When I turn the camera on, all I am getting is a white screen, whether to take a picture or to see a picture). Help Thx Kevin

the lcd screen turns dim or indistinct,it means it is in a bad condition. the lcd screen needs to be protected properly especially for a long time use.you can buy a new lcd or find a replacement.
http://www.digitalcamera-parts.net/
www.skiliwah.cn/
e-mail:e-8090team@hotmail.com
cindy
thx

You need to check whether the LCD screen is damaged or not. The best way to do this is shoot a picture, and then down load to PC. Check whether the picture is ok or not. If the picture is ok, then LCD is bad. You need to replace your LCD.

If you wan tto do it yourself, the following are some sites for help:
http://camerarepair.blogspot.com/2007/11/fixing-or-replacing-broken-lcd-screen.html
Buy a used camera (one sold for parts) through ebay.com very cheap. Buy a jewellers screwdriver set for $1 from Dollar store. Then replace the LCD.

No. It's simply a menu setting to show you where potentially overexposed highlights in the final image will be. The function can be set to show shadows or highlights.

I don't currently have a manual to hand, but if you can't find how to turn it off in your own manual then report back and I'll have a thorough rummage for one.

I had this problem too, I think it's the shutter problem, it doesn't close
when a picture is taken, therefore, causing the over exposed photo...I've sent it back to canon, still waiting for the reply...

Kevin - Malaysia

check whether can see the picture through vew finder,if yes replace srtip wire from main board to lcd bord

Mine too!
It beeped three times, then went black. then went white and now won't do anything! ahh!

return it asap. It could be something going on with the auto focus or the CCD unit. If you can get it replaced it's easier to do now than later.

we need help with the camera
we cant see the screen,
it turns on, but we cant see the screen

No Problem ABout battery. just take some photographs don mind whether you can see them on LCD Or not. Then Take Outr memmory and chek whether they comes using another camera. If its working then you need to chek with LCD screen Thanks Sangita

I have Fuji FinePix 2650 Digital camera with same problem. I can almost guarantee this is not a firmware problem. I went mountain biking a few months ago and take pictures. I take out camera and turn on. I get lines then white screen. I banged on camera and fixed it. Later a few weeks ago I turn it on and white screen. i beat this thing and get bad menu selection screen for a moment then white again. It takes pictures well and talk to computer no problem but no LCD picture. I thinking it is loose connection for LCD. Send it for repair or if you seek adventure try to fix it yourself!