Question about Kenwood KDC-2011S CD Player

1 Answer

Kenwood kdc 3011 cd player

I have a Kenwood kdc 3011 in my car for years now and its worked great until yesterday. When I turned on my car, the only thing I could hear was a static noise coming from the passenger side door speaker...nothing out of anything else. The static sound would not get louder as the volume went up, and would only go away a few seconds after turn the entire thing off. I checked and this static sound stayed the same when I put in a CD...only sound was static on the side door, thats it. If anyone knows of any idea, let me know. Thanks!

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 30 Answers

Have you tried the balance and fader control?
Also make sure the ground or - negative wire has a good connection for that speaker from the back of the unit. Or it could be the internal amplifier it self.
Dan

Posted on Aug 27, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wiring diagram for kenwood cd recievers


Hello again Bob,

Searching on pin-out, circuit drawings or schematic ought to get you there... Most the sites I referred you to yesterday still remembered your 97 Celica GT from my previous searches...

Yesterday I forgot to invoke "PRIVATE"... SO I'll be WADING in Celica Adds & ACCOUTERMENTS for a few daze...
(un- CLOAKED)

Happy hunting.

KENWOOD USA

need the pin out diagram for Kenwood CD receiver KDC 128 Audio Car CD...

Your search for kenwood cd receiver returned the following

Mar 04, 2016 | Kenwood Audio Players & Recorders

1 Answer

Display screen not working


Sounds like you might have a bad connection where the faceplate connects to the unit, or the faceplate is bad.

May 21, 2010 | Kenwood KDC-X590 CD Player

1 Answer

I got a used car last year with a Kenwood KDC-692 CD-Reciever installed. Yesterday, my battery died in cold weather. Upon jumping the car, the Kenwood asked for a security code. I have no idea what the...


ok this worked for the kdc-x693 I just did it.first you need the remote. then turn on the car and unit instantly hold the auto button down and rotate the right control knob clockwise untill the display reads this. security clear
code
just like that on the screen.then tap the 5 button on the remote.
that will scroll through the letters on the #5 button then push the >>button on the remote you need to spell kcar out on the screen.

Dec 10, 2009 | Kenwood KDC-X692 Car CD/ MP3 Player

1 Answer

Playing copied cds


go out and get a cd player lense cleaner cd and let it run for the time it gives. It is more than likely a dirty laser lense. Good luck.

Jan 06, 2009 | Kenwood KDC-2011S CD Player

1 Answer

Kenwood KDC-MP922


there is a button under the back of the face in one corner, just press around the back of the face with the car on until you feel the button press in and it should open.

If not you may have a bad ribbon cable that is not too expensive to replace.

Sep 09, 2008 | Kenwood KDC-519 CD Player

1 Answer

Kenwood kdc 3011 rests its self every time i turn the car off


This means that the power lead you connected the red and yellow to is a switched live and each time you turn off the ignition the power goes off and therefore resets. to fix this problem you need to connect the yellow to a permanent 12v supply that stays live when you turn off the ignition.

May 27, 2008 | Kenwood KDC-2011S CD Player

1 Answer

Lost code kenwood auto radio


Hello, I`ve lost the code nummber for my Kennwood Radio. Trying very hard to recive the code number but nobody can seem to help me.Any ideas ?

Mar 07, 2008 | Kenwood KDC-W5534U CD Player

2 Answers

Code for kenwood cd player


get a hold of a kenwood remote that has the alphabet printed on it then enter the code-- KCAR

Oct 14, 2007 | Kenwood KDC-MP228 CD Player

1 Answer

CD player Kenwwood KDC-129


1 kenwood KDC-129 manual as requested: http://www.kenwood-electronics.com.my/imanual/KDC-229.pdf

Aug 28, 2007 | Kenwood KDC-135 CD Player

Not finding what you are looking for?
Kenwood KDC-2011S CD Player Logo

213 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4748 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Pablo Gonzalez

Level 3 Expert

733 Answers

Are you a Kenwood Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...