Question about Nikon Coolpix L1 Digital Camera

1 Answer

A blinking red and white hand in the upper right portion of the screen

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Camera shake (blur) warning.

You might have the camera set to an inappropriate 'scene' mode. If you are using 'landscape' or 'snow' for an indoor or night shot for example, the camera will select a slow shutter speed which will increase the chance of blur - hence the warning.

If you keep the selector switch all the way to the left (auto mode) you should be fine in most situations. Only use the 'scene' modes for specific purposes.

Posted on Feb 15, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to wire trailer plug


hope this helps


6 pin socket

w1s.jpg

w1p.jpg

6 pin plug


7 pin socket

w2s.jpg

w2p.jpg

7 pin plug


5 pin socket

w3s.jpg

w3p.jpg

5 pin plug



7 pin socket

w4s.jpg

w4p.jpg

7 pin plug



7 pin socket

w5s.jpg

w5p.jpg

7 pin plug



7 pin socket

w6.jpg

7 pin plug





12 pin socket

w7.jpg

12 pin plug



small 6 pin round plug & socket

1 tail, clearance - brown

2 left hand turn - yellow

3 right hand turn - green

4 stop - red

5 electric brakes - blue

6 earth - white



small 7 pin round plug & socket

1 left hand turn - yellow

2 reverse - black

3 earth - white

4 right hand turn - green

5 electric brakes - blue

6 stop - red

7 tail, clearance, side markers - brown

roundskt.jpg round socket

large 5 pin round plug & socket

2 left hand turn - yellow

3 earth - white

5 right hand turn - green

6 stop - red

7 tail, clearance, side markers - brown



large 7 pin round plug & socket

1 left hand turn - yellow

2 reverse - black

3 earth - white

4 right hand turn - green

5 electric brakes - blue

6 stop - red

7 tail, clearance, side markers - brown



7 pin round heavy duty plug & socket

1 earth - white

2 left hand rear , clearance and marker - black

3 left hand turn - yellow

4 stop - red

5 right hand turn - green

6 right hand rear , clearance and marker - brown

7 reverse/auxilary - blue



7 pin flat plug & socket

1 left hand turn - yellow

2 reverse - black

3 earth - white

4 right hand turn - green

5 electric brakes - blue

6 stop - red

7 tail, clearance, side markers - brown


7_flatsocket.jpg flat socket

12 pin flat plug & socket

1 left hand turn - yellow

2 reverse - black

3 earth - white

4 right hand turn - green

5 electric brakes - blue

6 stop - red

7 tail, clearance, side markers - brown

8 battery supply - orange

9 auxiliaries - pink

10 earth - white

11 rear fog lamp - grey

12 auxiliaries - violet


Feb 02, 2013 | 2004 Toyota RAV4

2 Answers

Google maps: street views keep going to a split screen with street on top and satellite on bottom. Also street views in full screen mode disappear after a second and the split screen mode reappears.Very...


When you go into the split screen, and you don't want to be there, just click the little arrow in the lower right hand corner (the arrow pointing down and to the right). This will reduce the bottom map portion into a small overview box in the lower right portion of the screen. It only takes a second to get out of the split screen that way. To get back into split screen, click the arrow in the upper left corner of the overview box (the arrow pointing up and to the right).

Aug 15, 2011 | Computers & Internet

1 Answer

A red light is blinking on the screen ??


Parulanu95, I have a blinking red light in the upper right quadrant. It looks like a broken flower in a rectangular flowerpot. I have no idea what it is. Did you ever find out?

Mar 21, 2011 | Canon ZR25MC Mini DV Digital Camcorder

1 Answer

I need the wiring colour codes for 2002 santa fe car stereo


Hi,



Basically the wiring of the large harness corresponds to the pins like this.

Starting in the upper right hand corner and working down the right side from A12 down to A1.

1=Left rear output-red
2=Left rear output-blue
3=Right rear output-black
4=Right rear output-yellow
5=empty
6=Left front input-black
7=Left front input-yellow
8=Left rear input-orange
9=Left rear input-green
10=Amp 'ON'-blue&orange
11=empty
12=Amp sensor-black&orange

Back up to upper left hand corner on the large plug

13=Right front tweeter output-red
14=Right front tweeter output-blue
15=Left front tweet output-red
16=Left front tweeter output-blue
17=empty
18=Right front input-red
19=Right front input-white
20=Right rear input-blue
21=Right rear input-red
23=Right front sub (+) output-yellow
24=Right front sub (-) output-black

The small harness is the same above with the upper right position being pin 1 going down to pin 4 then back up to the top for pin 5 down to pin 8.

1=Memory Power-Lrg White
2=Amp Ground- Lrg Black
3=Left front sub (+)output-yellow
4=Left front sub (-) output-black
5=Left front mid (+) output-white
6=Left front mid (-) output-brown
7=Right front mid (-)output-brown
8=Right front mid (+) output-white


Hope this will help you.

Thank you

Jan 04, 2011 | 2002 Hyundai Santa Fe

1 Answer

There is a green bowing line in the upper right hand corner of my TV


Projection TV sets are known to have two common problems. The first problem that is common to these sets is convergence failure. When this happens the TV will usually look 3D, Wavy/Distorted, etc. It may also shutdown and blink an error code.

The second common problem with Projection TV sets is dull video, halos around objects, white looking video, or red overpowers the screen. This is commonly caused by the fluid in the lens being clouded over.


You can find more details and solutions here on Fixya at the following link below. Or click HERE

3d884ac.pnghttp://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Oct 29, 2010 | Hitachi 46F500 46" Rear Projection...

1 Answer

How to set the hands to match the correct digital display on my Casio wave ceptor 2734 wva-104h watch



Setting Digital Time
  1. The digital timepiece on a watch is set using the function buttons on the outer part of the watch face. To set the digital time, press and hold the upper left button until the seconds starts blinking. Press the lower right button to reset the seconds to "00."

    Push the lower left button to move to the Daylight Savings Time portion of the watch. Use the lower right button to toggle between "On" and "OFF."

    Press the lower left button twice. The hours unit will start blinking. To advance the hour, press the lower right button repeatedly until the correct hour is displayed. If you need to move the hours unit backwards, press the middle right button until the correct hour is displayed. When the hour is set, press the lower left button to switch to minutes, and use the same commands to change the minutes unit.

    After the time is set, press the upper left button to exit the digital time setting function.
  2. Setting Analog Time
  3. You may find after setting the digital timepiece that the analog display does not match. When this occurs, you need to set the analog time. To set the analog time, press the lower left button 6 times. Next, press and hold the upper left button until the digital time starts to blink. This indicates that you are in analog time setting mode.

    Analog time adjustment is completed using the lower right button. Every time you press the button, the analog time will advance 20 seconds. If you need to make a big change to the analog time, press and hold the lower right button to make the hands move faster. Once the analog time is set, press the upper left button to exit the analog time setting mode.

Aug 21, 2010 | Casio Watches

1 Answer

What does the flashing red hand in the upper right


The flashing red light is warning you that the shutter speed will be too long for handholding the camera. Put the camera on a tripod or other stable surface, and/or use the flash.

Nov 08, 2009 | Nikon COOLPIX S9 Digital Camera

1 Answer

Red hand blinks on screen upper right side. how do i deleet this problem. nikon coolpix 7500.


The red hand icon flashing shows that the camera is using a slow shutter speed, and is a warning to be careful to hold the camera steady.

You could put the flash in auto mode and it will fire when the light is low.

Jul 16, 2009 | Nikon Cameras

1 Answer

50 " Phillips Plasma tv. Screen is black, blinking red light.


Sounds more like blown/exploding capacitors on the PSB-Power Supply board. No OSD-on screen display a blinking led or chatter/relay clikcing at startup is the tv going into fault protection and bypassing the startup pins. The YSUS-Main controls the pic which is attached to 2 buffer boards the YBU-upper YBL-Lower. They control the upper and lower portion of the OSD and the YSUS controls both of them. Since you're getting No OSD you need to check for blown caps on the PSB first. Unplugging the set resets the error again. So you start all over again.

Best Rgards and Semper Fi

Dec 19, 2008 | Philips BDS 4611 46 in. Plasma Television

2 Answers

MacBook opening screen leaves a one inch black strip on both sides.


use the gray bar on top to move the screen to the upper left hand corner.  Then click and drag the bottom right portion of the screen to the size that you want it be.

Mar 21, 2008 | Apple MacBook PC Notebook

Not finding what you are looking for?
Nikon Coolpix L1 Digital Camera Logo

Related Topics:

315 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nikon Cameras Experts

kakima

Level 3 Expert

102366 Answers

Steve

Level 3 Expert

3287 Answers

Ric Donato

Level 2 Expert

225 Answers

Are you a Nikon Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...