Question about JVC Audio & Video Receivers

7 Answers

NEED TO SET UP COMCAST REMOTE TO CONTROL JVC UX-D66 AUDIO COMPONENT; COMCAST REMOTE REQUIRES 5 DIGIT CODE

Posted by on

  • 5 more comments 
  • David Schwartz
    David Schwartz Aug 17, 2008

    Five zeros doesn't work; there are several two and three digit codes that I've found but they are not valid for the comcast remote; any other ideas??

  • David Schwartz
    David Schwartz Aug 17, 2008

    Thanks, but the four digit codes do not work; the PDF file you linked is similar to the paper directions i have that came with the remote, except that mine requires 5 instead of four digits. One of the set up codes they list for JVC is 30074, which has not worked.

  • David Schwartz
    David Schwartz Aug 18, 2008

    see previous notes

  • David Schwartz
    David Schwartz Aug 18, 2008

    Model # of remote not listed; came with Motorola DCH70 box

  • David Schwartz
    David Schwartz Aug 18, 2008

    Need five digit code; not four digit described in your link

  • David Schwartz
    David Schwartz Aug 18, 2008

    00002 did not work

  • David Schwartz
    David Schwartz Aug 19, 2008

    tried 3 in front of codes but no success.

×

7 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,512 Answers

Hi david


If the code you have entered from the Comcast user manual does not work, you may have to go through the process of "searching" for your code as detailed in the user manual. If this fails, then there may not be a code for the JVC unit you are trying to use. Nothing will solve this problem. You can get the very latest Comcast Instruction booklet from here.
Try also 30331. code for JVC amps. Contact Comcast direct
to confirm this advice I have given. However, if the code is not already in the remote... you may have to purchase another universal remote, or learning type that can then operate all your equipment.

regards
robotek



Posted on Aug 19, 2008

  • Graeme Ross
    Graeme Ross Aug 22, 2008

    Gidday mate :)

    just a quick followup to see how you got on. Any good results from the search for code approach?

    regards
    robotek


×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 876 Answers

Try the codes with a 3 in front of each one.

Posted on Aug 19, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,487 Answers

Try using code 00002

Hope that helps.........

Posted on Aug 18, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 623 Answers

How to program remote
www.scribd.com/doc/202024/comcast-dvr-remote-manual

Posted on Aug 18, 2008

  • ritchie dempacco
    ritchie dempacco Aug 18, 2008

    try this site
    http://www.chsinteractive.co.uk/replacem...

  • ritchie dempacco
    ritchie dempacco Aug 18, 2008

    good luck...

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • JVC Master
  • 13,433 Answers

Model of comcast remote?

Posted on Aug 17, 2008

  • 1 more comment 
  • Ekse Aug 17, 2008

    try 0074 but i dont know the model of your remote so i cant be sure.

  • Ekse Aug 17, 2008

    also 0331

    But do post / comment on what remote you got exactly


  • Ekse Aug 17, 2008

    30074 maybe, need to know what remote it is.

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,268 Answers

Try 5 zeros (00000)

Posted on Aug 17, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,447 Answers

Hi-

Is it asking for 5 codes, try this 4 codes JVC 0331, and this for audio receivers JVC 0074, try checking this link click HERE

hope this helps

Posted on Aug 17, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a remote (universal)control for a Yamaha Amp RX-V2090


To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability. Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the sites.
http://electrohelponline.blogspot.com/
http://remotesearch.blogspot.com/
Universal remote controls are available at most of the electronic spare part selling shops. Visit some on-line sites too, which deals with electronic spare parts.

Aug 11, 2016 | Yamaha Audio & Video Receivers

2 Answers

I need a remote control for model ST-X301L


If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one.
To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability? Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the site http://electrohelponline.blogspot.com/ Check this site too. http://remotesearch.blogspot.com/ Universal remote controls are available at most of the electronic spare part selling shops. Visit some online sites too, which deals with electronic spare parts.

Aug 09, 2015 | Audio & Video Receivers

1 Answer

How do I setup jvc rx-d202 with out remote


Without a remote control, you can't. If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one.
To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability? Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the site http://electrohelponline.blogspot.com/ Check this site too. http://remotesearch.blogspot.com/ Universal remote controls are available at most of the electronic spare part selling shops.

Nov 13, 2014 | JVC RX-D202 Receiver

1 Answer

How do I set my comcast cable remote to the Kenwood cs 5.1 receiver?


These codes may work:

Depending on the comcast model remote you have: Some require the full 5 digit code while others only use the last four digits.

Codes for Kenwood receivers:

31313 31571 30027 31007

Most Direct, Comcast and COX remotes use the same basic codes either with or without the first digit which is always a 0,1, 2, or 3. (0 for cable boxes, 1 for TVs, 2 for DVDs, 3 for audio amps and receivers)

Hope this helps.

Jun 05, 2011 | Kenwood VR-507 Receiver

2 Answers

Need a code for my Comcast Universal Remote


30176 is the code you need . Press Aux and then hold setup until Aux lights up. Enter code. If you want the remote to control the receiver all the time, press Aux and then hold setup until Aux lights up. Enter 993 then press Aux. Aux will flash, now press Cbl and Aux should light up when you use the volume.

Jun 16, 2009 | Yamaha RX-V463 Receiver

2 Answers

I need the remote code for the Yamaha HTR-5740 Surround Sound System. It is for the 3 in 1 Comcast Remote.


follow the comcast instructions, then enter 30176 when you are to enter the 5 digit code.

Feb 28, 2009 | Yamaha HTR-5740 Receiver

1 Answer

Need 5 Digit Remote Code for a Panasonic Receiver HE-100


Try 1518 or 1039

/www.comcast.com/remotes/universal.html

Dec 12, 2008 | Panasonic SA-HE100 Receiver

5 Answers

Need codes for comcast remote to ilo tv


When programming your Comcast universal remote for your TV, the programming guide states that you should enter the 4-digit code provided for your equipment, and if you did it correctly, the TV button will blink twice.

What you have to do is put a "1" in front of your 4-digit code, making your code a 5-digit code. For instance, the code for my Panasonic is listed as 0250. I tried and tried. Then I entered 10250 and it worked perfectly the first time. I did it again to make sure I wasn't seeing things, and it worked.

Good luck.

Apr 10, 2008 | Audio & Video Receivers

2 Answers

Sharp tv 2004 model


Program TV Code
1. Turn on the TV.
2. Locate the 5-digit code for your TV.
3. Slide the MODE switch to the TV position.
4. Press and hold the MUTE and SELECT keys at the same time until the green light under the TV position flashes twice, then release both keys.
5. Using the number keys enter the 5-digit code for your brand of TV. If performed correctly, the green light under TV flashed twice.
6. Aim the remote at your TV and press the PWR key once. Your TV should turn off. If it does not turn off, repeat steps 3 and 4, trying each code for your brand until you find the correct code.
7. Slide the MODE switch to the DIRECTV position. Press TV POWER. Your TV should turn on.

Program DVD, VCR, Stereo Receiver, and Stereo Amplifier Code
The AV1 and AV2 switch positions can be setup to control a VCR, DVD, STEREO, second DIRECTV Receiver or second

1. Turn on the component you wish to control (e.g. your DVD Player).
2. Locate the 5-digit code for your component.
3. Slide the MODE switch to the AV1 (or AV2) position.
4. Press and hold the MUTE and SELECT keys at the same time until the green light under AV1 (or AV2) flashes twice, then release both keys.
5. Using the NUMBER keys, enter the 5-digit code for the brand of component being set up. If performed correctly, the green light under the selected position flashes twice.
6. Aim the remote at your component and press the PWR key once. The component should turn off; if it does not, repeat steps 3 and 4, trying each code for your brand until you find the correct code.
7. Repeat steps 1 through 6 to set up a new component under AV2 (or AV1).

Unable to Find Correct Code
If you were unable to find the code for your brand of TV or component, you can try a code search. This process may take up to 30 minutes.
1. Turn on the TV or component. Insert a tape or disk if applicable.
2. Slide the MODE switch to the TV, AV1 or AV2 position, as desired.
3. Press and hold the MUTE and SELECT keys at the same time until the green light under the selected switch position flashes twice, then release both keys.
4. Enter 9-9-1 followed by one of the following four digits:
Satellite - 0
TV - 1
VCR/DVD - 2
Stereo Receiver/Stereo Amplifier - 3
5. Press PWR, or other functions (e.g. PLAY for VCR) you want to use.
6. Point the remote at the TV or component and press CHAN+. Repeatedly press CHAN+ until the TV or component turns off.
NOTE: Every time CHAN+ is pressed the remote advances to the next code and power is transmitted to the component.
7. Use the CHAN- key to step back a code.
8. When the TV or component turns off, stop pressing the CHAN+ key. Then, press and release the SELECT key.
NOTE: If the light flashes 3 times before the TV or component responds, you've cycled through all codes and the code you need is not available. You must use the remote that came with your TV or component.

Verifying the Codes
Once you have set up the DIRECTV Universal Remote Control using the above steps, use the following instructions to find out the 5-digit code to which your component responded:
1. Slide the MODE switch to the appropriate position.
2. Press and hold the MUTE and SELECT keys at the same time until the green light under the selected switch position flashes twice, then release both keys.
3. Enter 9-9-0. (The green light under the selected switch position flashes twice.)
4. To view the first digit in the code, Press and release then number 1 key. Wait three seconds, and count the number of times the green light flashes. Write this number down.
5. Repeat step 4 four more times for the remaining digits; i.e., press number 2 for the second digit, 3 for the third digit, 4 for the fourth digit and 5 for the final digit.\


Depending on how you set up your remote, the VOL and MUTE may control the volume only on your TV, regardless of the position of the MODE switch. This remote can be set up so that the VOL and MUTE keys work only with the component selected by the MODE switch. To enable this feature, perform the following steps:
1. Press and hold the MUTE and SELECT keys until the green light under the DIRECTV position flashes twice, then release both keys.
2. Using the number keys, enter 9-9-3. (The green light will flash twice after the 3.)
3. Press and release the VOL+ key. (The green light flashes 4 times.)
Now the VOL and MUTE keys will work only for the component selected by the MODE switch position.

To Lock Volume to AV1, AV2 or TV
1. Slide the MODE switch to the AV1, AV2 or TV position to lock the volume.
2. Press and hold the MUTE and SELECT keys until the green light under the selected switch flashes twice and release both keys.
3. Using the number keys, enter 9-9-3. (The green light flashes twice.)
4. Press and release the SELECT key. (The green light flashes twice.)

Jan 26, 2008 | Audio & Video Receivers

Not finding what you are looking for?
Audio & Video Receivers Logo

Related Topics:

1,111 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Audio & Video Receivers Experts

 Elex
Elex

Level 2 Expert

49 Answers

Cindy Wells

Level 3 Expert

4751 Answers

Rod
Rod

Level 2 Expert

224 Answers

Are you a JVC Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...