Question about Whirlpool Calypso GVW9959K Top Load Washer

3 Answers

Whirlpool Cabrio Washer Error message code F1

Our washer gets an "F1" error message when it's got 17 minutes remaining in the complete cycle. any ideas?

Cliff
I purchased a Kenmore HE2t (produced by Whirlpool) as soon as I powered the unit up I received an F01 code. I contacted sears service who instructed me to unplug the unit and wait 5 minutes, then reconnect. This cleared the unit until my forth wash load in which it simply locked up with an F01 code. I called for service - two weeks until they can schedule (rural Canada), and if it's the control board Part# W10201186 another 2 to 4 weeks for availablity. This is a washer that is only one week old with 3 loads gone through it. Whirlpool needs to admit fault with it's components and admit the need for a recall. I've told sears that 4 weeks for a repair to a one week old washer is unacceptable and I want a refund or exchange - be assured I will research the replacement Kenmore product to ensure it's not a Whirlpool. (The contract service tech for Sears admitted that the HE series are prone to control board failures, especially in rural areas (power quality related?). Unacceptable for a $950.00 washer (Cdn).

Posted by on

  • 3 more comments 
  • vbalfour Aug 17, 2008

    Thanks... none of those solutions will work. The unit upon repower automatically goes to an F01, regardless of the duration left unplugged (2 minutes or 2 days).

  • Anonymous Sep 06, 2008

    Hii,

    I have had the same problem, however it took 1.5 years before it happened. Part W10201186 is back ordered for another month. I have already waited 1 month. We found on line a replacement part of W10189966 that I just ordered.

  • fctinc1 Feb 27, 2009

    I have code on my whirlpool cabrio wahser f-54 any help

  • Anonymous Mar 24, 2009

    F1 code when the washer (cabrio he) locks the top load door. Not a power supply problem.

  • henry66 May 11, 2010

    Would some one tell me now how much will cost me to fix fault code f01 on kenmore washer since nobody can help me with the problem.

×

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 594 Answers

The following list of codes indicates a possible electronics communication problem with the washer:
Cabrio washer - F1, F2, F40, F41, F42, F50, F51, F52, F53, F54, F72
To remove the error display, press Pause/Cancel twice.
PLACEHOLDER FOR ART
If Pause/Cancel does not work:

  1. Unplug washer or disconnect power for one minute.
  2. Plug in washer or reconnect power.
  3. Re-select the cycle and press Start.
NOTE: If the error remains on the display, call for service.

Please do not forget to rate and comment about your experience with fixya today.

Posted on Aug 17, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 261 Answers

The only board that works is W10201186 as mentioned, current service flashes show a old board part number. Comment by guest that part W10189966 was ordered might give a oL code because the pressure sensor on the board is faulty causing a overload at the motor exceeding 26 amps.

Posted on Sep 07, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

We have a Kenmore Elite Oasis HE, we have been having problems where the electronics will not even let us select anything or start the Washer. The stock control panel was a W10112112, I ordered the replacement from Sears and they sent me a Replacement Control Panel W10189966 - I installed this last night and it would not work, kept flashing F2. We spent almost 2K on the Washer/Dryer at Sears and they are junk. Any ideas on how to fix this?

Posted on Oct 29, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does an F-1 code mean on the display? washer will not start.


power problem

  • Whirlpool Fault Codes - AppliancePartsPros.com www.appliancepartspros.com > Appliance Repair Whirlpool Range / Stove / Oven Fault Codes: Failure Code: Fault Code Description: Solution: 4 Digit Failure Codes (for 2 digit codes see below) F1 - E0
  • Washer Diagnostic& Repair - F1 Error Code power supply ... www.youtube.com/watch?v=BAVS9mI3JLQ
    • BY APPLIANCEVIDEO.COM
    • 4 MIN
    • 65K VIEWS
    2014-02-07 · Troubleshoot your trusty Whirlpool Top Load Washer that has these following symptoms: F1 Error Code At: http://www.appliancevideo.com To ...
  • Whirlpool Cabrio f1 error and how to fix it https://whirlpoolcabriof1error.wordpress.com Control board W10189966 will work with the Whirlpool model numbers listed at the bottom of this page. These models include the Maytag Bravos and Kenmore Oasis.
  • whirlpool F1 code - Appliance Repair Forum forum.appliancepartspros.com > ... > Washer Repair
    • 68 POSTS
    • FIRST POST: 2008-07-28
    2009-09-29 · Discuss whirlpool F1 code in Washer Repair. "whirlpool cabrio washing machine displays f1 code. have already pushed cancel and restart to no avail.
  • Cabrio Washer by Whirlpool F1 Error Code - Facebook www.facebook.com/CabrioWasherByWhirlpoolF1ErrorCode Cabrio Washer by Whirlpool F1 Error Code. 793 likes. Got the F1 Error Code? Tell your story! Share ALL your issues with this washer to warn others...
  • Whirlpool Fault Codes - Appliance Help Online appliancehelponline.com/whirlpool.html Whirlpool Range / Stove / Oven Fault Codes: Failure Code: Fault Code Description: Solution: 4 Digit Failure Codes (for 2 digit codes see below) F1 - E0

  • May 04, 2016 | Whirlpool WTW8200YW Cabrio Top Load Washer

    1 Answer

    F-24 error code so I ran a clean washer cycle, and the laundry room is now flooded.


    what's f24 code? - Kenmore Elite HE3 Washing Machine ...

    https://www.ifixit.com/Answers/View/85549/what's+f24+code

    iFixitAug 21, 2015 - Aiman, The F24 error code indicates a water temperature sensor reading that is ... The Kenmore Elite HE3 is a washing machine by Kenmore.

    F24 Error Code on My Kenmore Washer ' eHow

    www.ehow.com > Home
    F24 Error Code on My Kenmore Washer. Kenmore washing machines have several high-tech features, such as a stain treatment option, reduced energy and ...

    Kenmore HE2 Plus Front Load Washer F24 error code ...

    www.fixya.com > ... > HE2 > Kenmore HE2 Plus Front Load Washer
    ...error code F24 I have a Kenmore HE2T washer and I keep getting an F24 error on it.. I have no idea what is means can't find the manual help!!! The "F24" error ...

    I have a Kenmore HE2T error code F24 - Fixya

    www.fixya.com/support/t3608391-kenmore_he2t_error_code_f24
    Dec 9, 2009 - Posted on Dec 09, 2009.

    Dec 06, 2015 | Kenmore HE2 Plus Front Load Washer

    1 Answer

    My Kenmore HE2t washer is stopping about 8 minutes into the cycle (any wash cycle)..completely turns off. I can run rinse and spin then and it completes the cycle. No error codes when it turns off. W


    htc sensor isnt working i would recon
    perhaps the element isnt getting power
    did it trip your circuit breaker
    some times the htc fails
    all you get is machine stop because the heater is not detected

    if it spins rinses and empties in a timely manner
    then all thats left is the heater system

    Jan 09, 2015 | Kenmore HE2t 3.7 cu. ft. Front Load Washer

    1 Answer

    I have a Kenmore HE2t i keep getting error f21 i cleaned the trap and it still does it


    You may have to unplug it for about 15 minutes and try again. I had a similar problem and this helped.

    Mar 19, 2014 | Kenmore HE2t 3.7 cu. ft. Front Load Washer

    1 Answer

    My Kenmore HE2t washer locked it will not open after unplugging and pressing button to cancel after error message how do I get door opened


    Try turning the machine on and manual advancing through a complete cycle. Then wait five minutes. Do this several times. If the problem persists, it would be best to get a qualified Technician to check the machine out.

    Poppa

    http://www.cdbaby.com/cd/poppamadison

    Oct 04, 2013 | Kenmore HE2 Plus Front Load Washer

    2 Answers

    I have a Whirlpool Cabario. I keep getting an error code of F1. I hit cancel and then start several times and it resets itself and continues. The same thing happens when it is about to start the rinse...


    Hi

    Thanks for using FixYa. Error F1 indicates primary control failure and to resolve this you'll have to replace the machine control assembly. This error should be fixed by whirlpool as its a common issue with whirlpool Cabrio washers, you can call 1-800-253-1301 whirlpool will send a tech. to fix it and pay for the part. Please rate the solution if the issue is resolved or post a comment for further assistance.

    Thanks
    Rylee

    Oct 26, 2010 | Whirlpool Cabrio WTW6600SBT Top Load...

    2 Answers

    Whirlpool Cabrio top loading washer F1 Error


    F1 means the control board is shot. Call whirlpool and they should take care of the parts and labor even though your machine is out of warranty.

    Nov 25, 2009 | Whirlpool Cabrio WTW6600SBT Top Load...

    1 Answer

    Whirlpool Cabrio Washer Error message code F1


    HELLO, Error code F1 indicates a control failure and most likely the machine control board will have to be replaced. Depending on when you purchased the machine, the board may be covered under extended component warranty.
    I had the same F1 problem and they had to replace the control board and something relating to the balance. The tech told me this is a common problem.

    Apr 06, 2009 | Whirlpool Duet 3.8 cu. ft. Front Load...

    Not finding what you are looking for?
    Whirlpool Calypso GVW9959K Top Load Washer Logo

    2,916 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Whirlpool Washing Machines Experts

    Dan Webster
    Dan Webster

    Level 3 Expert

    8205 Answers

    prem mathew

    Level 3 Expert

    662 Answers

    yadayada
    yadayada

    Level 3 Expert

    71231 Answers

    Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...