Question about Arctic Front (ARTICAIR) Air Conditioner

1 Answer

E4 error message on an Artic Front Mobile Airconditioner

Posted by on

  • lisabrewster Jun 01, 2011

    No it wasn't .....

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 17,970 Answers

Isnt any specific description for this barnd; the only thing I have found is this which is from the manufacturers website If unit displays "e4":
1? Check whether the winding resistance and operation current of the compressor are normal.
2?Check whether the high and low pressure is normal when the unit is running.
3?Check (whether the coil pipe sensor is normal) whether the contact of the inserter on the circuit board is well, the coil pipe temperature sensor is fixed, the evaporation of the indoor unit is well, the key is to check the evaporator temperature detected by the coil pipe temperature sensor has reached the cooling or heating temperature.
4?Check whether the surface of the condenser is too dirty, it should be cleaned when it is too dirty.
5?Check whether the capacitance of the outdoor motor and the fan is damaged, it should be replaced when it is damaged.
6?If the above items are normal, the electric control board should be replaced.

Hope helps.

Posted on May 29, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a waves airconditioner. Its not cooling well n after some time show e4 error. How to remove the error? Plz help.


http://acerrorcode.com/tcl-air-conditioner-error-codes.html

This was googled: waves error codes
It showed a page in "images". Stated
"System abnormity" I think. Page was blurry.
Call a tech! Mini splits can be a troubleshooting nightmare! I think its a Fujitsu unit. It would help, and may save you some $$, to call around to find a technician who has worked on mini splits. And maybe find them a 1-800 # that is their tech support # before hand, so if the tech needs it, you have it. E4 is a vague description for a fault. Make sure you have cleaned air filters, cleaned o.d.coil (turn off power at breaker 1st). Changed batteries in remote. Work safe!

Jun 20, 2015 | Heating & Cooling

2 Answers

Error code e4 unit airconditioner


Not sure about E4 , but 4 blinks or flashes usually means the compressor isn't starting properly. It could be a faulty start capacitor or wiring or faulty indoor PCB (Board)

Oct 18, 2013 | Mitsubishi Mr. Slim MXZ30TN Air...

1 Answer

What is E4 error code o. Yonan airconditioner?


My yo nan midwall split aircon is displaying an E8 error code. What is the fault?

Aug 12, 2013 | Heating & Cooling

1 Answer

Error e4 sir air split unit


We have a SirAir Split unit Airconditioner, It's not cooling and shows e4 error.

Feb 27, 2013 | Heating & Cooling

1 Answer

What causes e4 in an airconditioner


Read your instruction manual section troubleshooting for to see the error code.
if you do not have go to www.fitness.manualsonline.com or www. retrevo.com or www. manualsfactory.com

God bless you

May 09, 2012 | Heating & Cooling

2 Answers

My dishwasher says E4


Hi,


The error code E4 means selector switch pads is stuck.
First try a hard reset. Unplug the unit for 10 minutes and then switch on the dishwasher. Most cases you won't get the error message.
If you still get the error message then you need to take to service center to get it repaired. Mostly, the inner connectivity between the pad and circuit board is loose/bad.

Hope this helps.

Shane

Feb 27, 2011 | Kenwood KDW243A Builtin Dishwasher

1 Answer

My airconditioner will not turn on using remote control


Check there will be error code: If not check power to indoor is perfect. Error code details as follows

Code E3
Error detail Remote control transmission error(transmitting error)
Inspected unit Remote control.

Code E4
Error detail Remote control transmission error (signalreceiving error)
Inspected unit Indoor.

Dec 10, 2010 | Mitsubishi MSZ-A15NA Split System Air...

1 Answer

Airtech aircon gives an E4 code and then goes off = what causes this and how do I remedy it


Hi,

Two days ago we had an Air tech Airconditioner installed and it is showing an error FE what is this pls?

Sep 04, 2010 | Heating & Cooling

2 Answers

E4 Error


york hvac unit e4 error code Troubleshooting

Aug 05, 2008 | DeLonghi CF210 Portable Air Conditioner

1 Answer

E4 error message


take off two black covers on bottom front of machine and mop up or soak up any water you feel or see at very bottom of machine by a polystyrene float this will fix it

Dec 27, 2007 | Baumatic 23 in. BDW13 Built-in Dishwasher

Not finding what you are looking for?
Arctic Front (ARTICAIR) Air Conditioner Logo

Related Topics:

138 people viewed this question

Ask a Question

Usually answered in minutes!

Top Arctic Front Heating & Cooling Experts

paulcarew

Level 3 Expert

2458 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Donni Steen

Level 3 Expert

659 Answers

Are you an Arctic Front Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...