Question about Blaupunkt MP3000 CD Player

1 Answer

I need the manual on how to set the radio stations

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 106 Answers

Thttp://www.retrevo.com/support/Blaupunkt-MP3000-Car-Receivers-manual/id/550ci556/t/2/
here is your manual....just click the red download button the fill in your email addy and the code and it will download for you. It is a pdf file so if it wont open you need adobe acrobat reader...d/l that and try again...
for the clock keep pressing disp till you see clock 12----then rotate the dial to select 12 or 24 hr format----then press disp to display clock adjust-------then press muts/sens to flash the hour-----rotate dial to desired hour-----press mute/sens to flash min-----rotate dial for correct min----press disp to complete the time set.

don't forget to give testimonial and the votes 4 thumbs up if I helped.

Posted on May 29, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have just bought a pure radio Elan E3 when I switch on it says no stations found


FM radio settings
Note: You can only see the FM radio settings when you have selected ‘FM’ as the radio source.
FM stereo option
You can choose between stereo or mono reception when listening to FM radio. Mono may improve
clarity where stereo signals are weak.
To change between Stereo or Mono reception:
1. Press the Menu button.
2. Turn and press the Select dial to choose ‘Audio Setting’.
3. Select between ‘Stereo Allowed’ or ‘Forced Mono’.
FM scan
You can choose whether your Elan E3 automatically stops at the next available FM station or the next
available FM station with a strong signal when scanning for an FM station. To change the FM scan
setting:
1. Press the Menu button.
2. Turn and press the Select dial to choose ‘Scan Setting’.
3. Select between ‘Strong Stations Only’ or ‘All Stations’.

DAB settings
Note: You can only see the DAB settings when you have selected ‘DAB’ as the radio source.
Full scan
You can use the ‘Full Scan’ (autotune) function to automatically scan for new digital radio stations and
remove inactive ones.
To carry out an autotune:
1. Press the Menu button.
2. Turn and press the Select dial to choose ‘Full Scan’.The number of stations found will be
displayed during the autotune.
When the autotune has finished, your Elan E3 will tune to the last station that you were listening to. If the
last station you were listening to is no longer available, your Elan E3 will tune into the first station in the
alphabetical list.
Manual tuning
To manually check the signal strength of a known channel:
1. Press the Menu button.
2. Turn and press the Select dial to choose ‘Manual tune’.
3. Turn and press the Select dial to choose the channels.

Nov 07, 2017 | Elan Audio Players & Recorders

1 Answer

Need an owners manual


Is this an auto radio or a home system. Is it a receiver or what?

Aug 23, 2007 | Denon DCT-670

1 Answer

How do I use the Pre-set function for am & fm radio stations ?


press and hold the button you want to assign a station to.

Apr 13, 2016 | Car Audio & Video

1 Answer

Car radio manuals


If there is a "set" button you push that first then the station button.
If not, you push and hold the station button until the sound comes back on.
Check your owners manual for details.

Sep 01, 2014 | 2001 Chrysler PT Cruiser

1 Answer

Cannot activate the radio


Hi,

You need to install the headset then seek for radio ( If this the first time you use the radio, you need to set up the stations also). Or you can use manual search and set the stations then save them.

Regards

Sep 26, 2011 | Nokia C3 Cell Phone

1 Answer

Did not recieved operators manual with dewalt dc011 construction radio. need to know how to set the select channels. 1-2-3-4


1. Select the Radio Station you want to save.
2. Press and hold the Memory button that you want that station on, 1, 2, 3, 4.
The display will flash the station number, when it stops flashing, the channel is set.

Oct 21, 2010 | Dewalt DC011 AM/FM Radio

1 Answer

Radio


Hello george_nutti,

The model number you posted is for a center channel speaker which has no controls, and not knowing the exact model number it's difficult to be specific.

Some Kenwood KDC models allow you to select one of 3 "tuning modes", 1) AUTO1 - Automatic search for stations; 2) AUTO2 - Search Preset stations; 3) MANUAL - Normal manual tuning control. If your Kenwood is one of these models, you need to set the tuning mode to MANUAL. For Kenwood Excelon HD receivers, direct access tuning is done by using the included remote. 1) Press DIRECT button on the remote; 2) Press number buttons to enter desired channel number; 3) Press DIRECT button again to exit direct tuning.

Hope this helps.

Sep 08, 2009 | Kenwood KSC-310CCS Center Channel Speaker...

1 Answer

How do I change the radio station on the radio alarm


Here is the full manual
http://www.timexaudio.com/pdf/T311IB57574_35.pdf

Here are the instructions from the manual.

Setting the Radio Alarm
1. Press and hold the
Radio Alarm Button. The display will flash and the Radio Alarm Indicator will
appear. If you do not begin setting the time within ten seconds of pressing the button, the display will stop
flashing and you will need to press the
Radio Alarm Button again.
2. While the display flashes, press the Reverse and  Forward Buttons to set the wake time. Hold a button
for a few seconds to set the time rapidly. Be sure to set the correct AM/PM time, as shown by the PM Indicator.
3. After setting the radio alarm time, you will need to select the station. First, press the  Radio Band Button
to select a radio frequency. Next, select a station using the Memory Set 1-6 Buttons. For more
information on programming radio stations into memory, see the Programming Radio Station Settings section
of this manual. Rotate the  Volume Thumbwheel to set the wake sound volume.
4. After setting the radio alarm wake time and sound, you will need to select the 7-5-2 setting. The 7-5-2 setting
lets you set the alarm for a full week, weekdays only, or the weekend. Before setting the alarm, be sure that
the correct date is set, as shown in the “Auto-Set” and Manual Time and Date Settings section of the manual.
While the display is still flashing, press the  Date/7-5-2 Button until the desired setting is shown.
5. After you have set the radio alarm wake time, sound, and 7-5-2 setting, press the  Enter Button. The
Radio Alarm Indicator will appear on the display, showing that the radio alarm has been set.

Aug 08, 2009 | Timex T311T Clock Radio

1 Answer

Setting the time


Setting Time
1 Press TITLE repeatedly until the time is displayed.
For details, see “Displaying the Text” (page 13)
2 Press and hold TITLE for at least 2 seconds while
the time is displayed.
The time indication will blink.
3 Turn the Rotary encoder to adjust the hours while
the time indication is blinking.
4 When the hour has been adjusted, press MODE.
5 Turn the Rotary encoder to adjust the minutes
while the time indication is blinking.
The time is automatically set 5 seconds after the minute
adjustment. The time can also be manually set by pressing TITLE.
• To synchronize the clock to another clock/watch or radio time
announcement, press and hold MODE for at least 2 seconds after
setting the “hour.” Minutes will reset to “00”. If the display shows
over “30” minutes when you do this, the time will advance one hour.
Listening to Radio
1 Press SOURCE/POWER until a radio frequency
appears on the display.
2 Press BAND repeatedly until the desired radio band
is displayed.
F1 (FM1) F2 (FM2) AM F1 (FM1)
3 Press TUNE to select the tuning mode.
DX SEEK (Distance mode) SEEK (Local mode)
OFF (Manual mode) DX SEEK
• The initial mode is Distance mode.
Distance mode:
Both strong and weak stations will be automatically tuned in
(Automatic Seek Tuning).
Local mode:
Only strong stations will be automatically tuned in (Automatic
Seek Tuning).
Manual mode:
The frequency is manually tuned in steps (Manual tuning).
4 Press or to tune in the desired station.
Holding down or will change the frequency
continuously.
Manual Storing of Station Presets
1 Select the radio band and tune in a desired radio
station you wish to store in the preset memory.
2 Press and hold, for at least 2 seconds, any one of the
preset buttons (1 through 6) into which you wish
to store the station.
The selected station is stored.
The display shows the band, preset number and station
frequency memorized.
•You will need to start from set up or you will not be able to set the mins

Dec 31, 2008 | Alpine CDE-9852 CD Player

2 Answers

How to change set radio stations


How do you set the stations I don't have a manual on my Pioneer super Tracker 3-D

Oct 17, 2007 | Sony CDX-L400X CD Player

Not finding what you are looking for?
Blaupunkt MP3000 CD Player Logo

244 people viewed this question

Ask a Question

Usually answered in minutes!

Top Blaupunkt Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4869 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Blaupunkt Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...