Question about One For All URC-3021 Remote Control
Code search by device:
Turn on device you want to control (TV, VCR, DVD)
Press and hold the CODE SEARCH button until the red indicator light remains red, then release
Press the desired mode button (TV, VCR, DVD) and release
Press the POWER button slowly, but repeatedly
until device turns off. While doing this, the red indicator blinks then stays lit
Once the device turns off, press and release the Enter button to install code. The remote should be synced to the device.
Someone on another board pointed out that with some newer models you do not need to press the CHANNEL UP button repeatedly. Rather, you press it only ONCE, and the device will cycle through all the code possibilities. When the TV turns off, it means that the proper code has been found. Immediately press the Enter button to install that proper code. This method (and no other) worked for me.
Be sure to rate macapplezoo 100% or whatever you think I deserve!
Posted on May 29, 2011
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Emerson TV codes 0154, 0236, 0463, 0180, 0178,
Emerson TV VCR Combos 0479, 1479, 1278
SEARCHING FOR YOUR CODE
If your device does not respond to the remote control after trying all codes
listed for your brand, or if your brand is not listed at all, try searching for
NOTE: Before performing a code search for a DVD player or a VCR, turn on the device and
insert the required media.
For example, to search for a code for your TV:
1. On the remote control, press TV once.
2. Press and hold SET until the LED (red light) blinks twice,
then release SET.
3. Enter 9 - 9 - 1.The LED will blink twice.
4. Aim the remote control at the TV and slowly alternate
between pressing POWER and TV. Stop when the TV turns off
(after pressing POWER). If the device does not have a Power
key, you can substitute another function, such as digits 0 ~ 9 ,
CH, or PLAY).
NOTE: In the search mode, the remote control will send IR codes from
its library to the selected device, starting with the most popular code
5. To lock in the code, press and release SET.The LED will
6. To search for the codes of your other devices, repeat steps
1 through 5, but substitute the appropriate device key for
the device you are searching for.
here is the maual for your remote:
Posted on Dec 12, 2007
Tips for a great answer:
Jun 08, 2016 | Emerson Televison & Video
Dec 25, 2015 | Emerson Televison & Video
Sep 20, 2012 | GE Remote Original Jc024 Remote Control...
Jan 21, 2010 | Emerson LD195EM8 19 in. LCD TV
Aug 08, 2009 | RCA RCU300WBL Remote Control
Dec 02, 2008 | Televison & Video
Dec 26, 2007 | Televison & Video
81 people viewed this question
Usually answered in minutes!