My USB driver

Hello,

Thanks for your question, but please take your time and post a new question to the website with a bit more information, brand and model of your computer, what windows is installed on it and what device you are trying to install drivers to, what error messages you are getting and similar, with the 3 words provided I can't offer any assistance at this point.

Best wishes,
Ekse

from trekstor's web

• Communication with the PC
• Suitable for new Windows® Vista
• Suitable for Windows® 2000, XP, Vista, Mac® OS X, Linux® from Kernel 2.6.x
• Extremely fast data transfer from Hi-Speed USB 2.0 connection (compatible with USB 1.1)
• Preformatted, immediately operable without driver

Usually this happens whenthe software for the usb ports' controller is not as current as it should be.
check your computer manufacturers' website for and updated driver. USB 2.0 is what you are looking for. This can work in reverse also , if you are using a legacy USB device (mouse) and try to use USB 2.0 devices on the same controller it can cause problems as well. A new USB mouse is inexpensive, but always check the BIOS and make sure all USB ports are running and that the controller is enabled for them with current drivers.
If you post the computer make and model number i can be more specific with my advice.
Please post again if you need further assistance & thanks for using fixya..
Regards.

First ensure the webcam is Vista compatible.

Also ensure you have right driver software for yor webcam.

Install software for the webcam before connecting the cam to usb.

If you still get in trouble , do the following (Vista only):

Locate camera driver software on disk, or on downloaded files.
Click right mouse button on installer file.
A menu will drop down, chose "run as administrator".
Say yes whenever asked for authorizations to system changes.

If you need drivers for your cam, post a new request on Fixya providing make and model. To post a request use link here:Solve Your Problems

I don't know what do you want or what you are asking but incase you are unable to see my full solution which I posted into your premium, here it is again. Solution #3 posted on Aug 09, 2008

Ekse
Rank: Guru
Rating: 85%, 1186 votes
Looking for other codes, but while im doing that you can try

COde search function is an alternative method to programming your device without using the code list
Turn on the device you want to set
Aim the remote control at the device
Press the decive button for the item you want to program
Press and hold the SET button until the LED light up solid red
Press the MUTE/SEARCH button. The LED will shut off first then light up solid red.
When the device turns off, press the OK button to store this code.

Comment by Ekse, posted on Aug 09, 2008 you can try 030, 041, 061, 106, Comment by Ekse, posted on Aug 09, 2008 A few more:

003, 004, 005, 006, 008, 029, 111, 112 Comment by Ekse, posted on Aug 09, 2008 More: 170

I was referring to the links posted by Ekse. If you could send me the info you have, I will point you where the capacitors are.
My email is jah2mil@hotmail.com

Hi,

If you did not get a notice that somebody else was before you when you click on "POST", you were the first.
If you posted first and immaterial whether somebody elses posts after you and the user does not come back to review/rate/view, then you get the FixYa after 7 days;
If you posted first and then somebody else posted after you, your solution gets bumped down and the new gets #1.
Am not sure if FixYa changed the method, but the user can only view the 1st solution and will see the second if after he rates the first as a TFT.
Ganyan talaga una-unahan lang, minsan swertehan. Hindi mo masasabi na tama o angkop sagot mo. May pagkakataon mali nga ang sagot awarded pa rin or nauna ka nga pero mas pinili ng user yung iba.
Best is to provide a technically correct solution and then let it be.

Cheers.

I just posted a response for the Toshiba. If that doesnt help I will assist them to trouble shoot and get the set operating again. That other expert should be banned from here.

Convert the songs to mp3 format, and you will never have this problem again.

Hi Ekse,

Thanks for bringing this to my attention. Could you please email me at alex@fixya.com so that we can further discuss it.

Thanks
Alex