Question about Nortel NETWORKS CONTIVITY 1100 T1 WAN BNDL 5 Router

2 Answers

How to connect Nortel BSR222 (Business Secure Router 222) with tplink

I have Nortel BSR222 (Business Secure Router 222) this 4 port rg45
i live in egypt .. dsl here work with cable rg11 (like tel cable ) so i bought router tplink to connect the 2 routers
i don't know how to connect the 2 routers
pls send me to show how
thanxs

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Iam using nortel secure router 1001s. using v.35 cable iam connecting my router to ASM i52 RAD modem. serial int is down. but when iam connecting the same router with same v.35 cable with other mlln modem, link is up. but in RAD modem connecting a cisco router, link is getting up

Posted on Mar 24, 2010

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 41 Answers

Rj11 are connectors used to deliver signals to a device. Mostly, modems will be able to support this type of connection. Make use of a modem, bridge it and connect the router to it.

Posted on Jul 08, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bsnl adsl modem configure with TL-MR3420 router!


make bsnl adsl router as abridge router , then connect tp link router from wan port with any one of lan port of adsl router , then configure tplink router connection depending how you get internet from your ISP

Jan 30, 2014 | TP-LINK TL-MR3420 Wireless Router

2 Answers

Nortel 1050 and BSR222 VPN Connection


1.  What you have is a "software settings" in several  locations that require "exact entries".  Without us seeing what  "entries" are being asked by the programs or what data needs to be inserted by the routers at each location, there is no way anyone could possibly solve your problem long distance.

2.  The basic generic information was supplied to you at another website you visited but obviously did not help you.  I appreciate you having the confidence by asking anyone here to guide you but I think you need to have some one physically there to fix the problem.  If someone here knows the answer and can solve this problem by all means jump in.

3. My solution is for you to look in the yellow pages for your town where you live under "networks" or "computer networks".  Some one locally should be able to come out and solve this for you.  VPN networks at this level require a "hands on" solution unfortunately and not a "cook book" answer.  Get one field wrong, you will spend days troubleshooting it.

This is the best solution for your problem in this case.  Anything else would be a great disservice to you.

Oct 23, 2007 | Nortel NETWORKS CONTIVITY 1100 T1 WAN BNDL...

1 Answer

How to lock wireless router?


To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Jan 25, 2013 | LG -Nortel Elo WR100T 108Mbps 802.11g...

1 Answer

I disabled the wireless connections how do i turn it back on


To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Aug 29, 2012 | LG -Nortel Elo WR100T 108Mbps 802.11g...

2 Answers

I have Time Warner Service set up @ home for my Home PC. I bought a Netgear N300 Wireless Router for my laptop. Do I have to plg into the Time Warner Modem to set up my Laptop? ANd what do I do?


The modem wants to plug into the wan or internet port on the router, this port is usually different in color and location from other wired ports.

You will want to program the router settings, either use the wizard, or change: Wireless security wit WEP at least, and give a password, like you home or cell phone number (which you can remember when a guest comes and needs access), change system ID to something you would remember, change router access password AND LOG IT,
and check that the router broadcasts it's presence (usually set to yes), and finally change the channel to 11 and get less landline wirelss phone interference.

To do this programming, by the way, you usually need to plug into the modem with a network cable and direct your browser to it, something similar to 192.168.1.1 in the address bar, but get the manual and follow their directions.

Oct 16, 2010 | Computers & Internet

1 Answer

Nortel 3120 Secure Router


NetFlow is a network protocol developed by nortel Systems to run on router IOS-enabled equipment for collecting IP traffic information

Jan 30, 2009 | Nortel 3120 Router (SR2102002E5)

2 Answers

Bsr222 tunneling problem


What are you connecting into the bsr at distant end, lap top or ip phone

Dec 28, 2007 | 2wire (1000-400108-001) Router

2 Answers

Nortel 1050 connecting a VPN to a BSR222


Does the 1050 support tunnels to the BSR222 with dynamic addressing?

Oct 24, 2007 | Computers & Internet

1 Answer

Nortel 1050 & BSR222 VPN Connection


If you want to have a dynamic IP at the remote site you can forget about it, I placed a support call to Nortel and they told me that even if the NAT traversal option is there in the BSR222 they do not support it!!!
I was able to use a bsr222 with a static ip accepting connection from linksys using dynamic, this works.
see some example doc at www.chbr.info/linksys_bsr222.zip

Oct 23, 2007 | Nortel NETWORKS CONTIVITY 1100 T1 WAN BNDL...

Not finding what you are looking for?

Open Questions:

0 Answers

Nortel 1001s secure router qos configuration i have a nortel 1001s secure router i would like to configure qos on it i managed to managed to configure qos but it seems not to be working as when i try to calculate or monitor my bandwidth i seem not to get any data, here is a view of the running config of the router R-KEN-BITU-001 > sh run Please wait... (up to a minute)module serial 1 cable_type v35 clock_rate 2000000 crc 16 mode dte clock_source line data_mode normal exit serialinterface ethernet 0 description "Bitumen LAN" ip address 10.113.250.254 255.255.255.192 mtu 1500 qos exit qos exit ethernetinterface ethernet 0.1 description "Nortel Phones" ip address 18.113.119.4 255.0.0.0 exit ethernet interface ethernet 1 description "KDN link to HQ" ip address 172.16.18.2 255.255.255.252 mtu 1500 qos add_class NortelRTP root-out cr 40 br 128 add_class NortelDATA root-out cr 88 br 128 class NortelRTP add_src_ip 172.16.18.0 255.255.255.192 exit class class NortelDATA exit class enable policing outbound enable policing inbound exit qos exit ethernetinterface bundle Bitumen exit bundleinterface bundle bitumen exit bundle hostname R-KEN-BITU-001log utctelnet_serverssh_server exit ssh_servertelnet_banner banner1 "TOTAL KENYA LIMITED" banner2 "BITUMEN PLANT" exit telnet_bannersystem display-boot-config noip load_balance per_flow route 0.0.0.0 0.0.0.0 172.16.18.1 1 dhcps pool Total-Bituen exclude-range 10.113.250.244 10.113.250.254 exit pool pool Total-Bitumen domain total_kenya_hdq.com dnsserver 10.113.118.5 tftpserver 10.113.255.39 netbios_name_server 10.113.118.5 lease 604800 network 10.113.250.192 255.255.255.192 default_router 10.113.250.254 commit exit pool interface ethernet0 enable exit dhcps exit ipfirewall global algs exit algs max-connection-limit self 2048 exit firewallfirewall internet exit firewallfirewall corp policy 1024 out permit exit policy exit firewalltftp_servergui enable exit guisnmp-server snmp-enable community bituro ro community biturw rw location Bitumen-Plant chassis-id R-KEN-BITU-001 trap-version 1 exit snmp-server please assist in any way as im being fried on this... please thank you

Oct 29, 2008 | Nortel NETWORKS CONTIVITY 1100 T1 WAN BNDL...

See all Nortel NETWORKS CONTIVITY 1100 T1 WAN BNDL 5 Questions

Nortel NETWORKS CONTIVITY 1100 T1 WAN BNDL 5 Router Logo

Related Topics:

798 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nortel Computers & Internet Experts

Jax Planet
Jax Planet

Level 2 Expert

921 Answers

kwiz

Level 1 Expert

23 Answers

Vuk B

Level 3 Expert

678 Answers

Are you a Nortel Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...