Question about Standard (CRT) Televisions

1 Answer

RCA TV 27F522T PROBLEM

I HAVE A PROBL TURN ON GO OFF

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Your vertical output ic or a resistor in the vertical circuit could be defective.

Posted on Jul 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I dont have a remote for tv /27F522T i cant turn it on


They are available on eBay

http://www.ebay.com.au/sch/i.html?_trksid=p2050601.m570.l1313&_nkw=27F522T+tv+remote&_sacat=0&_from=R40

Feb 15, 2014 | RCA F27664 27" TV

2 Answers

RCA TruFlat 27" TV Flips Through Channels by Itself


just the tacking switch to be replaced in order to function manualy..

Aug 10, 2008 | RCA Standard (CRT) Televisions

1 Answer

How do i turn off fda on rca 27f522t


Most RCA sets use a four digit code to control the v-chip. The code reset is different depending on the model. Try each number until you find the one that works for you.

1. Hold down the MENU button on the remote and VOLUME DOWN button on the TV it's self at the same time for at least 4 seconds. The set won't say so, but the lock will be unlocked

2. Hold down the 0 (zero) button on the remote and the VOLUME DOWN button on the TV itself at the same time for at least 4 seconds. The set won't say so, but the lock will be unlocked

3. Hold down the MENU button on the front of the TV and the TV button on the remote at the same time for at least 4 seconds. 4- Hold down GO BACK button on the remote and MENU button on the front of the TV at the same time for at least 4 seconds.
Hold down EJECT button on the front of the TV set and the MENU button on the remote at the same time for at least 4 seconds. Depending on the model, one of the methods should unlock the V-chip. Now, if desired, you can change the settings on the V-chip by going to the MENU and going to PARENTAL CONTROLS, or on some sets, going to MENU and then going to TV SETUP, then to V-CHIP SET. Check this site too.

Dec 17, 2012 | RCA Standard (CRT) Televisions

1 Answer

RCA Truflat TV 27F522T is completely locked both manually and remote do not work. Was working manually but after checking menu for block accidently FPA locked not can't turn on tv at all.


You must have its remote control to unlock this TV. Try to make your remote control get repaired, and check these.
Most RCA sets use a four digit code to control the v-chip. The code reset is different depending on the model. Try each number until you find the one that works for you.

1. Hold down the MENU button on the remote and VOLUME DOWN button on the TV it's self at the same time for at least 4 seconds. The set won't say so, but the lock will be unlocked

2. Hold down the 0 (zero) button on the remote and the VOLUME DOWN button on the TV itself at the same time for at least 4 seconds. The set won't say so, but the lock will be unlocked

3. Hold down the MENU button on the front of the TV and the TV button on the remote at the same time for at least 4 seconds. 4- Hold down GO BACK button on the remote and MENU button on the front of the TV at the same time for at least 4 seconds.
Hold down EJECT button on the front of the TV set and the MENU button on the remote at the same time for at least 4 seconds. Depending on the model, one of the methods should unlock the V-chip. Now, if desired, you can change the settings on the V-chip by going to the MENU and going to PARENTAL CONTROLS, or on some sets, going to MENU and then going to TV SETUP, then to V-CHIP SET.


Jun 28, 2012 | Standard (CRT) Televisions

1 Answer

I need operation manual for a rca tv model 27f522t


Hi,

You can download the operation manual in PDF format by clicking this link.

You'll require Adobe PDF Reader installed on your computer to view the manual. If it is not already installed on your computer, download it free from: http://get.adobe.com/reader/

Thanks for using FixYa.

Jul 16, 2010 | RCA TruFlat 27F520T 27" TV

2 Answers

I have a rca truflat tv 27F522T how do i change it from mona to stero


This is a stereo TV:

From the manual:

Stereo Capability: Includes built-in amplifier twinspeaker
system; allows reception of TV programs
broadcast in stereo.

Use a stereo cable

Sep 17, 2009 | RCA TruFlat 27F520T 27" TV

1 Answer

My 27F522T tv turns itself on and changes channels bu itself.


hi
and first of all if u dont want ur tv to turn on by itself when you dont want it to just un plug the cord and when your going to use it just plug it back on.

Sep 16, 2009 | RCA TruFlat 27F520T 27" TV

2 Answers

Why does my RCA TV cycle through channels on its own?


Hi there!
I think your remote may be at fault. Liquid spill or sweat from the hand accumelates on the inside over some time and then becomes sticky. Some of the buttons may be permanently activated. Then other functions won't work. Have someone check it for you or if familiar yourself. Regards, JUS004

Mar 12, 2008 | RCA TruFlat 27F520T 27" TV

1 Answer

Probl?¨me t?©l?©vision rca f32650


Fait-il un noice de gazouillement quand il est branché ?

Dec 24, 2007 | RCA F32650 32" TV

2 Answers

27F522T RCA


REPLACE IT! IF IT BLOWS AGAIN THEM IT TIME TO SEND IT TO A SHOP

Dec 06, 2007 | Standard (CRT) Televisions

Not finding what you are looking for?
Standard (CRT) Televisions Logo

Related Topics:

191 people viewed this question

Ask a Question

Usually answered in minutes!

Top Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

68368 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...