Question about Projection Televisions

1 Answer

I am the owner of a Samsung 42in Plasma tv, model no PS42Q7HDX/XEU. The tv switched itself off yesterday and I have been unable to switch it back on. I have tried the plug fuse and this is okay. Any ideas? Many thanks Mr I Beale.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Your tv must be getting overheaten unplug it from the wall and leave for a day or so then try it!

Posted on Aug 17, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Samsung hcm4216W turned off by itself loops.


Instead of typing model number of your TV (that located on right hand side and on the back of TV) you published here part number of your TV's remote control. LOL.
Anyway... If it is LCD/plasma panel that you talking about - than power supply have bad electrolytic capacitors that have to be replaced. You can recognize 'em by bulged/swollen tops (instead of flat tops of good capacitors).
This repair required soldering skills.

Mar 09, 2010 | Samsung HCM4216W 42" Rear Projection...

1 Answer

My dlp tv keeps switching itself off


take bulp vent cover off rear of tv. there is a little plastic switch that gets pressed in by this cover. i taped mine in because the cover wasnt pressing it in all the way and causing tv to shut off all the time. havent had a problem since.

Jan 11, 2010 | Samsung SP46L6HXX/XEU 46" HDTV-Ready DLP...

1 Answer

My TV turns off. As soon as I turn it back on it


try the lamp door switch in the back of the TV, door is held on by 1 screw, after door is open there is a blue switch by the slide that protects the lamp. push the switch down and up a couple of times then put cover back on and see if tv stays on. this was my problem with this exact tv.

Dec 17, 2009 | Samsung HL-S5086W 50" HDTV

1 Answer

My instructions are in spanish need english


There are three models: DVD-R150 , D-R150 and DVD-SR150M: I hope your model is one of these.
The english manual for DVD-R150 can be found at:
http://downloadcenter.samsung.com/content/UM/200703/20070320093749218_01273A-R150,155-XEU-ENG-BM.pdf

The english manual for DVD-SR150M can be found at

http://downloadcenter.samsung.com/content/UM/200708/20070821193220921_01452A-SR150M-XEU-ENG-BM.pdf


Nov 07, 2009 | Projection Televisions

1 Answer

Samsung DLP TV HL50A650 switches on and off


more than likely, the power level is too high for the TV. Make sure the votage switch on the back of the set matches what you are plugging into. For Example, in the US the set needs to be set to 110v, Europe is 220v. If you're getting a burning smell, it might be too late. That tells me that the amount of volts to the TV is greater than what the set is expecting.

Oct 01, 2009 | Projection Televisions

1 Answer

Tv won't stay on


You need to provide more information. Does it turn itself back on? Bottom line is I don't think you are going to find an easy fix for it, most likely you will have to ship it to a service repair facility.

Now the cold truth - Most plasma TV's are very expensive to repair, and probably will cost the same as what you paid for it. Buying cheap is not always the best, next time stick with a namebrand plasma like Panasonic, Samsung, or Sony. It may cost a little bit more in the beginning but in the long run it will cost you less. There is nothing wrong with buying a cheap ILO tv, but stick with 19" system that you won't be upset with if it breaks (throw away tv)

Apr 29, 2009 | Projection Televisions

1 Answer

Hi,I have a Samsung LCD TV -Model LE40R82BX/XEU.The display is cracked and I have Rainbow colors down one side of it.I can take the tv apart and I want to put in a new LCD.Any ideas of a good cheap site[s]...


Unfortunately, the LCD panel itself may cost more than a replacement set. Check in your local area for a Samsung parts distributor. They should be able to provide you with the part number and cost for the replacement.

Dan

Dec 31, 2008 | Projection Televisions

1 Answer

NEED SIGNAL PANEL FOR SAMSUNG LCD TV MODEL LE32R87BDX/XEU


www.partsstore.com is a certified distributor for samsung just enter the make and model number of your set and it will bring up all the parts they carry. They usually have circuit boards for samsung

Mar 12, 2008 | Projection Televisions

1 Answer

Samsung SP43W6HPX\XEU Rear projection


HLP, HCN HL-S The Start-up Problem or/and
3 LEDs in the front blinking.

Unplug the set, pull out the lamp module (not all the way - leave it on the track) and push it back in.

Power issues (Tv not turning on) were typically due to faulty ballast. While the TV reports a bad lamp it is the ballast itself causing the issue. Samsung is well aware and will replace both the ballast and the lamp (since the lamp can be prematurely aged but the bad ballast). After replacment most people stop having issues.

Oct 25, 2007 | Samsung HCN4226W 42" Rear Projection...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

130 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

61249 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...