About 5 months ago i bought kodak easyshare c142.now its power button dosnt works.we use new batteries and again its power button doesnt work.plz give me some easy solution quick.i have warranty

the lack of replies suggests you'd be better off putting a memory card into anything else other than a Kodak easyshare..... just look on here at the amount of Kodak & easyshare problems there are....... but for the record, "GOOGLE" mentions 32GB works fine and class 4 or over.

hello sir .. does your batteries are charged already??
if your batteries are fully charged and your camera didn`t turn on,
there`s a possibility that your camera has a problem. You can visit the store where you bought your camera and you can ask questions there why does your camera didn`t turn on whenever your batteries are ok .. :)

Some cameras can only use SD cards...not SDHC cards. Check your manual.

There are some cameras that consumes power a lot. In this case I will recommend to use rechargable batteries.

check if the battery is low, then recharge it. or replace with new battery if it does not have charger.
see if the power button is good. if it doesnt and you follow my advise then there is some problem with your camera.

Check and clean contacts, but make sure contacts reach the batteries. Sometimes when batteries were reversed, contacts are pushed down too far.

http://support.en.kodak.com/app/answers/detail/a_id/19281/kw/c142

Also, check the kodak.com website for 'support' regarding the Easyshare c142 for more downloads like drivers and manuals on their website.

The card may have become corrupted. Use a separate card reader and download any pictures from the card. Then, insert it into the camera, go into the menu and find "format"...follow the on-screen instructions.

Hi,


If you have not used your camera for few months the problem may be due to weak/worn out batteries or corrosion on the battery contacts inside the camera which can prevent the full power of the batteries from flowing into the camera. Try solution before you do anything else:

Step1: Remove the batteries and wipe the camera contacts firmly with a dry cloth (heavy corrosion may require cleaning with a wire brush, steel wool, or sandpaper).


Step2: Remove any residue that may have fallen into the battery compartment during cleaning, then wipe both ends of the batteries and place them back in the camera. This cleaning clears the problem about 90% of the time. If it doesn't work for you, your batteries may need to be replaced, or the camera may have a problem that requires professional repair.


Thank you !!

Link

Hi,

Kindly browse the link above for some tips for your battery. You can also have a live chat with Kodak Technical Team for further support.

Thank you.