Question about Siemens WXLP1460 Front Load

1 Answer

F2 error code flashes and machine wont finish the drain cycle

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Siemens Master
  • 1,902 Answers

Hello & Welcome to FixYa

F2 is a drain error in your washer, if the unit is unable to drain then after 4 minutes it will display F2. The first thing that should be done is cleaning the drain hose and the drain pump filter, you can take out three torx screws from the bottom front panel and then clean the area completely, lift up the cap to clean the filter. If the error returns then check the drain pump if it is not working then replacing the pump is recommended repair. Please get back to me if you have any other questions.

Kevin

Posted on May 30, 2011

  • peter mackay
    peter mackay Dec 19, 2015

    if there is no bottom front panel, where is this located

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Kenmore HE3t washer than continues to stop during the cycle and flash the F2 error code even after cleaning out lines, hoses, trap, boot and replacing the drain pump.


It is possible that the brushes on the motor that spins the drum are worn down. The drum will start and stop when this happens. Check the brushes.

Nov 07, 2013 | Kenmore Washing Machines

1 Answer

My washer will not complete the cycle or drain the clothes. It just stops and beeps then flashes an error code like F2.


And F2 translates to: long drain. Make sure the drain hose from the machine is not kinked or plugged. Do you hear the pump running when it is supposed to? Check the drain-pump filter for debris. Replace the pump if it doesn't seem to run. Hope this helps!

Feb 10, 2010 | Whirlpool Duet GHW9150P Front Load Washer

2 Answers

My Asko dishwasher is not draining. Code F2


drain plugged, hose kinked or discharge pump bad

Jan 19, 2010 | Asko D1976 Built-in Dishwasher

1 Answer

Washer giving F2 error during wash cycle, cycle doesnt finish


HI. this code represents a Long Drain issue.

If the drain time exceeds 8 minutes, the water valves are turned off and F02 is flashed.

Press PAUSE/CANCEL twice to clear the display.

NOTE: After 4 minutes the “Sud” error will be displayed, then 4 minutes later the F02 error code will be displayed.

Potential Causes

• Check the drain hose and make sure it is not plugged or kinked
• Check the electrical connections at the pump and make sure the pump is running.
• Check the drain pump filter for foreign objects
• If the above does not correct the problem replace the pump

Oct 26, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Whrilpool duet front loader washer flashes f2


HI. this code represents a Long Drain issue.

If the drain time exceeds 8 minutes, the water valves are turned off and F02 is flashed.

Press PAUSE/CANCEL twice to clear the display.

NOTE: After 4 minutes the “Sud” error will be displayed, then 4 minutes later the F02 error code will be displayed.

Potential Causes

• Check the drain hose and make sure it is not plugged or kinked
• Check the electrical connections at the pump and make sure the pump is running.
• Check the drain pump filter for foreign objects
• If the above does not correct the problem replace the pump..

Aug 13, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

My Whirlpool GHW9100LW started making a strange sound and not wanting to finish the spin cycle about a month ago. up until now it will finish off and on. I cleaned out the thing that twists off in front...


"F02" is a Long Drain error. If the drain time exceeds 8 minutes this error code will be displayed. In addition, a "SUDS" error may also be generated as a secondary error. This is an indication of a drain pump problem and/or clog in the drain line. You will need to check the following:

1. Check the drain hose to make sure it is not kinked or clogged.
2. Check the electrical connections to the pump and ensure the pump is running.
3. Remove the drain pump filter and check for foreign objects and/or debris.

To check the drain pump, click on the following link for step-by-step instructions.


http://www.fixya.com/support/r385844-checking_drain_pump_kenmore_elite_front

If the above procedures do not correct the problem, it is recommended by the manufacturer to replace the drain pump


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Jun 25, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Started getting an F2 error code


I looked up the F02 code online and this is what it says:

If the drain time exceeds 8 minutes, the water valves are turned off and F02 is flashed.

Press PAUSE/CANCEL twice to clear the display.

NOTE: After 4 minutes the “Sud” error will be displayed, then 4 minutes later the F02 error code will be displayed.

Potential Causes

• Check the drain hose and make sure it is not plugged or kinked
• Check the electrical connections at the pump and make sure the pump is running.
• Check the drain pump filter for foreign objects
• If the above does not correct the problem replace the pump


Hope that helps.

May 18, 2009 | Whirlpool GHW9400 Duet Washer

1 Answer

F2 is flashing, still in wash cycle


F02 Long Drain If the drain time exceeds 8 minutes, the water valves are turned off and F02 is flashed.

Press PAUSE/CANCEL twice to clear the display.

NOTE: After 4 minutes the “Sud” error will be displayed, then 4 minutes later the F02 error code will be displayed.

Potential Causes

• Check the drain hose and make sure it is not plugged or kinked
• Check the electrical connections at the pump and make sure the pump is running.
• Check the drain pump filter for foreign objects
• If the above does not correct the problem replace the pump

Apr 15, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

F2 Error - Load not finished


It was a clogged drain. Cleared out the drain hose and the machine restarted at the beginning.

Mar 27, 2009 | Kenmore Washing Machines

Not finding what you are looking for?
Siemens WXLP1460 Front Load Logo

646 people viewed this question

Ask a Question

Usually answered in minutes!

Top Siemens Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1460 Answers

yadayada
yadayada

Level 3 Expert

75817 Answers

shaun taylor

Level 3 Expert

1525 Answers

Are you a Siemens Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...