Question about Uniden 2.4 GHz Expandable Phone System with Digital Answering Machine

1 Answer

We can hear incoming calls but callers cannot hear us. ditto if we ring out.

Posted by on

  • Anonymous Dec 09, 2008

    Same problem with 2 of my handsets. Can hear caller but caller cannot hear me.

  • sharonyounge May 23, 2009

    is there any other solution for me to try? I have a 3 piece handset. on 2 of my handset the caller cannot hear me. When I dial out on it they still cant hear me

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Try this. 1.Remove the battery. 2.Reinsert the battery WHILE PRESSING AND HOLDING THE STAR AND POUND KEYS. This worked on my dct 648-2. Good luck. WAGZ9

Posted on Dec 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Incoming call does not show in caller id window all the time. sometimes it simply says "incoming call" without identifying the caller. other times is works proberly.


Caller ID information is sent after the first full ring. If the call is answered too soon, the caller ID information may not have been sent yet. Some of the many and varied networks do not send caller ID information. In this case you may notice that caller ID is missing only on calls from certain callers. Occasionally bad data is sent, causing your phone to reject it.

Jan 23, 2011 | Panasonic KX-TG5632 Phone

1 Answer

Kx tga931ct


I received no ID on my incoming calls. I have ensured caller taking ID is checked "ON" in phone options but some reason I do not have caller ID on my incoming calls. Anyone help is greatly appreciated. Thanks.

Mar 29, 2010 | Panasonic KX-TG1033S Cordless Phone

1 Answer

Can't dial out or receive calls


constant dial tone and cant dial out or receive calls

Feb 24, 2009 | Uniden Cordless Phone

1 Answer

INCOMING CALLS


Not sure it this is a solution for ALL your problems, but...

I had a similar issue: Phone rings, caller ID info displays then seems to hesitate, then displays only "INCOMING CALL."

The issue seemed to be caused by interference with other devices on the same line (in my case, an alarm system).

Tech support had me change a setting on my TRU9466 base unit (this is one of the PowerMax 5.8ghz models). This is how we did it step-by-step on the base unit:

MENU
GLOBAL SETUP
IN-USE LINE SETUP
select LINE 1
switch to TYPE B

This seems to have solved the Caller ID "interference" issue -- my Caller ID now displays as it should. The Tech Support person suggested trying that TYPE A/TYPE B setting on "OFF" if TYPE B didn't solve the problem, but thankfully, it did.

Now Cheryl, it sounds like your issue is more involved than this -- I didn't have any connection problems -- but perhaps they're related -- you might try my solution.

Mar 07, 2008 | Uniden 5.8GHz Cordless Phone

2 Answers

How to change Flash timing


The only reference to flash timing I can find in the manual is shown below for you, also here is link to manual :
I hope it helps !
http://www.uniden.com/products/productdetail.cfm?product=TRU8885-2

If you have Call Waiting service and a call waiting
tone sounds while you are on a call, press talk/flash
on the handset or flash/find hs on the base to accept
the waiting call. There is a short pause, and then you
will hear the new caller. To return to the original
caller, press talk/flash on the handset or flash/find
hs
on the base again.

Setting the Ring Time
Ring Time allows you to set the number of rings the caller hears before your
answering system plays the outgoing message. You can set the ring time to answer
after two, four, or six rings. If you enable the Toll Saver (TS), the answering system
picks up after two rings if you have new messages and after four rings if there are
none.
1) Enter the Answ. Setup menu, and then the Ring Time
submenu (see "Entering the Menu" on page 16).
2) Press volume up/down to select a Ring Time (Toll
Saver, 2 Times, 4 Times, or 6 Times).
3) Press the OK soft key. You will hear a confirmation tone.
Setting the Record Time
Record Time sets the duration for recording the incoming messages. You have three
record time options. The options "1 minute" or "4 minutes" set the duration for
recording the incoming messages. "Announce only" answers the call but prevents
the caller from leaving a message.
1) Enter the Answ. Setup menu, and then the Record
Time submenu (see "Entering the Menu" on page 16).
2) Press volume up/down to select Record Time
(1 Minute, 4 Minutes, or Announce Only).
3) Press the OK soft key. You will hear a confirmation tone.

May 03, 2007 | Uniden TRU8885-2 Cordless Phone

Not finding what you are looking for?
Uniden 2.4 GHz Expandable Phone System with Digital Answering Machine Logo

Related Topics:

287 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Lands Phones Experts

kakima

Level 3 Expert

101711 Answers

Dave Ellis

Level 2 Expert

84 Answers

k24674

Level 3 Expert

7993 Answers

Are you an Uniden Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...