Question about Janome Memory Craft 5700

1 Answer

Janome Memory Craft 7000 Sewing Machine- When I turn the machine on it moves the needle position slightly and message comes up Err 4, then it freezes. Any clues ????

Posted by on

  • 1 more comment 
  • sewkool54 Sep 03, 2008

    When I turn my Memory Craft 7000 machine on it needle bar moves slightly then nothing. Showing Er in stitch width window and 3 in stitch legnth window

  • Theresa Yelverton Nov 22, 2008

    When I turn my Memory Craft 7000 machine on it needle bar moves slightly then nothing. Showing Er in stitch width window and 3 in stitch length window

  • Lucy Mabon
    Lucy Mabon Dec 10, 2016

    Same problem for my one what did you do?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My Memory Craft 7000 sometimes does the same thing, if it's very cold. Try warming it up by placing it near a heat source, a vent or a floor heater, for a few minutes. Then it works perfectly.
I've used these machines for over 20 years now, and they're my favorite!

If this doesn't solve your problem, you need to take it in for servicing.

They are work horses, but they do need their maintenance from time to time.

I hope this helps you.

Posted on Jan 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hand wheel won't move.Scissorbutton wont work.


Repairing a Janome or New Home Sewing Machine ...

www.thriftyfun.com/Repairing-a-Janome-or-New-Home-Sewing-Machin...
Question: Memory Craft Machine Won't Run ... I'm a computer repair technician and good with tools, is this something I could fix or should we .... machine which will zig zag fine if i turn the wheel by hand or sew very slowly; as soon as I speed ...

Janome won t turn Sewing Machines Questions & Answers ...

www.fixya.com > Forum > Tags > won t turn > Sewing Machines
Janome sewing machines won t turn related questions and answers. ... Ad. Question about Memorycraft 6500P Computerized Sewing Machine ... it could be a part has worn or broken, esecially when the hand wheel won't turn,, it needs to be.

Janome wheel not turning Sewing Machines Questions ...

www.fixya.com > Forum > Tags > wheel not turning > Sewing Machines
Janome sewing machines wheel not turning related questions and answers. ... 10000 janome jamming fly wheel won't turn fly wheel won't turn warning for too thick ...the hand wheel is not moving the needle at all Hi I was unable to move the needle at all ... Janome Memory Craft 9000 Computerized Sewing Machine.

Jan 25, 2016 | Janome Memorycraft 6500P Computerized...

1 Answer

My janome 11000 memorycraft's needle threader has jammed in the down position and cannot be moved


Thanks to floraq803, we have our 11000 working again. The needle threader was stuck in the down position. We turned off the machine, and turned the wheel (which controls where the needle is) until the needle threader bar was straight (approximately 1/2 way between the needle being all the way down and all the way up). Turned on the machine and the threader came back up again. Now back to sewing.

Jan 20, 2013 | Janome Memory Craft 9000 Computerized...

2 Answers

Janome memory craft 7500


The feed dog will rise as soon as you turn the handwheel one time. Just put the fabric in it and sew. It will come up automatically as long as you have moved the lever to the correct position.
sewman7

May 15, 2008 | Janome Memory Craft 9000 Computerized...

1 Answer

Janome 9000


I have a Janome 9000, was sewing and broke needle, replaced and broke another. I didn't have machine threaded, took out bobbin and would sew a little and stop saying thread broke. I took off top plate and started machine again, sew a little and stop saying thread broke. So I took out bobbin case and sewed again and stopped repeating the message. Everything looks OK, bobbin case and top plate. I guess I want to know if the timing could be off or do you think it is the computer part of the machine...Should I take it to the Sewing Machine Shop??

Apr 30, 2008 | Janome Memory Craft 9000 Computerized...

Not finding what you are looking for?
Sewing Machines Logo

1,426 people viewed this question

Ask a Question

Usually answered in minutes!

Top Janome Sewing Machines Experts

Douglas Plant
Douglas Plant

Level 2 Expert

165 Answers

Irene Tulloch

Level 2 Expert

458 Answers

SewTechWayne
SewTechWayne

Level 2 Expert

186 Answers

Are you a Janome Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...