Question about Washing Machines

1 Answer

AEG Washing machine Oko Lavamat 74620 - shows the error code C9 and will not run.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,917 Answers

Hi,

The C9 on some AEG LAVAMAT models like the 71400, 72600,74620, 86720 and possibly others, is the same as the above F9, and is usually MOTOR BRUSHES WORN OUT. After replacement, you will need to clear the fault indication held in the PROGRAMMER PCB logic: With the Switch in the OFF position - Press and hold PRE-WASH and SOAKING buttons in at the same time, then turn the control knob to Short Spin. Wait one or two seconds and all the indicators should illuminate. Then turn the control knob to OFF. All the indicators should go out. Then try and use your machine as normal. This should clear the C9 error code. If it does not -check there may be another fault present.

Please get back to us if you have further query else please accept the suggestion.
Thank you for contacting fixya.com

Posted on May 29, 2011

  • zakici
    zakici Dec 31, 2012

    thank you!!!

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I correct error code 25 on an AEG OK-LAVAMAT 74640 update washing machine mean?


Family error code "E20" means difficulties in draining, but I never heard for error code E25 on this model. Could be : E21, E23 and E24 error code.

Dado

Aug 24, 2014 | AEG Washing Machines

1 Answer

I have a AEG oko-lavamat 75520 update. It stopped and the code C9 showes on the display. What does the code mean, and is this something I can fix my selfe?


Hi Mrs Willems from retired Englishman in SW France,

According to my list, AEG Lavamat 8*** Series Onwards C9 stands for 'tacho fault' (monitoring the motor speed) requiring a service engineer's attention I suggest. Sorry ;-0(

If this has assisted and/or clarified the situation for you please consider a 4 thumbs up on our rating.
Thanks and good luck!
John C

Aug 16, 2011 | Washing Machines

1 Answer

My washing machine stops and shows C9...what's wrong??? (it's an aeg oko lavamat caresse) Who can help me?? cheers Jan


Hi from retired Englishman in SW France,

AEG Lavamat 'C9' decodes as 'tacho fault' i.e. something wrong with the motor/speed/sensing. Sorry but that looks like an engineer call is required;-0(

If this has clarified the situation and/or assisted you please consider a 4 thumbs up for the rating.
Thanks and good luck!
John C

Apr 29, 2011 | Washing Machines

1 Answer

What does error code c9 mean?


c9 means there is no motor movement, typically worn out motor carbon brushes.

Jul 14, 2010 | AEG Lavamat 72640 Front Load Washer

3 Answers

Error C9


Hello, to cancel the error C9 try to reset the machine by holding the start Button whilst turning the dial through 360 (from Off-2-Off).
Thanks



Jun 04, 2010 | Washing Machines

2 Answers

What means error code "C9" ? AEG Lavamat 76669


Hi,

C9 Indicates Motor Fault. It seems that the Carbon Brushes have Worn out.

Replace it and more likely it would Fix the Problem.Once you replace that, you need to put the machine into Service Mode to Reset the Error.

Steps for Reset the Error Code

1. Press and Hold the Prewash and Soaking Buttons Together.
2. Whilst Holding them, Turn the Dial from Off one Click Anti Clockwise

Note - If problem persists, Check the motor plug for broken wires and check the state of the carbon brushes.

Let me know, if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Feb 28, 2010 | AEG Lavamat 88840 Front Load Washer

1 Answer

My AEG OKO-Lavamat 72600 shows error code C9 what does this mean?


My ariston aqualtic has finnish as language how to change to for ex english

Oct 30, 2009 | AEG Washing Machines

1 Answer

AEG Oko-Lavamat 86820 Update Error code C9


Hello. I got error code C9 on a LAVAMAT 86800. It pumped in water, and it pumps out water. You can select pump in or out....But the motor dont turn. It will not sentrifuge. So I bought new carbon brush'es on the net. One of them were totally wore down. Now it works. They lasted for 10 years.

Jul 04, 2009 | AEG Washing Machines

2 Answers

Aeg oko lawamat


c9 means the motor is not turning the drum. check carbon brushes in the motor.

Oct 29, 2008 | AEG Lavamat 88840 Front Load Washer

3 Answers

AEG LAVAMAT 74620 - Washing Machine CE error code


Replace Water distributor (Dispenser Drawer) then will be Ok

Rafiq

Aug 27, 2007 | Washing Machines

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

337 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

yadayada
yadayada

Level 3 Expert

75005 Answers

Brad Brown

Level 3 Expert

15441 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...