Hi, i have the samsung qwerty controllerbn59-01134b, first i cant pair with it, say pairing failure, now i not say this but i cant use with de tv, pressing all the buttons the tv not response, in the keyboard appear the text but not to the tv.

Battery error. Replace the batteries.
http://electronicshelponline.blogspot.com/

It needs to be Re-Paired to the TV.

First, fresh batteries, and clean battery contacts if needed.

Then, Try Pairing procedure:

1. TV off
2. Bring remote within 3 feet of TV
3. Push Pairing button (Paper Clip or other pointed object in button hole)
4. Turn on TV
5. Should be paired. Try remote channel or other buttons.
6. If not, try 2 more times.
7. If still not working, push RESET button first and repeat Pairing.

Samsung remotes for LED / LCD TVs are generally RF, not IR.
Most Universal remotes do not generate RF signals, so disregard advice about codes for Universals.

1. TV off

Within 3 feet of TV



PAIRING and RESET buttons:




Please rate if Helpful.

Good Luck !!

It needs to be Re-Paired to the TV.

First, fresh batteries, and clean battery contacts if needed.

Then, Try Pairing procedure:

1. TV off
2. Bring remote within 3 feet of TV
3. Push Pairing button (Paper Clip or other pointed object in button hole)
4. Turn on TV
5. Should be paired. Try remote channel or other buttons.
6. If not, try 2 more times.
7. If still not working, push RESET button first and repeat Pairing.

Samsung remotes for LED / LCD TVs are generally RF, not IR.
Most Universal remotes do not generate RF signals, so disregard advice about codes for Universals.

Please rate if Helpful.

Good Luck !!

PAIRING and RESET buttons:



Within 3 feet of TV

1. TV off

Put in fresh batteries. You have to pair the querty side of the remote again. Go up to your samsung smart TV 8 inches or less to pair. Press SYM and TAB at the same time. You should notice on the querty screen that states "Pairing." Your TV should confirm. The keyboard will load up when you press a key. Follow information on TV screen. Some applications like Netflix do not work with the remote. You can use your Querty side when you press on an app. Scroll to any app. If a screen pops up like for web browsing just type like a keyboard.

You have to pair the querty side of the remote. Go up to your samsung smart TV 8 inches or less to pair. Press SYM and TAB at the same time. You should notice on the screen that it states "Pairing." Your TV should confirm. The keyboard will load up when you press a key. Follow information on TV screen. Some applications like Netflix do not work with the remote. You can use your query side when you press on an app. If a screen pops up like for web browsing just type like a keyboard.

Try updating or reinstalling the drivers which can be downloaded from the manufacture's website

I had the same problem. The following worked for me and the 46d7000 qwerty remote. Try this: unplug TV. Then press power button until the red led turns off (5 sec or so). One themed is off, plug in tv and power on and try the pairing again.

Make sure to hold the remote near the bottom right of the tv. There is a red LED and an IR receiver there. The remote needs to be pointed at this area and within 6 inches of the tv to pair the Bluetooth. Samsung doesn't mention this anywhere and I almost returned the tv before the salesman told me about this.

Hi,

normally, the pairing has to be done once. If successfull, you can not pair the device a 2nd time withou removing it from the "paired devices" list in your phone. In order to get it recognized you should do the following.
1. check that BT is off on both devices
2. turn BT on on your mobile phone
3. power on your headset. In case, you have paired the headset successfully before, it has to be registered in your phone. It should then automatically find for the paired device (your phone in this case) and connect.
Dont try to power on the headset before turning BT on on your mobile phone.
If you have no success try to navigate to the bluetooth settings, check "paired devices" and make sure that your headset is deleted. Do the pairing and the 3 stepps above once again.
Don forget, that the headsets also have to be charged..

ce n'etait pas un casque wireless c'etait de preference un casque bluetooph mais tout es resolu a present je vous remercie.



j'ai rechager mon casque juste pendend quelque minute, pour le mettre en mode pairing j'ai juste apuiyer sur le bouton jusqua ce qu'il devient mauve apres j'ai vite ouvrir le micro qui etait plier pour la lumier mauve soit solide puis je l'ai chercher avec mon telophone apres l'avoir trouver je l'ai connecter et puis tout es bon a present merci