rinse


Check latch mechanism for alignment. Often operation of machine loosens latch mechanism causing internal switch for "door open (or ajar)" preventing rinse or spin cycle. Opening and closing door presses latch mechanism closing internal switch allowing for continue processing to rinse or spin cycles.

Mar 24, 2008 | Maytag Neptune MAH5500B Front Load Washer

Not finding what you are looking for?
Maytag Neptune MAH5500B Front Load Washer Logo

Related Topics:

118 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Bill Long

Level 3 Expert

587 Answers

John Tripp
John Tripp

Level 3 Expert

4654 Answers

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...